Abstract:Asphaltenes tend to aggregate to nanoparticles or clusters in crude oil and solvents over a wide concentration and temperature range. In the present paper, asphaltenes extracted from the base asphalt was used as a filler to introduce into epoxy resin. The microstructure and evolution of asphaltenes aggregation in the epoxy resin were observed using laser scanning confocal microscopy. Furthermore, the effect of asphaltenes on the viscosity, dynamic mechanical behavior, thermostability, mechanical properties of epoxy resin was evaluated by Brookfield rotational viscometer, dynamic mechanical analysis, thermogravimetric analysis and universal testing machine. The presence of asphaltenes increased the viscosity of the neat epoxy during all stages of cure reaction. The viscosity of epoxy/asphaltenes composites increased with the filler concentration. Fractal asphaltenes aggregation formed in the composites with 1 mass% asphaltenes. Network microstructures of asphaltenes aggregation appeared in the epoxy phase with a further increase of asphaltenes content. Moreover, the increase of asphaltenes loading resulted in denser network microstructures in the epoxy matrix. Aggregation evolution revealed that asphaltenes particles redispersed evenly in the epoxy resin in the form of some aggregates at the beginning of curing. During the cure reaction of epoxy, asphaltenes aggregates started to agglomerate and grow to network microstructures. The presence of asphaltenes led to the enhancement of the storage modulus of the neat epoxy at the rubbery stage. The glass transition temperature (T-g) of the epoxy composites slightly increased with the increase of asphaltenes loading. The epoxy composite with 5 mass% asphaltenes had higher T-g than the neat epoxy. The inclusion of asphaltenes had a negligible effect on the damping properties and thermal stability of the neat epoxy. The aggregation and heterogeneous dispersion of asphaltenes resulted in the decrease of the tensile strength and elongation at break of the neat epoxy. However, the inclusion of asphaltenes significantly enhanced Young's modulus of the neat epoxy. Young's modulus of the neat epoxy was increased by more than fourfold with the addition of 5 mass% asphaltenes.

Influence of epoxy soybean oil modified nano-silica on the compatibility of cold-mixed epoxy asphalt

Research on compatibility mechanism of biobased cold-mixed epoxy asphalt binder

Behavior of epoxy resin filled with nano-SiO<sub>2</sub> treated with a Eugenol epoxy silane

Enhancing the compatibility of cold-mixed epoxy asphalt binder via graphene oxide grafted plant oil-based materials

Revealing compatibility mechanism of nanosilica in asphalt through molecular dynamics simulation

Microstructure and Dynamic Mechanical Properties Epoxy/asphaltene Composites

Analysis of interfacial adhesion properties of nano-silica modified asphalt mixtures using molecular dynamics simulation

Epoxy-ended hyperbranched polymer-grafted graphene oxide for cold-mixed epoxy asphalt modification

Curing behavior and mechanical properties of an eco-friendly cold-mixed epoxy asphalt

Study on the micromorphologies and structural evolution in cold-mixed epoxy asphalt

Influence of curing agent ratio, asphalt content and crosslinking degree on the compatibility and component distribution of epoxy asphalt in compound curing agent system

Compatibility Studies On Polymer/Wax And Polymer/Resin-Asphaltene By Viscometry And Photomicrography

Insights into the synergistic mechanism of reactive aliphatic soft chains and nano‐silica on toughening epoxy resins with improved mechanical properties and low viscosity

Ethylene Vinyl Acetate Copolymer Modified Epoxy Asphalt Binders: Phase Separation Evolution and Mechanical Properties

Synergistic Effects of Epoxidized Soybean Oil and Polyester Fiber on Crumb Rubber Modified Asphalt Using Response Surface Methodology

Laboratory Investigation on the Microstructure and Performance of SBS Modified Epoxy Asphalt Binder

Fabrication of fire-retarded epoxy asphalt composites with compatibilization and toughening for road tunnel pavements

Study on Physical Properties, Rheological Properties, and Self-Healing Properties of Epoxy Resin Modified Asphalt

Effect Of Organosilane Coupling Agents On Microstructure And Properties Of Nanosilica/Epoxy Composites

Effect of epoxy value on the rheological properties and microcosmic mechanism of WER emulsified asphalt

Characterization of thermosetting epoxy modified asphalt adhesives