Abstract:The direct manufacturing and cross-domain reuse of advanced functional materials locates on a higher position in the spent lithium-ion batteries (LIBs) waste management hierarchy, compared with the traditional metallurgies of spent LIBs involving the complex chemical extraction and purification. Energy conversion devices such as fuel cell (FC), share similar features with LIBs in terms of the electrode materials design principle, indicating an inherently close link between energy conversion and storage applications. Given that sustainability is the third dimension of the electrode in addition to structure and property, fabricating FC electrodes via simple modifications of spent LIBs materials would represent a paradigm-shifting concept of upcycling and break the boundary of different technologies. We report herein a case study of upcycling a typical LIBs cathode, LiFePO 4 particles embedded in N-doped carbon spheres (LFP/C), to a highly efficient single atomic (SA) electrocatalyst for oxygen reduction reaction (ORR). The top-down partial leaching method was used to convert LFP/C into metal leachates and residual carbon-based precipitates, the latter appeared as Fe SA-embedded hollow carbon spheres, with the minority of FeO x nanoclusters and FePO 4 nanoparticles. The FeO x /FePO 4 species display low direct contribution towards catalytic activity, but adjust the charge distribution of neighboring SA, thereby optimizing the intermediate adsorption energy at the rate-determining step occurring on SA sites, boosting the alkaline ORR activity as manifested by the high E onset of 0.97 V. Furthermore, the membrane electrode fabricated with the upcycled materials demonstrates great potentials in a practical energy conversion device, direct ammonia fuel cell. The etching strategy breaks a long-standing stereotype by innovatively constructing atomic catalytic sites via a top-down etching approach. More importantly, this work demonstrates the potential value of spent LIB electrodes in the half-cell reaction of FC, and builds a bridge between energy storage and conversion systems through the facile upcycling method. Figure 1

Recycling of Graphite Anode from Spent Lithium‐ion Batteries for Preparing Fe‐N‐doped Carbon ORR Catalyst

Gas-phase Oxidation Modification Strategy of Spent Graphite from Spent LiFePO4 with Enhanced Initial Coulombic Efficiency for Lithium-Ion Battery Anodes

Renewed graphite for high-performance lithium-ion batteries: catalytic graphitization approach

Upcycling end of lithium cobalt oxide batteries to electrocatalyst for oxygen reduction reaction in direct methanol fuel cell via sustainable approach

Upcycling the Spent Graphite Anode Into the Prelithiation Catalyst: A Separator Strategy Toward Anode‐Free Cell Prototyping

A lignin-derived N-doped carbon-supported iron-based nanocomposite as high-efficiency oxygen reduction reaction electrocatalyst

A comprehensive approach for the recycling of anode materials from spent lithium-ion batteries: Separation, lithium recovery, and graphite reutilization as environmental catalyst

Bridging Li-Ion Batteries and Fuel Cells: From Cathode Leaching Residue to Atomic-Scale Catalytic System

Simple Route for Graphite Recycling from Waste Lithium-Ion Batteries to Environmental Functional Materials

Waste Cigarette Butts-Derived Nitrogen-Doped Carbon Fibers Loaded with Ru Nanoparticles as an Efficient Cathode Catalyst for Lithium-Oxygen Batteries

Supporting critical raw material circularity – upcycling graphite from waste LIBs to Zn–air batteries

P‐Doped Ni/NiO Heterostructured Yolk‐Shell Nanospheres Encapsulated in Graphite for Enhanced Lithium Storage

Co-doped NiFe carbonate hydroxide hydrate nanosheets with edge effect constructed from spent lithium-ion battery ternary cathodes for oxygen evolution reaction

Recovery and Reuse of Anode Graphite from Spent Lithium-Ion Batteries via Citric Acid Leaching

3D Porous Fe/N/C Spherical Nanostructures As High-Performance Electrocatalysts for Oxygen Reduction in Both Alkaline and Acidic Media.

Interconnected Hierarchically Porous Fe, N-Codoped Carbon Nanofibers As Efficient Oxygen Reduction Catalysts for Zn-Air Batteries.

A High‐Performance Zinc–Air Battery Cathode Catalyst from Recycling of Spent Lithium Iron Phosphate Batteries

Introduced Iron-Based Catalysts for Low-Temperature Upcycling Regeneration of Spent Graphite towards Ultra-Fast Lithium Storage Properties

Highly dispersed Fe-Nx active sites on Graphitic-N dominated porous carbon for synergetic catalysis of oxygen reduction reaction

A feasible recycling route for spent graphite: Microwave-assisted puffing with Fe2O3 loading to construct high-performance anode for lithium-ion batteries

Rational design of Fe, N co-doped porous carbon derived from conjugated microporous polymer as an electrocatalytic platform for oxygen reduction reaction