Abstract:Low-altitude unmanned aerial vehicle (UAV) photogrammetry combined with structure-from-motion (SFM) algorithms is the latest technological approach to imaging 3D stereo constructions. At present, derivative products have been widely used in landslide monitoring, landscape evolution, glacier movement, volume measurement, and landscape change detection. However, there is still a lack of research into the accuracy of 3D data positioning based on the structure-from-motion of unmanned aerial vehicle (UAV-SFM) technology, itself, which can affect the measurable effectiveness of the results in further applications of this technological approach. In this paper, validation work was carried out for the DJI Phantom 4 RTK UAV, for earth observation data related to 3D positioning accuracy. First, a test plot with a relatively stable surface was selected for repeated flight imaging observations. Specifically, three repeated flights were performed on the test plot to obtain three sorties of images; the structure from motion and multi-view stereo (SFM-MVS) key technology was used to process and construct a 3D scene model, and based on this model the digital surface model (DSM) and digital orthophoto map (DOM) data of the same plot with repeated observations were obtained. In order to check the level of 3D measurement accuracy of the UAV technology itself, a window selection-based method was used to sample the point cloud set data from the three-sortie repeat observation 3D model. The DSM and DOM data obtained from three repeated flights over the surface invariant test plots were used to calculate the repeat observation 3D point errors, taking into account the general methodology of redundant observation error analysis for topographic surveys. At the same time, to further analyze the limits of the UAV measurement technique, possible under equivalent observation conditions with the same processing environment, a difference model (DOD) was constructed for the DSM data from three sorties, to deepen the overall characterization of the differences between the DSMs obtained from repeated observations. The results of the experimental study concluded that both the analysis of the 3D point set measurements based on window sampling and the accuracy evaluation using the difference model were generally able to achieve a centimeter level of planimetric accuracy and vertical accuracy. In addition, the accuracy of the surface-stabilized hardened ground was better, overall, than the accuracy of the non-hardened ground. The results of this paper not only probe the measurement limits of this type of UAV, but also provide a quantitative reference for the accurate control and setting of an acquisition scheme of the UAV-based SfM-MVS method for geomorphological data acquisition and 3D reconstruction.

Researching the accuracy of determining spatial coordinates through processing images from drones

Accuracy assessment of direct georeferencing UAV images with onboard global navigation satellite system and comparison of CORS/RTK surveying methods

Accuracy assessment of real-time kinematics (RTK) measurements on unmanned aerial vehicles (UAV) for direct geo-referencing

Performance and precision analysis of 3D surface modeling through UAVs: validation and comparison of different photogrammetric data processing software.

Photogrammetry Using UAV-Mounted GNSS RTK: Georeferencing Strategies without GCPs

Accuracy analysis of UAV photogrammetry using RGB and multispectral sensors

Experimental Study on 3D Measurement Accuracy Detection of Low Altitude UAV for Repeated Observation of an Invariant Surface

Assessment of Accuracy in Unmanned Aerial Vehicle (UAV) Pose Estimation with the REAL-Time Kinematic (RTK) Method on the Example of DJI Matrice 300 RTK

PPK PROCESSING TO BOOST UAS ACCURACY IN CADASTRAL MAPPING

Accuracy Assessment of UAV Photogrammetry System with RTK Measurements for Direct Georeferencing

A Visual Compass Based on Point and Line Features for UAV High-Altitude Orientation Estimation

Airborne sensor fusion: Expected accuracy and behavior of a concurrent adjustment

ACCURACY EVELUATION OF ORTHOPHOTO MAPS OBTAINED BY UAV SYSTEMS

Measurement Accuracy and Improvement of Thematic Information from Unmanned Aerial System Sensor Products in Cultural Heritage Applications

GNSS/INS-Assisted Structure from Motion Strategies for UAV-Based Imagery over Mechanized Agricultural Fields

Improving UAV‐SfM photogrammetry for modelling high‐relief terrain: Image collection strategies and ground control quantity

ACCURACY ANALYSIS OF UAV COORDINATES USING EGNOS AND SDCM AUGMENTATION SYSTEMS

Accuracy analysis of UAV aerial photogrammetry based on RTK mode, flight altitude, and number of GCPs

Coastal Mapping Using DJI Phantom 4 RTK in Post-Processing Kinematic Mode

Enhancing UAV-SfM Photogrammetry for Terrain Modeling from the Perspective of Spatial Structure of Errors

The use of budget UAV systems and GIS spatial analysis in cadastral and construction surveying for building planning