Abstract:The objective of this paper is to develop and evaluate a new integrated multigenerational system comprised of cryogenic air separation, hydrate-based desalination, combined cycle and oxyfuel power plants, carbon dioxide amine absorption, and transcritical carbon dioxide power cycle, employing liquefied natural gas cold energy. This integrated multi-generation system, applicable for liquefied natural gas importer terminals with access to seawater, produces approximately 2,533 MW net output power and 1,985 kg/h fresh water. In addition, this integrated multi-generation process produces 16,735,861 kg/h high-purity liquid oxygen (100 mol%), 4,773,633 kg/h liquid nitrogen with 99.71 mol% purity, more than 31,724,465 kg/h high-purity gaseous nitrogen (99.9 mol%), and 90,903,230 kg/h low-purity gaseous nitrogen (83.38 mol%). About 5907.3 MW of produced power is generated by liquefied natural gas expander. The performance of this system is evaluated by energetic methods. The results of energy analysis show the specific energy consumptions of the air separation products are 0.551 kW/kg and 1.93 kW/kg for liquid oxygen and nitrogen, respectively. Moreover, in the hydrate-based desalination subsystem, the specific energy consumption is 0.5 kW/m 3 for produced pure water. The combined cycle power plant includes two gas turbines, three steam turbines, and a three-pressure level heat recovery steam generation. The thermal efficiencies of gas turbine cycles (Bryton), steam turbine cycles (Rankine) and combined power cycles are 26.3 %, 29.6 %, and 36.2 %, respectively. The flue gases from power plants enter the carbon dioxide amine absorption subsystem. The separated carbon dioxide is used as a working fluid to produce 372.1 MW power in transcritical carbon dioxide cycle. The results of energy analysis for carbon dioxide amine absorption subsystem show that the specific energy consumption, the ratio of captured carbon dioxide per unit mass of liquefied natural gas and the carbon dioxide removal efficiency are 6.60 kW/kg, 33.91 kg/tone, and 90.06 %, respectively. Approximately 2,905,000 kg/h of liquid carbon dioxide is obtained as the byproduct of this multi-generation process. Additionally, sensitivity analysis is conducted to determine key parameters influencing the main energetic indexes. Finally, the amount of attainable regasified natural gas reaches 257,523 tone/h by applying this multi-generation system with total 86 % energy efficiency.

Integrated thermochemical Mg‐Cl‐Na hydrogen production cycle, carbon dioxide capture, ammonia production, and methanation

Hydrogen Production Via Ammonia from Methane Integrated with Enhanced Oil Recovery: A Techno-Economic Analysis

A new system for hydrogen and methane production with post-combustion amine-based carbon capturing option for better sustainability

Development and multi-objective optimization of a newly proposed industrial heat recovery based cascaded hydrogen and ammonia synthesis system

Solar energy exploitation and storage in a novel hybrid thermo-electrochemical process with net-zero carbon emissions

Investigation of a novel multigeneration system driven by an ammonia-methane Brayton cycle with partial production and utilization of ammonia, methane, and hydrogen: Energy and carbon footprint assessments

Process Design and Thermoeconomic Evaluation of a CO2 Liquefaction Process Driven by Waste Exhaust Heat Recovery for an Industrial CO2 Capture and Utilization Plant

Numerical simulation and 4E analysis of a steam methane reforming-based multi heat recovery process, producing electricity, methanol, fresh water, heating, and coolant

United Conversion Process Coupling Co2 Mineralization With Thermochemical Hydrogen Production

A novel integrated system for sustainable generation of hydrogen and liquid hydrocarbon fuels using the five-step ZnSI thermochemical cycle, biogas upgrading process, and solar collectors

A New Integrated System for Carbon Capture and Clean Hydrogen Production for Sustainable Societal Utilization

Energy analysis and economic evaluation of a new developed integrated process configuration to produce power, hydrogen, and heat

Life cycle analysis of ammonia and methane production using green hydrogen and carbon dioxide

Process modeling and analysis of a novel system achieving near-complete utilization of captured CO 2 from chemical looping hydrogen generation

A novel integrated hydrogen and natural gas liquefaction process using two multistage mixed refrigerant refrigeration systems

Development of an Integrated Structure for the Tri-Generation of Power, Liquid Carbon Dioxide, and Medium Pressure Steam Using a Molten Carbonate Fuel Cell, a Dual Pressure Linde-Hampson Liquefaction Plant, and a Heat Recovery Steam Generator

Using Machine Learning for Comparative Optimizing a Novel Integration of Molten Carbonate and Solid Oxide Fuel Cells with CO2 Recovering and Gasification

A novel sustainable biomass-fueled cogeneration cycle integrated with carbon dioxide capture utilizing LNG regasification and green hydrogen production via PEM electrolysis: Thermodynamic assessment

Introducing and performance evaluation of a novel Multi-Generation process for producing Power, fresh Water, oxygen and nitrogen integrated with liquefied natural gas regasification and carbon dioxide removal process

A sustainable syngas cryogenic separation process combined with ammonia absorption refrigeration pre-cooling cycle

Development and multi-aspect investigation of an innovative process driven by geothermal energy, involving LNG-based steam reforming and syngas-fueled gas turbine for production of power, heat, and methanol