Abstract:Theoretical prediction model for the compressive behavior of the hybrid tube considering compression angle. The oblique collision happening in vehicle accidents poses a huge threat to passive safety, which causes great difficulties in the design of energy absorption (EA) structures and the prediction of EA capacity due to its highly nonlinear deformation characteristics. This study aims to establish a theoretical prediction model for the compression performance of Carbon Fiber Reinforced Polymer (CFRP)/Al hybrid tube considering the loading angle. First, a high‐precision FE model was established to obtain the influence laws of tube diameter, Al thickness, and CFRP thickness on the crashworthiness of CFRP/Al hybrid tubes, laying the foundation for subsequent theoretical model validation. Second, by summarizing the deformation modes of hybrid tubes generated by various parameter combinations, a modified global origami deformation assumption was proposed under multi‐angle compression conditions, and the key terms in energy composition are extracted based on the initial and final states of folding elements. Third, a theoretical model for predicting the mean crushing forces (MCFs) of hybrid tubes was established by revealing the correlation mechanism between energy composition terms and loading angle. Finally, the theoretical prediction model was validated by experiment and simulation results and the application premise was given. Results showed that the theoretical prediction model was proved to be of high accuracy, as the average absolute prediction errors of MCF under axial, 10°, 20°, and 30° compression conditions were 6.54%, 4.63%, 3.72%, and 3.93%, respectively. This study provides valuable guidance for the forward design and development of multi‐material hybrid structures facing complex crushing conditions. Highlights An analytical model of the hybrid circular tubes considering compression angle is newly proposed. Deformation mode and axial crushing response are analyzed by experiments. The major energy dissipation mechanism for hybrid circular tubes is explicitly derived. The Al thickness has the most significant impact on energy absorption. The recommendations for the design and development of hybrid tube are provided.

Crushing Resistance Analysis and Cross-Sectional Parameters Optimization of Flexible Pipe Carcass Layer

Mechanical Analysis and Optimal Design for Carbon Fiber Resin Composite Wound Hydrogen Storage Vessel With Aluminum Alloy Liner

Numerical Study of CFRP-Bonded Pressure Pipes Subject to Impact Load

Finite Element Analysis of a Flexible Pipe Interlocked Carcass Under Tension Loads

Cross-Sectional Design and Case Study for Flexible Pipe

Cross-Sectional and Dynamic Analyses of Flexible Pipes

An analytical approach for assessing the collapse strength of an unbonded flexible pipe

Data-driven Semianalytical Method for Predicting Equivalent Thickness of Flexible Pipeline Carcass

Controlling Factors of Carcass Fatigue in Unbonded Flexible Pipes

Numerical and Experimental Study on Balanced Performance and Axial Stiffness of Fiber-Reinforced Rubber Pipe

Analysis of the Mechanical Behaviors of Fiber Reinforced Unbonded Flexible Pipe Under Combined Load

Theoretical and finite element methods for cross-section design of deep-sea flexible pipelines

Flexible Pipes: Influence of the Pressure Armor in the Wet Collapse Resistance

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Experimental and numerical investigation of crashworthiness of multicell metal/CFRP tubes

Cross-section parameterisation and optimisation of double-hat beams under dynamic three-point bending

The research on the critical loading path of thick-walled pipes under external pressure and cyclic bending

Cross-sectional mechanical characteristics and sensitivity analysis of unbonded flexible risers under axial loads

Theoretical prediction model for the compressive behavior of the hybrid tube considering compression angle

Numerical simulation and multi-objective optimization of thin-walled aluminum/carbon fiber reinforced plastic hybrid tubes under axial crushing

Mechanical Responses of a Fiberglass Flexible Pipe Subject to Tension & Internal Pressure