Monitoring of the Operational Conditions in Steel Pipes Using Fiber Optic Sensors

DOI: https://doi.org/10.21741/9781644901311-17

2021-02-20

Abstract:Abstract. Oil and water transport pipeline systems are susceptible to damage due to harsh environmental conditions and operational factors, hence ongoing maintenance and inspection are required. The development of a continuous and reliable monitoring technique will ensure the safety usage of these structures and assist in the extension of their life span. In this study, the monitoring and assessment of pipelines are performed using a network of Fiber Bragg Grating (FBG) sensors mounted along the longitudinal and circumferential directions. The sensitivity of the measurements to assess pressure and flow variation in the pipe, in addition to leakage detection and localization were evaluated. Water at a controlled pressure and flowrate was pumped into the designed six-meter pipe testbed designed for this purpose. Leakage was simulated by opening one of the four designated valves installed on the pipe. The variation in the pressure inside the pipe highly impacted the amplitude of the measured strain increasing it significantly reaching 20%. An increase in flowrate had an inverse effect, it resulted in a 5% decrease in the amplitude of the measured strain drop. The change of hole leakage size greatly influenced the measured signal, resulting in a 55% change in amplitude between a 2 cm2 and a 5 cm2 hole leakage. For the location of leakage, only the temporal aspects of the signal were affected resulting in a slight shift in the response time of sensors relative to each other. The results were promising to monitor the structural conditions related to leakage detection and localization, based on the patterns observed.