Dynamic Characteristics of Downhole Bit Load and Analysis of Conversion Efficiency of Drill String Vibration Energy

Yuqiang Xu,Hongning Zhang,Zhichuan Guan

DOI: https://doi.org/10.3390/en14010229

IF: 3.2

2021-01-04

Energies

Abstract:The longitudinal vibration of the drill pipe contains considerable energy which can be used to improve the rock-breaking efficiency during drilling. It is very important to the development of drilling speed-up tools to have a comprehensive understanding of the energy conversion efficiency of downhole drill string vibration. In this paper, the characteristics of downhole bit load and longitudinal vibration of drill string under different conditions were studied in the experiment, and the analysis method of energy conversion efficiency from drill string vibration to spring potential energy was proposed. The experimental analysis showed that the fluctuation of the downhole bit load was reduced by 10%–90% after the spring was installed in the bottom hole assembly. The rotation rate and the spring elastic stiffness had a significant and positive influence on the fluctuation amplitude of the downhole bit load. Meanwhile, the longitudinal vibration amplitude and acceleration of the drill string peaked at the elastic stiffness of 1 kN/mm. The closer the spring position to the drill bit was, the more severe the longitudinal vibration of the drill string above the spring component was. The bit load and the rotation rate had a positive influence on the severity of longitudinal vibration. The analysis of energy conversion efficiency showed that the available mechanical energy range of the longitudinal vibration of the drill pipe was about 200–420 kW. The work power of the drill string vibration to the spring component increased sharply and then decreased with the increasing of elastic stiffness. The energy conversion efficiency came to the optimal value when the elastic stiffness was between 1 kN/mm and 2 kN/mm. Increasing the rotation rate, keeping the bit load below 134.5 kN and installing the spring component near the drill bit are beneficial for improving the energy conversion efficiency of drill string vibration. This paper reveals the main factors affecting the energy conversion efficiency of drill string vibration and their influencing laws, and determines the range of WOB, rotation speed, spring position and stiffness to obtain the best energy conversion efficiency.

energy & fuels

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the influence of the longitudinal vibration of the drill pipe on the down - hole bit load during the drilling process, and how to effectively use the vibration energy of the drill pipe to improve the rock - breaking efficiency. Specifically, the paper studies the dynamic characteristics of the down - hole bit load and the energy conversion efficiency of the longitudinal vibration of the drill pipe under different conditions, aiming to propose a method for evaluating the conversion efficiency from the drill pipe vibration to the spring potential energy through experimental analysis. The main purpose of the research is to reveal the main factors affecting the energy conversion efficiency of the drill pipe vibration and their influence laws, and to determine the range of bit pressure, rotation speed, spring position and stiffness for obtaining the best energy conversion efficiency, so as to provide an experimental research basis and an effective evaluation method for the rational and efficient use of the vibration energy of the drill pipe.