Abstract:The objective of this study was to optimize the production of powdered avocado using foam mat drying. In order to achieve this, the effect of Emustab® (4, 6, and 8% w/w), goat's milk (10, 15, and 20% w/w), and whipping time (15, 20, and 25 min) on the foam physical properties of avocado pulp were evaluated. In addition, the influence of ethanol pretreatment on the drying kinetics, thermodynamic properties, and physicochemical characteristics of the powders was also assessed. An experimental design 23 with three central points was used in this study and optimized foam conditions were dried at 50, 60, and 70°C, with a fixed air speed of 1.5 m/s. Empirical and diffusive models (boundary conditions of the third type) were adjusted to the experimental data to describe the drying kinetics and to determine the process activation energy and thermodynamic properties. The final products were characterized regarding their physical properties. Optimized foam mat drying conditions were achieved when avocado pulp was whipped for 15 min and 8% of Emustab® and 20% of powdered goat milk were used as foaming agents. The use of an ethanol pretreatment and higher drying temperature (70°C) resulted in higher drying rate (1.6 × 102 /min) and shorter processing time (270 min). The ethanol pretreatment reduced the activation energy and Biot number and led to more uniform moisture distribution. The physical properties, such as water content, water activity, bulk, and tapped densities decreased with an increase in drying temperature and pretreatment with ethanol, whereas water absorption capacity increased. PRACTICAL APPLICATION: In this work, new information about the drying kinetics and mass transfer of the foam mat avocado pulp using ethanol as pretreatment is obtained. The results will contribute to the optimization production avocado foaming and powder. Ethanol pretreatment can represent an alternative to minimize the negative impacts on drying process and can be surely suggested as an industrial application.

Effect of foaming agent concentration and drying temperature on biochemical properties of foam mat dried tomato powder

EFFECT OF FOAMING AGENT CONCENTRATION AND FOAM STABILIZER ON THE FOAMING CAPACITY AND PHYSICAL PROPERTIES OF TOMATO POWDER AT DRIED AT DIFFERENT TEMPERATURE

Enhancing mass transfer and preserving heat-sensitive quality of mango through foam mat drying

Changes in mango foam morphology and its effects on texture and selected phenolics during foam mat drying

Optimization of foaming process for development of modified aloe polysaccharide (MAP) juice and powder using foam-mat drying

Analysis of energy consumption, heat and mass transfer, drying kinetics and effective moisture diffusivity during foam-mat drying of mango in a convective hot-air dryer

Impact of Foam-Mat Drying on Plant-Based Foods Bioactive Compounds: a Review

Foam-mat drying technology: A review

DRYING OF CHERRY LAUREL JUICE USING FOAM MAT DRYING TECHNIQUE AND INVESTIGATING THE EFFECT OF DRYING TEMPERATURE ON DRYING CHARACTERISTICS AND BIOACTIVE COMPONENTS

Optimization of foaming process: drying behaviour, physicochemical, and powder properties of hot air-assisted foam-mat dried nectarine

Foaming characteristics and impact of ethanol pretreatment in drying behavior and physical characteristics for avocado pulp powder obtained by foam mat drying

Production of foam-mat dried chili shrimp paste and its properties

Foam mat drying: Recent advances on foam dynamics, mechanistic modeling and hybrid drying approach

Impact of hydrocolloid and foaming agent on the physicochemical, microstructural and bioactive characteristics of foam‐mat freeze‐dried tapai (fermented black glutinous rice) powder

Comparision of modified temperature controlled microwave assisted foam-mat drying on thermo-physical and physico-chemical of orange powder

OPTIMIZING FOAMING PROPERTIES AND FOAM MAT DRYING PROCESS OF CRANBERRY PULP: RSM AND TOPSIS APPROACH

Foam-mat drying of black soldier fly larvae: optimisation of foaming, drying kinetics, and powder characteristics

Optimization of process parameters for foam mat drying of black rice bran anthocyanin and comparison with spray- and freeze-dried powders

Preparation of High-Grade Powders from Tomato Paste Using a Vacuum Foam Drying Method

The Effect of Temperature and Concentration of Foaming Agent to the β-Carotene Content in Product Derived from Carrots

Optimized Eco-Friendly Foam Materials: A Study on the Effects of Sodium Alginate, Cellulose, and Activated Carbon