Abstract:Purpose The purpose of this paper is to demonstrate a multipurpose inspection robot that can both walk on the ground and climb on poles. The structure design, size optimization, kinematics analysis, experiment and arithmetic of the robot are discussed in the paper. Design/methodology/approach The robot consists of three adjustable modules and a two-degree-of-freedom parallel mechanism in tandem, and the wheel-finger mechanism of each module can realize wheel-finger opening and closing for fast movement and obstacle crossing. This paper uses geometric analysis and simulation analysis to derive size optimization, and vector coordinate method to derive kinematics. Finally, the experiment is carried out by simulating the working environment of the robot. Findings The robot can realize ground walking and ground turning through the robot entity prototype experiment on the built working environment and efficiently realize 0°–90° pole climbing by the assemble design, optimization and machining. In addition, the robot can also smoothly complete the state transition process from 0° ground to 90° pole climbing. Furthermore, the robot shows good environmental self-adaptation and can complete daily inspection work. Originality/value The robot can pitch and yaw at a large angle and has six-legged characteristics. It is a multipurpose inspection robot that can walk on the ground and climb on poles. And through structure design, size optimization, kinematics analysis and simulation, the existing robots’ common shortcomings such as poor barrier-crossing ability and poor environmental adaptability are solved.

Design and Kinematic Analysis of a Wall-climbing Robot for Bridge appearance Inspection

Design and Performance Analysis of a Tracked Wall-Climbing Robot for Ship Inspection in Shipbuilding

Efficient Motion Planning Based on Kinodynamic Model for Quadruped Robots Following Persons in Confined Spaces

Mechanism design and workspace analysis of a hexapod robot

Development and Experimental Study of Multi-Motion Model Robot with Wheel-Track Compound Structure

Kinematic analysis and foot end trajectory planning of quadruped wall-climbing robot based on parallel leg structure

Structure design and optimization of ground moving and pole climbing inspection robot

Design Of A Mammal-Kike Hexapod Walking Robot

Inspection Robot Design for Underwater Structure in Complex Flow Environment

Design and Technical Development of Wall-Climbing Robots: A Review

A Modular Biped Wall-Climbing Robot With High Mobility and Manipulating Function

A Path Tracking Method of a Wall-Climbing Robot towards Autonomous Inspection of Steel Box Girder

Optimization Design and Trajectory Error Compensation of a Facade-Adaptive Wall-Climbing Robot

Multi-body dynamics model of crawler wall-climbing robot

Design and analysis of a wall‐climbing robot for water wall inspection of thermal power plants

Design and analysis of four-legged wall-climbing robot

A Biomimetic Wheel-Track Wall-Climbing Robot Based on Rolling Adsorption Mechanism

Design and Analysis of a Metamorphic Hexapod Robot for Inspecting Curved Cavities Inside the Aircraft

Design and research of a highly adaptive autonomous wall-climbing robot

Feasibility, planning and control of ground-wall transition for a suctorial hexapod robot

Development of a wheeled wall‐climbing robot with an internal corner wall adaptive magnetic adhesion mechanism