Abstract:Fiber reinforced polymer (FRP) composite structures are widely being used in aircraft wings, wind turbine blades, helicopter rotor blades and tail rotors. These structures are often exposed to external dynamic loads which shorten their lifetime. Carbon nanotubes (CNT) reinforced epoxy resin have distinctive characteristic in providing a significant increase in mechanical properties and stiffness of the FRP composite. The present study investigates the micro, macro and structural analysis of composites with and without reinforcement of multi walled carbon nanotubes (MWCNT). The carboxylic acid (COOH) functionalized MWCNT with more than 95% chemical purity having average dimensions of 17 nm outer diameter and 10 μm length were used to characterize their chemical properties and evaluate the mechanical and free and forced vibration response of composites with and without MWCNT reinforcement. Initially, the powder form of the MWCNT was taken for the identification of true density (ρ) using the gas displacement technique. The COOH-MWCNT were then randomly dispersed in low viscosity epoxy resin (LY556) through an organic solvent using the ultrasonic liquid processor. Test samples were fabricated by adding the hardener (HY951) at 10:1 ratio in the sonicated solution to obtain the Young's Modulus (E) of MWCNT using Nano Indentation. Following this, Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM), Fourier Transform Infrared spectroscopy (FT-IR), Thermo gravimetric analysis (TGA) were also used to quantify the dispersion, distribution, structural integrity, aspect ratio, functional group and purity level of nanotubes. Further, the impact hammer test based on ASTM E1876, tensile test based on ASTM D3039 and free and forced vibration analysis of the hybrid composite beams were carried out to identify the elastic properties, fundamental natural frequencies, damping ratio and transverse deflection of the hybrid structure. It was shown that the addition of 1 wt% of COOH-MWCNT in fiber reinforced composite beam increases the stiffness of the structure and consequently increases the natural frequencies and damping at each resonant response dominant peaks. The strong adhesion of bonding and proper dispersion of CNTs in the wide surface area of composite strengthen the polymer composites substantially than those of the Glass/epoxy composite structures without reinforcement of MWCNT.

Computational analysis of the effects of carbon nanotubes on the bending, buckling, and vibration characteristics of carbon fabric/polymer hybrid nanocomposite plates

Influence of carbon nanotubes on thermal expansion coefficient and thermal buckling of polymer composite plates: experimental and numerical investigations

Agglomerated carbon nanotubes effects on buckling behavior of fiber metal laminated nanocomposite shells

Impact of Winkler-Pasternak foundation parameters on the buckling behavior of composite plates reinforced with FG-CNT in a parabolic distribution

Design of Laminated Composite Plates with Carbon Nanotube Inclusions against Buckling: Waviness and Agglomeration Effects

Buckling analysis of sandwich plates reinforced with various loading of multi-walled carbon nanotubes

Critical buckling temperature and force in porous sandwich plates with CNT-reinforced nanocomposite layers

Influence of the CNT addition on the mechanical performance of three-phase composite plates

Elastic foundation effects on dynamic characteristics of agglomerated hybrid laminated truncated conical nanocomposite panels and shells

Determination of thermoelastic stress wave propagation in nanocomposite sandwich plates reinforced by clusters of carbon nanotubes

Free vibration analysis of polyethylene/CNT plates

Dynamic and buckling analysis of polymer hybrid composite beam with variable thickness

Material and Mechanical Characterization of Multi-Functional Carbon Nanotube Reinforced Hybrid Composite Materials

Nonlinear static analysis of CNT/nanoclay particles reinforced polymer matrix composite plate using secant function based shear deformation theory

Free vibration analysis of rotating sandwich panels with carbon nanotubes reinforced face sheets and honeycomb core in thermal environments using finite element method

Thermoelastic Behavior of Sandwich Plates with Porous Polymeric Core and CNT Clusters/polymer Nanocomposite Layers

CNT-woven glass fiber laminated composite for folded plate application: 2D-GDQ and experimental study

Influence of microstructural and environmental factors on the buckling performance of carbon nanotube-enhanced laminated composites: A multiscale analysis

Studying the effect of design microscale factors on the thermoelastic response of carbon nanotube-reinforced metal nanocomposites using the finite element micromechanics method

Effect of carbon nanotubes modification on bending fatigue properties of carbon fiber reinforced polyimide composites

Large deflection response-based geometrical nonlinearity of nanocomposite structures reinforced with carbon nanotubes