An Experimental Investigation of the Influence of Loading Rate on Rock Tensile Strength and Split Fracture Surface Morphology

Zhen Cui,Sheng Qian,Guimin Zhang,Zhang Maochu

DOI: https://doi.org/10.1007/s00603-021-02368-4

IF: 6.518

2021-02-03

Rock Mechanics and Rock Engineering

Abstract:To investigate the effect of the loading rate on the tensile strength of rock material and the morphology of the resulting split fracture surfaces, three types of rock specimens, namely, granite, basalt and limestone, were collected and tested with Brazilian testing under different loading rates. The tensile strength was measured, and the effect of the loading rate on the tensile strength of the rock material was studied. Digital terrain map models of the split fracture surface were obtained with an optical 3D scanning technique, and the effects of the loading rate on the geometry and morphology of the fracture surface were studied. The influence of the loading rate and tensile strength on the roughness was studied quantitatively by calculating the roughness indices of a fracture surface for all three kinds of rock. The research results show that the rock tensile strength increases with the loading rate. A linear relationship was established in double-logarithmic coordinates to describe the relationship between the tensile strength and the loading rate. Four different roughness indices were used to describe the morphology of the split fracture surface. The analysis results show that the magnitudes of all the roughness indices increase with the loading rate. Additionally, the roughness indices for all three types of rock linearly increase with the tensile strength. This linear trend indicates that it is possible to utilize fracture surface roughness indices to estimate rock tensile strength. The current study may motivate further research on the relationship between the morphology indices of rock fractures and mechanical parameters of the rock.

geosciences, multidisciplinary,engineering, geological

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to study the influence of loading rate on the tensile strength of rocks and the morphology of splitting fracture surfaces. Specifically, the author tested the tensile strength of three different types of rocks (granite, basalt and limestone) under different loading rates through the Brazilian test, and obtained the digital topographic map model (DTM) of the splitting fracture surface by using optical 3D scanning technology to analyze the influence of loading rate on tensile strength and fracture surface roughness.

### Main problems:
1. **Influence of loading rate on tensile strength**: Study the change in tensile strength of rocks under different loading rates.
2. **Influence of loading rate on the morphology of splitting fracture surfaces**: Study the influence of loading rate on the geometric shape and surface roughness of the fracture surface after rock splitting.
3. **Relationship between tensile strength and fracture surface roughness**: Explore whether the tensile strength of rocks can be estimated through the fracture surface roughness index.

### Research methods:
- **Sample collection**: Rock samples of three types (granite, basalt and limestone) were collected from three major geotechnical engineering projects in China.
- **Experimental testing**: The self - developed RMT150C testing machine was used to conduct the Brazilian test, and five different loading rates (0.0005 mm/s, 0.002 mm/s, 0.005 mm/s, 0.01 mm/s, 0.02 mm/s) were set.
- **Data processing**: The DTM model of the splitting fracture surface was obtained through optical 3D scanning technology, and four roughness indices (actual area index \(A_t\), relative roughness coefficient \(R_s\), root - mean - square of the first - order derivative of the surface \(Z_{2s}\) and fractal dimension \(D\)) were calculated.

### Key findings:
- **Tensile strength increases with increasing loading rate**: In a double - logarithmic coordinate system, there is a linear relationship between tensile strength and loading rate. The fitting equations are respectively:
\[
\log_{10}(\sigma_t)=0.0233\log_{10}(v)+0.9166\quad(R^2 = 0.84)\quad\text{(granite)}
\]
\[
\log_{10}(\sigma_t)=0.0805\log_{10}(v)+0.9856\quad(R^2 = 0.81)\quad\text{(basalt)}
\]
\[
\log_{10}(\sigma_t)=0.2011\log_{10}(v)+0.8705\quad(R^2 = 0.95)\quad\text{(limestone)}
\]
where \(\sigma_t\) is the tensile strength of the rock and \(v\) is the axial loading rate in the Brazilian test.

- **Roughness indices increase with increasing loading rate**: All four roughness indices (\(A_t\), \(R_s\), \(Z_{2s}\) and \(D\)) increase with the increase of loading rate, and there is also a linear relationship between these indices and tensile strength.

### Conclusion:
This study shows that the loading rate not only affects the tensile strength of rocks, but also significantly changes the morphology and roughness of the splitting fracture surface. The research results provide new insights for further exploring the relationship between rock mechanical parameters and fracture surface morphology indices.