Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Experiences With Using of Loading Tests and the “design Assisted by Testing” Method for the Determination and Verification of Structural Members and Details

Field Destructive Testing of a Reinforced Concrete Bridge Deck Slab

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

EXPERIMENTAL INVESTIGATION AND NONLINEAR FINITE ELEMENT ANALYSIS ON THE BEHAVIOR OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMN CONNECTIONS

Performance Assessment of a Renovated Precast Concrete Bridge Using Static and Dynamic Tests

Stiffness of steel‐to‐timber connection under cyclic loading

Experimental investigation of concrete-filled steel tubular columns with reinforcing lattice angle

The Relationship between Dynamic and Static Deformation Modulus of Unbound Pavement Materials Used for Their Quality Control Methodology

Influence of load arrangement on composite slab behaviour and recommendations for design

Prepared experimental study for durability verification of FRP reinforced concrete members

Diagnostics of Reinforcement Conditions in Concrete Structures by GPR, Impact-Echo Method and Metal Magnetic Memory Method

Determination of Road Bridge Load -Carrying Capacity

Assessment of the transportation route of oversize and excessive loads in relation to the load-bearing capacity of existing bridges

Nonlinear global design resistance: Case studies of post‐tensioned concrete bridges made of I‐73 and KA‐61 girders

Experimental Study and Numerical Assessment of the Flexural Behaviour of Square and Rectangular CFST Members under Monotonic and Cyclic Loading

Experimental investigation of punching shear behavior of flat slabs supported by rectangular columns and loaded with various load patterns

Monitoring structural responses during load testing of reinforced concrete bridges: a review

Towards a stability verification of two‐span members based on experimental and numerical investigations

DIAGNOSTIC AND PROOF LOAD TESTING FOR BRIDGE EVALUATION

Numerical and experimental studies of deflections of conventional and strengthened reinforced concrete bendable elements under short-term dynamic loading

Load distribution and passive confinement in reinforced concrete: Development of a mechanical model