Abstract:Abstract In the field of stochastic dynamics of marine structures, the determination of long-term extreme responses is a crucial aspect to ensure the desired level of structural reliability. The calculation of these responses requires precise knowledge of the environmental conditions and reliable methods to predict the values associated with a reliability target level. While there is a very precise method to determine the value of these extreme values, e. g. the full long-term analysis (FLTA), this approach is computationally expensive. Then, approximated methods are needed. One practical approach for the determination of the most relevant environmental conditions for extreme calculation is the environmental contour method (ECM). However, some limitations have been detected when this method is used for offshore structures that consider survival strategies e. g. offshore wind turbines (OWT). Lastly, a modified ECM procedure (MECM) has been developed with the purpose to bypass the limitations of the traditional ECM. This method is based on short-term simulations and through an iterative process by testing many environmental contours in the operational range allows finding an important wind speed with its corresponding return period and thus, the problem that traditional ECM has, is avoided. The environmental conditions, which are represented by a large number of parameters, are also an important aspect of extreme calculation. Whereas some of them are treated as stochastic values, some are considered deterministic and, therefore the existence of uncertainties in their measured/estimated values is inevitable. These uncertainties are addressed by adopting values recommended by standards and guidelines and, in practice, it is often necessary to be conservative when there is a lack of information about the specific site studied. Therefore, the understanding of the impact that these uncertainties can have on the loads/responses that govern the design of offshore structures, especially wind turbines, is of great relevance. In this work, the influence of uncertainty in the wind shear coefficient (WSC) is studied. This parameter is directly related to one critical environmental condition i. e. wind speed at hub height, and its influence in power production and fatigue loads has been documented in the literature, but, few cases have addressed their influence in bottom fixed OWT responses. This work seeks to highlight the relevance of an accurate selection of shear coefficient and, its influence on the probabilistic analysis of a bottom fixed OWT taking into account that considerable variations from recommended values may occur. Through the use of coupled simulations in FAST, the NREL 5MW wind turbine will be subjected to varying wind shear conditions, and the corresponding 50-yr long-term responses will be calculated considering the MECM to take into account the influence of the wind turbine survival mode. The extreme values are fitted from a Global Maxima Method (GMM). Finally, it is sought to relate the uncertainty in a relevant input parameter (i. e. WSC) with the uncertainties propagated to the output parameters (i. e. extrapolated long-term extreme responses).

A global assessment of extreme wind speeds for wind energy applications

Assessment of the Peak Response of a 5MW HAWT under Combined Wind and Seismic Induced Loads

A Review on Wind Speed Extreme Values Modeling and Estimation for Wind Power Plant Design and Construction

Comparison of Extreme Wind and Waves Using Different Statistical Methods in 40 Offshore Wind Energy Lease Areas Worldwide

Ensemble Bayesian Model Averaging Projections of Wind‐Speed Extremes for Wind Energy Applications Over China Under Climate Change

Statistical extrapolation methods and empirical formulae for estimating extreme loads on operating wind turbine towers

Global assessment of spatiotemporal changes of frequency of terrestrial wind speed

Wind Climate Parameters for Wind Turbine Fatigue Load Assessment

Uncertainty and Global Sensitivity Analysis of Wind Turbines Fatigue in Non-ideal Conditions

Validation of Wind Resource and Energy Production Simulations for Small Wind Turbines in the United States

Ultra-Short-Term Wind Power Forecasting in Complex Terrain: A Physics-Based Approach

EWSE and Uncertainty and Disturbance Estimator Based Pitch Angle Control for Wind Turbine Systems Operating in Above-Rated Wind Speed Region

Influence of Wind Shear Uncertainty in Long-Term Extreme Responses of an Offshore Monopile Wind Turbine

Site specific assessment of wind characteristics and determination of wind loads effects on wind turbine components and energy generation

Probability distributions for offshore wind speeds

An investigation of the impact of wind speed and turbulence on small wind turbine operation and fatigue loads

Spatial and temporal patterns of global onshore wind speed distribution

Using extreme value theory for the estimation of risk metrics for capacity adequacy assessment

Grey parameter estimation method for extreme value distribution of short-term wind speed data

Assessing the Reliability of Wind Power Operations under a Changing Climate with a Non-Gaussian Bias Correction

An Integrated Estimating Approach for Design Wind Speed under Extreme Wind Climate in the Yangtze River Inland Waterway