Abstract:The adsorption of weighty metal particles from contaminated water sources has garnered significant attention due to its critical role in environmental remediation and ensuring safe drinking water. Heavy metal ions can be removed from water using conventional adsorbents such as activated zeolites; however, these materials have low absorption and slow kinetics. To solve these issues, carbon-based adsorbents that exhibit easy synthesis, high porosity, design ability, and stability have been proposed. In this review, a carbon-based adsorbent, named M-NC, and graphene oxide were created for the particular evacuation of weighty metal particles. To increase the potential for Heavy Metals (HM) immobilization, sulfide-modified biochar was created via a process called synchronous carbon layer epitome. A hypothetical physicochemical and thermodynamic examination of the adsorption of weighty metals Zn 2+ , Cd 2+ , Ni 2+ , Ag 2+ , Pb 2+ and Cu 2+ on carbon-based adsorbents was done with factual material science fundaments. The biochar with large surface areas is utilized to eliminate weighty metal particles, quite possibly the most significant heavy metal pollutants, from aqueous solutions. The limit of the adsorbent for eliminating weighty metal ions was concentrated on utilizing Langmuir adsorption isotherm under ultrasound-helped conditions. The Mesoporous Silica Nanoparticles (MNCs) can be applied to the Langmuir model and pseudo-second-order kinetics. It is possible to use the Langmuir and second-order kinetic equations to accurately explain the adsorption method. Thermodynamic limitations were also envisioned because sorption is exothermic when it happens spontaneously. A homogeneous measurable physical science adsorption typically was utilized to describe and analyze the experimental heavy metal removal isotherms at 30°C and pH 5 utilizing adsorbents produced by pyrolysis of biomasses (broccoli stalks). The experimental results were investigated in terms of Langmuir and pseudo-2nd-order kinetic equations, Freundlich and isotherm models. The outcome of pH, initial heavy metal ion concentration, contact time, and adsorbent dosage regarding the adsorption capacity and removal efficiency of Pb 2+ and Cd 2+ on the hydrogel was examined. This study contributes to the advancement of information in the ground of environmentally friendly heavy metal removal techniques, specifically focusing on the usage of biomass-based adsorbents. These findings have the potential to address the need for effective solutions in water purification and environmental cleanup efforts.

Multiple heavy metal removal simultaneously by a biomass‐based porous carbon

Double-layer magnetized/functionalized biochar composite: Role of microporous structure for heavy metal removals

Sorghum-Waste-Derived High-Surface Area KOH-Activated Porous Carbon for Highly Efficient Methylene Blue and Pb(II) Removal.

Effective removal of heavy metals from aqueous solutions using activated biomass: Analytical interpretation via molecular dynamic simulation, mathematical and statistical approaches

Removal of heavy metals using lichen-derived activated carbons: adsorption studies, machine learning, and response surface methodology approaches

Comparison of biochars derived from different types of feedstock and their potential for heavy metal removal in multiple-metal solutions

Removal of Fe and Mn from Co leach solutions by adsorption on activated carbon based on post-consumer polyethylene terephthalate (PET) - Mechanism insights through linear and nonlinear isotherm and kinetic models

Conversion of char from pyrolysis of plastic wastes into alternative activated carbons for heavy metal removal

Sulfur-Doped Binary Layered Metal Oxides Incorporated on Pomegranate Peel-Derived Activated Carbon for Removal of Heavy Metal Ions

Improving the sorption properties of mesoporous carbons for the removal of cobalt, nickel and manganese from spent lithium-ion batteries effluent

Adsorption of heavy metal ions by carbon-based adsorbent using magnetic nitrogen-doped carbon and graphene oxide

Adsorption of heavy metal onto biomass-derived activated carbon: review

Agro-waste based biomass residues valorization for effective adsorption of heavy metal

Superefficient Removal of Heavy Metals from Wastewater by Mg-Loaded Biochars: Adsorption Characteristics and Removal Mechanisms

Optimization of the raw materials of biochars for the adsorption of heavy metal ions from aqueous solution.

Kaolinite-Composited Biochar and Hydrochar as Low-Cost Adsorbents for the Removal of Cadmium, Copper, Lead, and Zinc from Aqueous Solutions

Effective removal of heavy metals from water using porous lignin-based adsorbents

Waste biomass derived carbon supported Mo 2 C/C composite materials for heavy metal adsorption and hydrogen evolution reaction

Biochar with nanoparticle incorporation and pore engineering enables enhanced heavy metals removal

Adsorption of Hexavalent Chromium Using Activated Carbon Produced from Sargassum ssp.: Comparison between Lab Experiments and Molecular Dynamics Simulations

Humulus scandens-Derived Biochars for the Effective Removal of Heavy Metal Ions: Isotherm/Kinetic Study, Column Adsorption and Mechanism Investigation