Abstract:Recently,with the growing problem of environmental pollution,a large number of emerging environmental purification technologies, especially the photocatalytic oxidation technique based on semiconducting metal oxide nanostructures,have been rapidly developed for the applications in degradation of organic pollutants from water and atmospheric environments. In the process of development,scientists around the world have recognized that the improvement in the visible light response, the separation efficiency of photogenerated charge carriers and the light stability of the catalysts are the key factors to promote the large- scale application of the photocatalytic oxidation technique. For this purpose,a series of new high-performance nanostructured composite photocatalysts have been continuously developed and investigated,but the process complexity and synthesis cost are gradually increasing. Also,it is difficult to realize the band structure regulation of the semiconductors and well-match energy levels between different semiconductors. These problems need to be solved urgently. At the same time,with the future demand for high selectivity of new technologies(such as selective sensing,selective gas separation,selective carbon dioxide reduction), the selective photocatalytic degradation of organic pollutants will also become a development direction in this field. In this study,a series of photocatalysts including pure ZnO,Mn-doped ZnO (Mn:ZnO),Mn2O3 coupled ZnO (ZnO/Mn2O3) and Mn2O3 coupled Mn- doped ZnO (Mn:ZnO/ Mn2O3)are successfully prepared by a modified polymer network gel method,and the characteristics of the catalysts for photocatalytic degradation of Rhodamine B (RhB) and Methylene Blue (MB) dyes under simulated sunlight irradiation are investigated. The phase compositions,microstructures,surface chemical states as well as optical and optoelectronic properties are analyzed through some material characterization approaches in detail. The results of X- Ray Diffraction(XRD),Scanning Electron Microscopy(SEM)and Brunauer-emmett-teller(BET) specific surface area shows that the particle sizes of Mn:ZnO and Mn: ZnO/Mn2O3 are decreased and the particle dispersibility are improved after trace (0.1 mol%)Mn doping and then coupling trace (0.2 mol%) Mn2O3,increasing BET specific surface area. Correspondingly,this results in the decrease of crystalline quality and the increase of crystal defects. Ultraviolet-visible(UV-vis) light absorption spectra indicates that the light absorption capacities of the composite photocatalysts in the visible region are significantly improved compared with pure ZnO and doped ZnO samples. Photoluminescence(PL)spectra suggests that trace Mn doping and trace Mn2O3 coupling jointly facilitate the separation of photogenerated electron- hole pairs. Combined with X-ray photoelectron spectroscopy (XPS),it is found that the enhanced visible light absorption capability and photogenerated electron-hole pair separation rate originates from the increase of oxygen vacancies on the catalyst surface and the formation of type II heterojunction structure between Mn:ZnO and Mn2O3. Therefore,Mn:ZnO/Mn2O3 exhibits the robust and superior photocatalytic activity for degradation of RhB dye under simulated sunlight irradiation. However,because of the narrow band gap(E-g similar to 1. 4 eV)of Mn2O3 and its higher valence band position than the redox potential of hydroxyl radical (center dot OH),the oxidation potential of photogenerated holes is too low to generate center dot OH with the stronger oxidizing power. This results in the lower RhB and MB dyes photodegradation efficiencies of the ZnO/Mn2O3 photocatalysts. In addition, Mn:ZnO/ Mn2O3 exhibits a selective photodegradation behavior towards RhB and MB dyes,that is,a significantly lower photodegradation efficiency for the easily degradable MB. Such a selective photocatalytic property is attributed to the difference between active species during the photocatalytic reactions and the relationship between the Zero Charge Point (ZPC) of the catalyst and the pH of the initial dye solution. In the photocatalytic processes,the strong oxidizing species(center dot O2-,center dot OH and h(+)) on the surfaces of the catalysts for the photodegradation of RhB dye are more than those(center dot OH and h(+)) for the photodegradation of MB dye. The ZPC value of Mn:ZnO/Mn2O3 closes to the pH value of the weakly acidic RhB (pH= 6.3 similar to 6.6) rather than MB(pH=6.0)dye aqueous solution,resulting in a higher adsorption ratio of cationic RhB dye molecules on the catalyst surface.

Synergistic effect of pH solution and photocorrosion of ZnO particles on the photocatalytic degradation of Rhodamine B

Effect of [Zn acetate]/[KOH] ratio on ZnO particles synthesis and photocatalytic Rhodamine B degradation

Synergetic Degradation Of Rhodamine B At A Porous Znwo4 Film Electrode By Combined Electro-Oxidation And Photocatalysis

Enhanced photocatalytic efficiency of porous ZnO coral-like nanoplates for organic dye degradation

Sonocatalytic degradation of acid red B and rhodamine B catalyzed by nano-sized ZnO powder under ultrasonic irradiation.

Synthesis, characterization of novel ZnO/CuO nanoparticles, and the applications in photocatalytic performance for rhodamine B dye degradation

Sonophotocatalytic degradation of rhodamine B dye using Zr doped ZnO nanoparticles: Kinetic study and toxicity assessment

Synthesis of CuO, ZnO nanoparticles, and CuO-ZnO nanocomposite for enhanced photocatalytic degradation of Rhodamine B: a comparative study

Study on Inorganic Oxidants Assisted Sonocatalytic Degradation of Acid Red B in Presence of Nano-Sized ZnO Powder

Exceptional photocatalytic performance of hexagonal ZnO nanorods for anionic and cationic dyes degradation

Synthesis of zinc oxide semiconductor nanoparticles using natural extract: a systematic evaluation of cationic dye photodegradation influenced by extract concentration, catalyst dose, and pH

Development of nanostructured based ZnO@WO3 photocatalyst and its photocatalytic and electrochemical properties: Degradation of Rhodamine B

Efficient rhodamine B dye photocatalytic degradation in aqueous media using novel ZnO nanomaterials co-doped with Ce and Dy

Phytogenic fabrication of ZnO and gold decorated ZnO nanoparticles for photocatalytic degradation of Rhodamine B

Sonophotocatalytic degradation mechanisms of Rhodamine B dye via radicals generation by micro- and nano-particles of ZnO

Ultra-fast photocatalytic degradation of Rhodamine B exploiting oleate-stabilized zinc oxide nanoparticles

Improved Photocatalytic Performance for Rhodamine B Degradation by Porous Zn2SnO4 Prepared with Carbon Black as a Pore-Forming Agent

Photocatalytic Degradation of Rhodamine B in Heterogeneous and Homogeneous Systems

Construction of ZnO/Keggin Polyoxometalate Nano-heterojunction Catalyst for Efficient Removal of Rhodamine B in Aqueous Solution

Highly Efficient Photodegradation of RhB–MO Mixture Dye Wastewater by Ag3PO4 Dodecahedrons under Acidic Condition

Preparation and Photocatalytic Properties of Highly Stable Mn:ZnO/Mn2O3 Nanocomposite Photocatalysts