Abstract:Carbon fiber-reinforced polymers (CFRPs) are widely used in the fabrication of solid rocket motor casings due to their exceptional performance. However, the bonding interface between CFRP and viscoelastic materials (rubber) is prone to debonding damage during service and storage under complex environmental conditions, which poses a significant threat to the structural integrity and reliability of the engine. Existing nondestructive testing (NDT) methods, such as X-ray imaging, infrared thermography, and ultrasonic testing, although somewhat effective, exhibit significant limitations in detecting interfacial defects in deep or multilayered composite materials, particularly under the challenging conditions of service and storage. This study proposes an innovative method based on active Lamb wave energy analysis and introduces the Damage Evolution Factor (DEF), specifically designed to detect and evaluate interfacial debonding defects in CFRP–rubber bonded structures within solid rocket motors during service and storage. Through numerical simulations and experimental validation, we selected the A0 mode Lamb wave, which is more sensitive to interfacial damage, as the incident wave and excited it on the surface of the structure. Displacement time-history response signals at observation points under different damage models were extracted and analyzed, and DEF values were calculated. The results show that DEF values increase with the size of the interfacial debonding damage. Similar trends were observed in experimental studies, further validating the effectiveness of this method and demonstrating that DEF can be used for the quantitative evaluation of interfacial debonding defects in CFRP–rubber bilayer bonded structures.

A novel damping based feature for rich resin defect detection in a four layer composite plate using S0 Lamb mode

An Algorithm Based on Logarithm of Wavenumber Amplitude for Detection of Delamination in Carbon Fiber Composite

A Quantitative Damage Identification Method for Cf/Ep Composite Laminates Based on Lamb Waves

Ultrasonic detection and characterization of delamination and rich resin in thick composites with waviness

Vibration-Based In-Situ Detection and Quantification of Delamination in Composite Plates

Ultrasound Defect Detection in Thick Composites with Out-of-plane Waviness

Multiple Damage Assessment in Composite Laminates Using A Doppler-Effect-Based Fiber-Optic Sensor

Damage Localization and Identification in WGF/epoxy Composite Laminates by Using Lamb Waves: Experiment and Simulation

Damage assessment in composite laminates with the Lamb wave factorization method

Delamination inspection in composite laminates with S0 Lamb wave using flexible macro-fiber composite transducers

A Modal Decomposition Imaging Algorithm for Ultrasonic Detection of Delamination Defects in Carbon Fiber Composite Plates Using Air-Coupled Lamb Waves

Lamb Wave-Based Damage Detection of Composite Shells Using High-Speed Fiber-Optic Sensing

Damage Detection Of Composite Laminates Based On Vibration Testing

Damage Identification in Various Types of Composite Plates Using Guided Waves Excited by a Piezoelectric Transducer and Measured by a Laser Vibrometer

Damage evaluation of laminated composite material using a new acoustic emission Lamb-based and finite element techniques

Lamb wave-based quantitative identification of delamination in CF/EP composite structures using artificial neural algorithm

Lamb Wave Inspection for Composite Laminates Using a Combined Method of Sparse Reconstruction and Delay-and-sum

Detection of Debonding Defects in Carbon Fiber-Reinforced Polymer (CFRP)–Rubber Bonded Structures Based on Active Lamb Wave Energy Analysis

Damage Localization in Composite Laminates by Building in PZT Wafer Transducers: A Comparative Study with Surface‐Bonded PZT Strategy

A Novel Superposed Waveform Method for Damage Detection of Composite Laminates

Damage Detection in Composite Structures with High-Damping Materials Using Time Reversal Method