Abstract:Highlights • Unique physical modelling is designed to explore the effects of retained material on the impact, overflow and landing mechanisms. • An analytical model is introduced to evaluate the variations of flow velocity and flow depth after interacting with the retained materials and to calculate the peak impact force on the obstacle. • It is demonstrated that existing overflow model can underestimate the landing distance by up to 30%, and therefore is insufficient in the design of dam when there is retained material. • The recommended correction factor R = 0.7 by previous studies for quantifying C r in landing models can overestimate the energy dissipated from geophysical flow impacting the flume bed. During long-term operation, the performance of obstacles would be changed due to the material accumulating upslope the obstacle. However, the effects of retained material on impact, overflow and landing dynamics of granular flow have not yet been elucidated. To address this gap, physical flume tests and discrete element simulations are conducted considering a range of normalized deposition height h 0 / H from 0 to 1, where h 0 and H represent the deposition height and obstacle height, respectively. An analytical model is modified to evaluate the flow velocity and flow depth after interacting with the retained materials, which further serve to calculate the peak impact force on the obstacle. Notably, the computed impact forces successfully predict the experimental results when α ≥ 25°. In addition, the results indicate that a higher h 0 / H leads to a lower dynamic impact force, a greater landing distance L , and a larger landing coefficient C r , where C r is the ratio of slope-parallel component of landing velocity to flow velocity just before landing. Compared to the existing overflow model, the measured landing distance L is underestimated by up to 30%, and therefore it is insufficient for obstacle design when there is retained material. Moreover, the recommended Cr in current design practice is found to be non-conservative for estimating the landing velocity of geophysical flow. This study provides insightful scientific basis for designing obstacles with deposition.

Numerical simulation of rockfalls colliding with a gravel cushion with varying thicknesses and particle sizes

Characterization and prediction of the effects of random factors on buffering efficiency in slope-cushion layer collisions through the discrete element method

Study on dynamic response of cushion layer-reinforced concrete slab under rockfall impact based on smoothed particle hydrodynamics and finite-element method coupling

Numerical Simulation of Dynamic Damage and Stability of a Bedding Rock Slope under Blasting Load

The buffering performance of a flexible buffer-sand layer composite cushion used for rockfall shed: experimental and numerical investigation

Comprehensive Mitigation and Control of Rockfall Hazard

Shape Effect of Rockfall Impacting Sandy Soil Cushion Layer–Reinforced Concrete Slab Composite Structure

Research on the Impact Force of Rockfall Impacting Sand Cushions with Different Shapes

Effects of Particle Size and Cushioning Thickness on the Performance of Rock-Filled Gabions Used in Protection Against Boulder Impact

Discrete element modeling of rock-filled gabions under successive boulder impacts

Evaluation models of rockfall trajectory

Experimental and numerical investigations on buffer performance of geofoam subjected by the impact of falling rocks with respect to different shapes

Effects of retained dry material on the impact, overflow and landing dynamics

Full-Scale Impact Test and Numerical Simulation of a New-Type Resilient Rock-Shed Flexible Buffer Structure

Effects of particle breakage on rockslide deposition formations: insights from rigid finite element modelling

Rockfall analysis considering coefficients of restitution based on three-dimensional sphere discontinuous deformation analysis

Laboratory study on the influencing factors and their control for the coefficient of restitution during rockfall impacts

Numerical Investigation of Abrasive Water Jet Rock Damage Characteristics That Considers the Shape, the Interaction and the Fragmentation of Abrasive Particles

Consideration of the Maximum Impact Force Design for the Rock-Shed Slab

Impact resistance performance and optimization of the sand-EPE composite cushion in rock sheds

A parabolic model and an iterative algorithm for the slab-cushion interface and the application in simulating the dynamic separation between the face slabs and cushion layer