Abstract:<p>The paper presents the numerical investigations for a light civil helicopter fuselage with the purpose of reducing the helicopter drag. Two numerical methods: Reynolds-Averaged Navier-Stokes (RANS) and a hybrid RANS-LES method: improved delayed detached-eddy simulation (IDDES) method are performed for the simulation of a prototype helicopter fuselage. The RANS method is validated by a modular helicopter fuselage with experimental data, while the IDDES method has already been used in other studies and good results have been achieved. The numerical results of the civil helicopter in terms of the aerodynamic coefficients obtained by the two methods are consistent with each other. Compared to the RANS method, the IDDES approach is capable of predicting the large separation flow of the fuselage/components and the small-scale vortices in the flow field. It is found that the hybrid method captures the periodically detached separating vortices behind the skid struts, while the flow at the same position simulated by the RANS method is still attached. Moreover, separating vortices, which develop diagonally upwards, are captured at fuselage/tail-boom junction by the hybrid method, whereas RANS simulation doesn't predict. Subsequently, the design of the helicopter drag reduction is carried out at <span class="math"><math>α=0</math></span> deg angle of attack and 0.2 Mach number through shape optimization based on the numerical simulations, and the numerical results are verified by the force tests. It shows that the optimization of the landing skids aims at reducing the strong Karman vortex shedding effect induced by the skids, which greatly decreases the total drag. Combined with the optimization of the fuselage/tail-boom transition, this approach suppresses the separation flow of the fuselage and reduces the pressure drag, and the adjustment of transition slope benefits of up to 1.18% drag reduction, while the extension of transition reduces the drag by 2.64%. The optimization of tail-boom layout demonstrates that lower tail-boom layout can contribute to a drag reduction by 4.37% (RANS) and 3.89% (test), respectively, when compared to the original tail-boom layout.</p>

Simulation Analysis for Effect of Rear Structure of Hatchback Car on Rear Field Characteristics

Multiobjective Shape Optimization of A Hypersonic Lifting Body Using A Correlation-Based Transition Model

Study of the automotive aerodynamic performance affected by entrance structure of forecabin

Aerothermodynamic Shape Optimization of a Hypersonic Lifting Body

CFD Analysis on Effect of Front Windshield Angle on Aerodynamic Drag

On the aerodynamic effects of the optimised DrivAer fastback model car under adverse situations

Extended Study of Full-Scale Wind Tunnel Test and Simulation Analysis Based on DrivAer Model

Optimization of aerodynamic drag reduction for vehicles with non-smooth surfaces and research on aerodynamic characteristics under crosswind

Numerical Simulation for the Exterior Flow Field Around a Round-roof Van and Optimization Design of its Aerodynamic Attachment

Introduction of a New Car Model Series for Aerodynamics Research

Simulation The Effect of Spoiler on Aerodynamic for Sedan Car

Numerical investigation on the effect of rear wing on aerodynamic performance of race car

The Influence Upon the Outflow Field of the Fast Back Cars of the Shape of the Roof Rack

Review of effects the rear spoiler aerodynamic analysis on ground vehicle performance

The Influence of Forebody Topology on Aerodynamic Drag and Aeroacoustics Characteristics of Squareback Vehicles using CAA

On the Drag Reduction Optimization of the DrivAer Fastback Model Car with Digital Side Mirror

Numerical Simulation of Hatchback Car with Modified Vehicle Design for the Improvement of Fuel Consumption

To study the Aerodynamic Effects of Spoiler of a Car (Sedan – Segment) using Computational Fluid Dynamics

Comparison and Analysis on the Impact of Two Typical Rearview Mirrors on Aerodynamic Performance

Numerical investigations on drag reduction of a civil light helicopter fuselage

Comprehensive Research on Vibration Characteristics, Strength and Stability of T-tail