Abstract:Alkaline water electrolysis has been operated on 100+ MW scale in the 20 th century powered by hydropower. Because of this history, the technology is often regarded as a mature technology with limited improvement potential that is less suitable for flexible operation. As a result most research efforts in the field of water electrolysis focus on other technologies such as PEM, solid oxide and AEM electrolysis. This is a pity, since alkaline electrolysis is very well positioned to be deployed on large-scale for the production of green hydrogen in the coming decades. Main reason is that in contrast to the other technologies, alkaline technology does not depend on scarce and/or expensive noble or rare earth metals. Also, the use of a diaphragm instead of a membrane makes the technology more robust. Yet, to enable the large-scale deployment of alkaline electrolysis for production of green hydrogen from renewable electricity certain technical challenges need to be overcome. These include safety challenges associated with rare scenarios where hydrogen and oxygen can mix, flexibility limitations associated with gas crossover limiting the minimum load of the plant, and durability challenges resulting from frequent shutdowns of electrolyzers. In principle all these challenges can be overcome by rigorous plant design and the selection of suitable diaphragm and electrode materials, but they do require research efforts. Next to that, there is room to significantly drive down the costs of green hydrogen produced by alkaline electrolyzers. Traditionally, alkaline electrolyzers have been operated at low current densities of 0.2-0.4 A cm -2 . This was related to the high ohmic drop associated with the use of thick diaphragms and non-zero-gap cell designs. Presently, advanced alkaline electrolyzers are under development that can operate at significantly higher current densities (~1 A cm -2 ) through the use of thinner diaphragms, zero-gap cell designs and improved electrode materials. Operation at these increased current densities increases the output of alkaline electrolyzers and in this way can effectively reduce the costs and footprint of water electrolysis plants. Yet, the use of thinner diaphragms and advanced electrodes also creates new challenges, since they can lead to increased gas crossover and vulnerability to impurities and reverse currents that occur upon the shutdown of electrolyzers. In this presentation the fundamentals of alkaline water electrolysis will be discussed. These include overpotentials and durability of electrode coatings, the role of electrolyte impurities, ohmic resistance, gas crossover through the diaphragm, the influence of operating temperature and pressure, the effect of bubbles, and the influence stray currents resulting from the manifold design. These fundamentals will be translated into a potential design for the perfect alkaline electrolyzer. Figure:alkaline electrolyzers operational in Norway in 1931. Source: Norsk Industriarbeidermuseum Figure 1

Comparison of thyristor and insulated-gate bipolar transistor -based power supply topologies in industrial water electrolysis applications

Power electronics for green hydrogen generation with focus on methods, topologies, and comparative analysis

Effect of power quality on the design of proton exchange membrane water electrolysis systems

Experimental study of alkaline water electrolyzer performance and frequency behavior under high frequency dynamic operation

A Comprehensive Review on the Power Supply System of Hydrogen Production Electrolyzers for Future Integrated Energy Systems

A Novel High Power Hybrid Rectifier With Low Cost and High Grid Current Quality for Improved Efficiency of Electrolytic Hydrogen Production

Research on Hybrid Rectifier for High Power Electrolytic Hydrogen Production Based on Modular Multilevel Converter

Research on DC Power Supply for Electrolytic Water to Hydrogen Based on Renewable Energy

Power Converter Topologies for Electrolyzer Applications to Enable Electric Grid Services

Overview of Main Electrolyzer Technologies and Power Electronic Converter Topologies for Enabling Hydrogen Production Through Water Electrolysis

Micro/small wind turbine power control for electrolysis applications

A Novel DC–DC Converter for Electrolyzer With Low Ripple and High Step Down

Comparisons of different control strategies for 20kVA solid state transformer

(Invited) Challenges and Opportunities of Alkaline Water Electrolysis

Automatic operation of decoupled water electrolysis based on bipolar electrode

Control of isolated hydrogen generation power supply for the DC power grid

An Overview of Different Water Electrolyzer Types for Hydrogen Production

Control of a Three-Phase Current Source Rectifier for H2 Storage Applications in AC Microgrids

Comparison between hydrogen production by alkaline water electrolysis and hydrogen production by PEM electrolysis

A Review of Hydrogen Production Methods and Power Electronics Converter Topologies for Green Hydrogen Applications

Zero-Gap Bipolar Membrane Water Electrolyzers: Principles, Challenges and Practical Insights