Abstract:Magnesium is a competitive candidate material for engineering lightweight structures and biomedical degradable scaffolds. However, it often suffers unpredictably sudden failure in atmospheric and physiological environments. The prevailing viewpoints have indicated that the failure is closely related to hydrogen. So far, the relevant hydrogen-induced damage mechanisms are still of significant controversy. Building an Mg-H atomic system and conducting molecular dynamics (MD) simulations, this study quantitatively investigates the possibility of hydrogen segregation at grain boundaries (GBs) and reveals the trend of critical energy release rate (CERR) for fracture at the matrix and GBs with increasing hydrogen concentration of single-crystal and polycrystalline systems. The results show that hydrogen tends to segregate at GBs due to GB energy providing more trapping sites. The CERRs for cracking both at the matrix crystal planes and GBs significantly decrease with increasing hydrogen concentration owing to metallic bond weakening, and GBs become more brittle than crystal planes. In the systems without hydrogen, there is a higher tensile strain at fracture, the growth of the free surface is usually accompanied by dislocation emission, and the cracks can even propagate along the migrated GBs with a higher misorientation angle, resulting in an uneven fracture surface with void coalescence features. The tensile stress-strain curves of the systems with high hydrogen concentration exhibit a significant low-stress rapid unloading characteristic. As the hydrogen concentration increases, the dislocation density decreases significantly and the free surface rapidly grows along the hydrogen-distributed crystal planes or GBs, resulting in a smooth fracture surface with cleavage features.

Quantitative Monitoring of the Environmental Hydrogen Embrittlement of Al-Zn-Mg-Based Aluminum Alloys via Dynamic Hydrogen Detection and Digital Image Correlation

Assessment of hydrogen embrittlement behavior in Al-Zn-Mg alloy through multi-modal 3D image-based simulation

Surrogate Model-Based Assessment of Particle Damage Behaviour of Al-Zn-Mg Alloy

Hydrogen embrittlement revealed via novel in situ fracture experiments using notched micro-cantilever specimens

In-situ 3D Observation of Hydrogen-Assisted Particle Damage Behavior in 7075 Al Alloy by Synchrotron X-ray Tomography

Analysis of Hydrogen-Assisted Brittle Fracture Using Phase-Field Damage Modelling Considering Hydrogen Enhanced Decohesion Mechanism

Hydrogen Embrittlement Prompt Fracture in Ni-based Single Crystal Superalloy

Quantum Mechanical Modeling of Hydrogen Assisted Cracking in Aluminum

Molecular Dynamics Study of the Microscopic Mechanism of Hydrogen Embrittlement Damage in FeCr Alloys

A Study of Intergranular Fracture in an Aluminium Alloy Due to Hydrogen Embrittlement

Hydrogen trapping and embrittlement in high-strength Al-alloys

AlMgZnCu Hydrogen Embrittlement by Nanograin Boundary Decomposition

Quantitative tests revealing hydrogen-enhanced dislocation motion in α-iron

Hydrogen trapping and embrittlement in high-strength Al alloys

Atomistic modeling of hydrogen embrittlement at grain boundaries of Mg

Hydrogen-accelerated spontaneous microcracking in high-strength aluminium alloys

Revisiting stress-corrosion cracking and hydrogen embrittlement in 7xxx-Al alloys at the near-atomic-scale

Observation of Hydrogen Trapping at Dislocations, Grain Boundaries, and Precipitates

Review of the Quantitative and Rapid Measurement Technology of Hydrogen in Aluminum and Magnesium Alloy Melt

Switching Nanoprecipitates to Resist Hydrogen Embrittlement in High-Strength Aluminum Alloys

Hydrogen Embrittlement Detection Technology Using Nondestructive Testing for Realizing a Hydrogen Society