Abstract:NR/BR/SBR rubber composites with different CB/RR filler ratios and their mechanical and thermal properties before and after thermo‐oxidative and radiation aging. This work aims to find the optimal ratio of recycled rubber (RR) in carbon black (CB)/RR filler and determine its influence on the mechanical properties, thermal behavior, and activation energy of ternary rubber based on polyisoprene (natural rubber [NR]), polybutadiene (butadiene rubber [BR]), and styrene–butadiene rubber (SBR) with a constant ratio of 40/40/20 parts per 100 of rubber (phr). The filler used was N330 (60 phr) and a mixture of CB/RR filler in the following proportions: 55/5, 50/10, and 40/20 phr. The activation energy of the examined samples was determined by the rheometric method. The samples were subjected to thermo‐oxidative (at 100°C after 168 h) and γ‐radiation aging (200 kGy). Hardness, tensile strength, and elongation at break were evaluated before and after thermo‐oxidative and γ‐radiation aging. SEM, attenuated total reflectance fourier‐transform infrared (ATR‐FTIR), and TG/DTG techniques were used to characterize NR/BR/SBR composites. The results show that the most optimal CB/RR ratio is 55/5 phr, which is confirmed by the mechanical properties before and after aging and the results for the activation energies of cross‐linking and reversion. The thermal stability of the composite containing 60 phr of the CB and the composite reinforced with 5 phr of the RR in CB/RR filler is almost the same. The results of this research may be applicable in the automotive tire industry since NR/BR/SBR composites are used for automotive tire treads. Another benefit of this research is that the partial replacement of CB with RR contributes to the reduction of tire waste, and thus to the preservation of environmental protection. Highlights Rubber composite NR/BR/SBR = 40/40/20 phr reinforced with CB/RR filler The amount of RR in the CB/RR filler has been changed to 5, 10 and 20 phr The lowest value for Eac has the sample containing filler CB/RR = 55/5 phr The most thermally stable sample is the sample with 5 phr RR in CB/RR filler RR (5 phr) can be applied in CB/RR filler to reinforce NR/BR/SBR composites

Natural rubber-based solution adhesives: effect of carbon black on the adhesive properties

Effects of Carbon Black Surface Modification on the Morphology and Properties in Blends with Natural Rubber Studied with High‐Resolution X‐Ray Computed Tomography

Synergistic effects of silane‐modified carbon black and nano‐silica hybrid fillers on the performance of natural rubber compounds

Effect of carbon black and curing system on rubber–metal interface strength of automotive components

Enhanced abrasion resistance of NR/BR/TBIR composites through the synergistic reinforcement of carbon black and graphene oxide: Structural influence and mechanistic insights

Effect of compatibilisers on the cure characteristics and mechanical properties of ternary rubber blend composites

Natural rubber nanocomposites: effect of carbon black/multi-walled carbon nanotubes hybrid fillers on the mechanical properties and thermal conductivity

Nanoscale partitioning of carbon black in styrene butadiene rubber and butadiene rubber miscible blends and its effect on physico-mechanical properties

Influence of filler system on the cure characteristics and mechanical properties of butyl reclaimed rubber

Significant Influence of Bound Rubber Thickness on the Rubber Reinforcement Effect

Nature of Carbon Black Reinforcement of Rubber: Perspective on the Original Polymer Nanocomposite

Vulcanization kinetics and reinforcement behaviour of natural rubber-carbon black composites: Addition of Shea-butter versus aromatic oil as plasticizers

Composites based on carbon black reinforced NBR/EPDM rubber blends

Study on Boundary Layer and Surface Hardness of Carbon Black in Natural Rubber Using Atomic Force Microscopy

Effect of latex reclaim on physico-mechanical and thermal properties of carbon black filled natural rubber/butadiene rubber composite

The Effect of High Loaded Multiwall Carbon Nanotubes in Natural Rubber and Their Nonlinear Material Constants

The Effect of Apparent Density of Sulfidic Crosslink and Their Chemical Nature on Self-heat Build-up in Carbon Black Filled Natural Rubber under Cyclic Mechanical Loading

Use of recycled rubber in carbon black as a filler in ternary blends of NR/BR/SBR for the automotive tire industry

The degree of filler dispersion, rheometric and mechanical properties of carbon black-filled styrene-butadiene rubber composites in the presence of alkanolamide

Effect of thermally exfoliated graphite on the performance characteristics of epoxidized natural rubber compatibilized natural rubber/polybutadiene tyre tread formulations

Influence of Graphene Oxide and Multiwalled Carbon Nanotubes on the Dynamic Mechanical Properties and Heat Buildup of Natural Rubber/carbon Black Composites