Abstract:In geotechnical and tunneling engineering, accurately determining the mechanical properties of jointed rock holds great significance for project safety assessments. Peak shear strength (PSS), being the paramount mechanical property of joints, has been a focal point in the research field. There are limitations in the current peak shear strength (PSS) prediction models for jointed rock: (i) the models do not comprehensively consider various influencing factors, and a PSS prediction model covering seven factors has not been established, including the sampling interval of the joints, the surface roughness of the joints, the normal stress, the basic friction angle, the uniaxial tensile strength, the uniaxial compressive strength, and the joint size for coupled joints; (ii) the datasets used to train the models are relatively limited; and (iii) there is a controversy regarding whether compressive or tensile strength should be used as the strength term among the influencing factors. To overcome these limitations, we developed four machine learning models covering these seven influencing factors, three relying on Support Vector Regression (SVR) with different kernel functions (linear, polynomial, and Radial Basis Function (RBF)) and one using deep learning (DL). Based on these seven influencing factors, we compiled a dataset comprising the outcomes of 493 published direct shear tests for the training and validation of these four models. We compared the prediction performance of these four machine learning models with Tang's and Tatone's models. The prediction errors of Tang's and Tatone's models are 21.8% and 17.7%, respectively, while SVR_linear is at 16.6%, SVR_poly is at 14.0%, and SVR_RBF is at 12.1%. DL outperforms the two existing models with only an 8.5% error. Additionally, we performed shear tests on granite joints to validate the predictive capability of the DL-based model. With the DL approach, the results suggest that uniaxial tensile strength is recommended as the material strength term in the PSS model for more reliable outcomes.

Prediction of Peak Shear Strength of Natural, Unfilled Rock Joints Accounting for Matedness Based on Measured Aperture

Novel Intelligent Approach for Peak Shear Strength Assessment of Rock Joints on the Basis of the Relevance Vector Machine

Shear behavior of two-order morphology in rock joints

Prediction of Peak Shear Strength of Rock Joints Based on Back-Propagation Neural Network

Experimental and Numerical Investigation on Shear Failure Behavior of Rock-like Samples Containing Multiple Non-Persistent Joints

Neutrosophic Functions of the Joint Roughness Coefficient and the Shear Strength: A Case Study from the Pyroclastic Rock Mass in Shaoxing City, China

An evaluation on Barton-Bandis shear strength criterion for discontinuities in weak materials under low normal stresses

Peak shear strength criterion for mismatched rock joints: Revisiting JRC-JMC criterion

An experimental study of size effect of roughness coefficient on rock joint using push-pull apparatus

Empirical Criterion for Evaluating the Peak Shear Strength of Discontinuity with Different Joint Wall Strengths

A Rapid Field Measurement Method for the Determination of Joint Roughness Coefficient of Large Rock Joint Surfaces

Effectiveness of Matched and Mismatched Natural Rock Joints Using Experimental Direct Shear Tests

Theoretical Model for the Shear Strength of Rock Discontinuities with Non-Associated Flow Laws

A method to predict the peak shear strength of rock joints based on machine learning

Experimental study on the influence of height and dip angle of asperity on the mechanical properties of rock joints

A Roughness Parameter Considering Joint Material Properties and Peak Shear Strength Model for Rock Joints

Experimental study on post-peak stick-slip failure of three different rock joints under direct shear tests

Revisiting Scale Effect on Joint Roughness Coefficient and Shear Strength Considering Sampling Methods and Geometric Characteristics

Coupled Hydro-Mechanical Behaviour of Rock Joints During Normal and Shear Loading

3D Morphology Reconstruction of Rock Joints from 2D Profile Measurement by a Profilograph

Study on Mechanical Model for Postpeak Shear Behavior of Rock Joints Based on Degradation Characteristics of the 3D Morphology