Abstract:Lithium–sulfur batteries (LSBs) suffer from sluggish reaction kinetics of sulfur-containing species and loss of soluble polysulfides (PSs) during cycling, especially in the case of liquid electrolytes. Here, we improve the kinetics of sulfur species by decorating Mo2C nanoparticles on carbon nanotubes (CNTs) as the host for sulfur active mass. In addition, by use of gel polymer electrolytes (GPEs) derived from in situ polymerization of 1,3-dioxolane (DOL) to mitigate the diffusion of PSs and improve the stability of Li stripping/plating. As a result, the sulfur cathodes are endowed with enhanced initial specific capacity and suppressed dissolution of sulfur species. The cells with CNT/Mo2C/S cathodes and GPE exhibit excellent electrochemical performance. The anodes cycled with GPE show remarkably enhanced lithium plating-stripping behavior. Benefitting from the synergistic effect, LSBs with higher energy density and improved durability are obtained, demonstrating a new approach for developing high-performance quasi-solid-state Li metal batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c14629.DFT computational method; TEM images of CM-0, CM-10, CM-20, and CM-40; TEM and elemental mapping images of CM-20; TGA curves of CM-0, CM-10, CM-20, and CM-40; pore size distribution curves of CM-20; survey scans spectra of CM-0 and CM-20; Raman spectra and FTIR spectra of CM-0, CM-10, CM-20, and CM-40; schematic diagram of the polymer polymerized by DOL; FTIR spectra of DOL before and after polymerization; SEM images of the PP separator and PP separator with GPE of the cycled cell; initial model of CNTs and Mo2C; electrochemical impedance plot of the cells with CM-0/S and CM-20/S; Mo 3d XPS spectra of the cycled CM-20/S cathode; permeation behavior of Li2S6 in GPE after 0 and 48 h; and cyclic performance of cell with CM-20/S at 1.0C (PDF)This article has not yet been cited by other publications.

Immobilization and kinetic promotion of polysulfides by molybdenum carbide in lithium-sulfur batteries

Balancing the Seesaw: Investigation of a Separator to Grasp Polysulfides with Diatomic Chemisorption.

Regulating Electrocatalytic Polysulfides Redox Kinetics through Manipulating Surface Electronic Structure of Molybdenum-Based Catalysts for High-Performance Lithium-Sulfur Batteries

Synergistic Polysulfides Adsorption–Conversion with Mo2C–MoO2 Heterostructure for Kinetically Enhanced Lithium–Sulfur Battery

Immobilization and Kinetic Acceleration of Lithium Polysulfides by Iodine-Doped MXene Nanosheets in Lithium–Sulfur Batteries

Heterostructure Mo2C/α-MoO3/G Catalyst Based Heterogeneous Catalysis/deposition Mechanism for High-Performance Li-S Battery

Mitigation of Shuttle Effect in Li-S Battery Using a Self-Assembled Ultrathin Molybdenum Disulfide Interlayer.

Promoting Polysulfide Redox Kinetics by Tuning the Non-Metallic P-Band of Mo-based Compounds

Constructing a Catalytic Reservoir Using Cobalt Nanoparticles-Mos2@nitrogen Doped Carbon Nanotubes on the Separator to Immobilize Polysulfides and Accelerate Their Conversion for Lithium-Sulfur Batteries

Synergistic mediation of polysulfide immobilization and conversion by a catalytic and dual-adsorptive system for high performance lithium-sulfur batteries

Enhanced Chemical Immobilization and Catalytic Conversion of Polysulfide Intermediates Using Metallic Mo Nanoclusters for High-Performance Li-S Batteries.

Mo2C Electrocatalysts for Kinetically Boosting Polysulfide Conversion in Quasi-Solid-State Lithium-Sulfur Batteries

Electrocatalysis on Separator Modified by Molybdenum Trioxide Nanobelts for Lithium–Sulfur Batteries

Sulfide-based MOF material modification of separators: enhancing performance of lithium-sulfur batteries by suppressing shuttle effect

Regulating Polysulfide Transformation and Stabilizing Lithium Anode Using [PMo 12 O 40 ] 3− Cluster@Carbon Nanotube‐Modified Separator for Lithium‐Sulfur Batteries

1T-rich MoS 2 nanosheets anchored on conductive porous carbon as effective polysulfide promoters for lithium–sulfur batteries

Bifunctional Atomically Dispersed Mo-N2/C Nanosheets Boost Lithium Sulfide Deposition/Decomposition for Stable Lithium-Sulfur Batteries.

Mo 2 C Electrocatalysts for Kinetically Boosting Polysulfide Conversion in Quasi-Solid-State Lithium–Sulfur Batteries

Cobalt-doped molybdenum sulfide as an interlayer facilitates polysulfide conversion to obtain high-performance lithium−sulfur batteries

Ordered Dual-Channel carbon embedded with molybdenum nitride catalytically induced High-Performance Lithium-Sulfur battery

Suitable polysulfides adsorption and conversion on MoSe2@g-C3N4 interlayer for advanced lithium-sulfur batteries