Abstract:Nowadays, the clean energy is of special concern researches owing to the unavoidable environmental pollutions. To satisfy the demand of sustainable development strategy, it is necessary to develop high-efficient and portable energy storage and conversion devices. Lithium ion batteries (LIBs) are considered as most promising electrochemical energy storage system in this era and are anticipated to power the mentioned applications. Herein, a facile and effective route has been developed for synthesis of CoO/reduced graphite oxide (RGO) composites as LIB anodes. In the synthesis, the GO prepared by the modified Hummers' method was dissolved into deionized water, and then mixed with Co(NO3)(2) solution. Subsequently, the obtained homogeneous solution was transferred into 100 mL Teflon-lined stainless-steel autoclave. The sealed autoclave was putted into an oven at 160 degrees C for 6 h. After cooled down to room temperature, the precursor of depositions were filtered, washed with deionized water and dried at 80 degrees C. Finally, the precursor was thermal treated at 500 degrees C for 2 h in a tube furnace under nitrogen ambient to obtain the final product of CoO/RGO composites. The synthetic composites were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). XRD patterns proved that the composites were composed of CoO and graphene. SEM images indicated the CoO nanoparticles grown on the graphene nanosheets uniformly. The CoO nanoparticles loaded on the surface of graphene nanosheets could prevent the aggregation of graphene. Meanwhile, the graphene nanosheets could combine with each other to form a large 3D electron conductive network, which can promote the electrical conductivity of the composite. The LIB was assembled in glove-box, in which the composite electrode and metal lithium plate were used as the anode and the cathode, respectively. The electrochemical test results imply that the initial discharge specific capacity could be up to 1312.6 mAh.g(-1) at a current density of 100 mA.g(-1). Notably, the discharge specific capacity is still about 557.4 mAh.g(-1) after 300 cycles at a high current density of 10000 mA.g(-1). It is demonstrated that the composite exhibits high specific capacity, excellent rate capability and well cyclic stability. The 3D network could be used as a stable framework to accommodate the volume change of active material during Li+ insertion/extraction, which play important role for the superior electrochemical performance.

Hydrothermal Preparation of Homogeneous Cobalt Oxide Nanomaterials as Stable Anodes for Superior Lithium Ion Batteries

Synthesis of Co3O4@SnO2@C core-shell nanorods with superior reversible lithium-ion storage

Nanostructured hybrid cobalt oxide/copper electrodes of lithium-ion batteries with reversible high-rate capabilities

Preparation and Electrochemical Performance of Nanosized Co3O4 Via Hydrothermal Method

Ultrasonic Synthesis of CoO/graphene Nanohybrids As High Performance Anode Materials for Lithium-Ion Batteries

Controllable synthesis of core-shell Co@CoO nanocomposites with a superior performance as an anode material for lithium-ion batteries

Ionothermal Synthesis of Cobalt Vanadate Nanoparticles As High-Performance Anode Materials for Lithium-Ion Batteries

Micro-/Nanostructured Co3O4 Anode with Enhanced Rate Capability for Lithium-Ion Batteries

Solution combustion synthesis of a nanometer-scale Co<sub>3</sub>O<sub>4</sub> anode material for Li-ion batteries

Engineering Hollow Cobalt Oxide Nanospheres with Porous Carbon Coating for Stable Lithium Storage

Hydrothermal Synthesis of Rod‐like CoMoO4 and Its Excellent Properties for the Anode of Lithium‐ion Batteries

One-pot Synthesis of CoO/C Hybrid Microspheres As Anode Materials for Lithium-Ion Batteries

Nanoporous Composites of CoO x Quantum Dots and ZIF-Derived Carbon as High-Performance Anodes for Lithium-Ion Batteries

High electrochemical performance and structural stability of CoO nanosheets/CoO film as self-supported anodes for lithium-ion batteries

Well-Dispersed Co/CoO/C Nanospheres with Tunable Morphology as High-Performance Anodes for Lithium Ion Batteries

Excellent Performance in Lithium-Ion Battery Anodes: Rational Synthesis of Co(CO<sub>3</sub>)<sub>0.5</sub>(OH)0.11H<sub>2</sub>O Nanobelt Array and Its Conversion into Mesoporous and Single-Crystal Co<sub>3</sub>O<sub>4</sub>

Ultrasmall Co3O4 nanoparticles as a long-lived high-rate lithium-ion battery anode.

A novel hierarchical network-like Co3O4anode material for lithiumbatteries

Nanoparticle Decorated Ultrathin Porous Nanosheets as Hierarchical Co3O4 Nanostructures for Lithium Ion Battery Anode Materials

Hydrothermal Preparation of CoO/Ti3C2 Composite Material for Lithium-Ion Batteries with Enhanced Electrochemical Performance

Hydrothermal for Synthesis of Coo Nanoparticles/Graphene Composite As Li-Ion Battery Anodes