Abstract:This study explores the application of the half-bridge Inductor-Inductor-Capacitor (LLC) resonant converter in Light Emitting Diode (LED) lighting driver power supplies, with a specific focus on improving efficiency and dimming capabilities. The investigation begins with an analysis of the sliding mode control (SMC) method, utilizing a constant-current design with a fixed switching frequency (FWF). A novel fuzzy frequency-selective SMC dimming strategy is proposed to recognize the challenge of significant output voltage ripple during dimming under a FSF. To address the ripple issue during dimming, an electromagnetic filtering circuit is designed, and a zero-voltage turn-on Metal—Oxide—Semiconductor (MOS) tube is introduced, incorporating a synchronous rectification scheme to mitigate losses in the secondary-side rectification diode. The study comprehensively considers a current-mode self-driven method, specifically tailored to the LLC circuit’s different operating modes. The LLC resonant circuit, along with the subsequent synchronous rectification circuit, is meticulously designed for a 252 W LED driver power supply prototype. A closed-loop simulation circuit model is developed using PSIM software in experimental validation. The feasibility of SMC based on a FSF is affirmed through a comparative analysis of SMC signal waveforms, steady-state output current (OC) models, and resonant tank current waveforms. The investigation into the OC under various SMC conditions demonstrates the half-bridge LLC resonant converter’s ability to achieve stable output with minimal ripple. The designed LED lighting circuit is applied to indoor design, providing adjustable LED brightness and switch status at different power levels. Although obstacles slightly impact the communication quality of the circuit, it remains suitable for the majority of users’ needs.

Discrete-Time Modeling of High Power Asymmetric Half-Bridge LED Constant-Current Driver Controlled by Digital Current Mode

A Digital Controller Based on Primary Side Regulation with Improved Accuracy for LED Application

A Constant Current LED Driver Based on Flyback Structure with Novel Primary Side Control

Digital Predictive Current-Mode Control for Asymmetrical Half-Bridge LED Constant-Current Driver

A linear constant current LED driver without off-chip inductor and capacitor

Analysis and Design Considerations for A High Power Buck Derived Led Driver with Extended Output Voltage and Low Total Harmonic Distortion

Asymmetric Pwm Controlled Llcc Resonant Half Bridge Dual Outputs Led Driver

Modeling, Analysis and Design of 15kw Zero-Voltage Zero-Current Switched Full Bridge PWM Converter

A High-Performance PWM Controller with Adjustable Current Limit

Modeling and Analysis of a Dual-Active-Bridge-Isolated Bidirectional DC/DC Converter to Minimize RMS Current With Whole Operating Range

Modeling and Decoupled Control of a Buck–Boost and Stacked Dual Half-Bridge Integrated Bidirectional DC–DC Converter

Large- and Small-Signal Average-Value Modeling of Dual-Active-Bridge DC–DC Converter With Triple-Phase-Shift Control

A Constant Current Digital Control Method for Primary-Side Regulation Half-Bridge LLC Resonant Converter

Modeling Method for the Real-Time Simulation of Bridge-Based High-Switching-Frequency Power Electronic Converters

Modeling, Analysis, and Development of a Current Decoupling Control High-Precision Converter Under Nonideal Conditions

Average Modeling of a Dual-Half-Bridge Converter Modulated With Three Degrees of Freedom

High-Performance Light Emitting Diode Lighting Circuits and Their Interior Design Applications

Small Signal Modeling and Transient Cross Regulation Analysis of Peak-Current-Mode-Controlled SIDO Buck LED Driver

Digital ZVS BCM Current Controlled Single-Phase Full-Bridge Inverter Using DSP TMS320F28035

Modeling of Single-Hb PWM Modulated Dual Active Bridge DC-DC Converter with Multifrequency Average Approach

Small-signal analysis and modeling of the Dual Active Half Bridge converter