Abstract:Purpose This research outlines the development and characterization of advanced composite materials and their potential applications in the aerospace industry for interior applications. Advanced composites, such as carbon-fiber-reinforced polymers and ceramic matrix composites, offer significant advantages over traditional metallic materials in terms of weight reduction, stiffness and strength. These materials have been used in various aerospace applications, including aircraft, engines and thermal protection systems. Design/methodology/approach The development of design of experiment–based hybrid aluminum composites using the stir-casting technique has further enhanced the performance and cost-effectiveness of these materials. The design of the experiment was followed to fabricate hybrid composites with nano cerium oxide (nCeO 2 ) and graphene nanoplatelets (GNPs) as reinforcements in the Al-6061 matrix. Findings The Al6061 + 3% nCeO2 + 3% GNPs exhibited a high hardness of 119.6 VHN. The ultimate tensile strength and yield strength are 113.666 MPa and 73.08 MPa, respectively. A uniform distribution of reinforcement particulates was achieved with 3 Wt.% of each reinforcement in the matrix material, which is analyzed using scanning electron microscopy. Fractography revealed that brittle and ductile fractures caused the failure of the fractured specimens in the tensile test. Practical implications The manufactured aluminum composite can be applied in a range of exterior and interior structural parts like wings, wing boxes, motors, gears, engines, antennas, floor beams, etc. The fan case material of the GEnx engine (currently using carbon-fiber reinforcement plastic) for the Boeing 7E7 can be another replacement with manufactured hybrid aluminum composite, which predicts weight savings per engine of close to 120 kg. Originality/value The development of hybrid reinforcements, where two or more types of reinforcements are used in combination, is also a novel approach to improving the properties of these composites. Advanced composite materials are known for their high strength-to-weight ratio. If the newly developed composite material demonstrates superior properties, it can potentially be used to replace traditional materials in aircraft manufacturing. By reducing the weight of aircraft structures, fuel efficiency can be improved, leading to reduced operating costs and environmental impact. This allows for a more customized solution for specific application requirements and can lead to further advancements in materials science and technology.

Mechanical properties study on sandwich hybrid metal/(carbon, glass) fiber reinforcement plastic composite sheet

Evaluation of the mechanical properties and deformability of metal-based composite sheets made of thin stainless-steel sheets and carbon fiber reinforced plastics

Experimental Investigation on Bending Properties of DP780 Dual-Phase Steel Strengthened by Hybrid Polymer Composite with Aramid and Carbon Fibers

Study on the Mechanical Properties of a Carbon-Fiber/Glass-Fiber Hybrid Foam Sandwich Structure

Development of epoxy-based sandwich composite panel with hollow glass microspheres/clay hybrid core and banana fiber facesheet for structural applications

Inverse Fiber Reinforced Polymer/Metal-Hybrid Laminates for Structural Lightweight Applications

Experimental and numerical study on the new technology of combining 7075‐W Al alloy with carbon fiber reinforced plastic composites

Experimental and numerical studies on bending characteristics of woven CFRP reinforced aluminum thin-walled automotive structures

Processing, Properties, and Uses of Lightweight Glass Fiber/Aluminum Hybrid Structures

Experimental and numerical study of thermoforming of Al/CFRP hybrid composites

Feasibility study of an integrated pre‐curing and forming process for 6061 Al alloy and carbon fiber hybrid composites

Hybrid fiber-reinforced composite with carbon, glass, basalt, and para-aramid fibers for light use applications

Improving the bending strength and energy absorption of corrugated sandwich composite structure

Research on joint strength and energy absorption of CFRP and Al sheets bonded-FDS hybrid joining

Experimental and Theoretical Study of Sandwich Panels with Steel Facesheets and Gfrp Core

Synthesis and characterization of DOE-based stir-cast hybrid aluminum composite reinforced with graphene nanoplatelets and cerium oxide

Mechanical Properties of Sandwiched Construction with Composite and Hybrid Core Structure

Flexural and sinking stiffnesses investigation of metal, glass fiber reinforced plastic and hybrid laminates through a semi‐experimental method

Flexural Performance of Steel–FRP Composites for Automotive Applications

Impact behavior of long glass fibre reinforced aluminum metal matrix composite prepared by friction stir processing technique for automotive

Development of an innovative composite sandwich matting with GFRP facesheets and wood core