Abstract:Membrane technology is considered an innovative and promising approach due to its flexibility and low energy consumption. In this work, a comprehensive 3D-CFD model of the Hollow-Fiber Membrane Contactor (HFMC) system for CO2 capture into aqueous MEA solution, considering a counter-current fluid flow, was developed and validated with experimental data. Two different flow arrangements were considered for the gas mixture and liquid solution inside the HFMC module. The simulation results showed that the CO2 absorption efficiency was considerably higher when the gas mixture was channeled through the membranes and the liquid phase flowed externally between the membranes, across a wide range of gas and liquid flow rates. Sensitivity studies were performed in order to determine the optimal CO2 capture process parameters under different operating conditions (flow rates/flow velocities and concentrations) and HFMC geometrical characteristics (e.g., porosity, diameter, and thickness of membranes). It was found that increasing the membrane radius, while maintaining a constant thickness, positively influenced the efficiency of CO2 absorption due to the higher mass transfer area and residence time. Conversely, higher membrane thickness resulted in higher mass transfer resistance. The optimal membrane thickness was also investigated for various inner fiber diameters, resulting in a thickness of 0.2 mm as optimal for a fiber inner radius of 0.225 mm. Additionally, a significant improvement in CO2 capture efficiency was observed when increasing membrane porosity to values below 0.2, at which point the increase dampened considerably. The best HFMC configuration involved a combination of low porosity, moderate thickness, and large fiber inner diameter, with gas flow occurring within the fiber membranes.

CFD Simulation of CO2 Capture in a Microchannel by Aqueous Mixtures of MEA and [Bmim]BF4 Modified with TiO2 Nanoparticles

Efficient CO<sub>2</sub> capture by a novel deep eutectic solvent through facile, one-pot synthesis with low energy consumption and feasible regeneration

A Water-Lean Triazole Ionic Liquid Biphasic Solvent for Energy-Efficient CO2 Capture Through Reversible Polarity and Intermolecular Hydrogen Bonding

Performance of a Hybrid Solvent of Amino Acid and Ionic Liquid for CO 2 Capture

CFD modeling on the chemical absorption of CO2 in a microporous tube-in-tube microchannel reactor

CFD Analysis of CO2 Sequestration Applying Different Absorbents Inside the Microporous PVDF Hollow Fiber Membrane Contactor

Numerical evaluation of CO2 molecular removal from CO2/N2 mixture utilizing eco-friendly [emim][OAc] and [emim][MeSO4] ionic liquids inside membrane contactor

Theoretical investigations on the effect of absorbent type on carbon dioxide capture in hollow-fiber membrane contactors

Absorption of Carbon Dioxide into Aqueous Blend of Monoethanolamine and 1-Butyl-3-methylimidazolium Tetrafluoroborate

A simulation-based model studying monoethanolamine and Aprotic Heterocyclic Anion Ionic Liquid (AHA-IL) mixtures for carbon capture

A novel synergistic intensification method for CO 2 absorption by metal salt and task-specific ionic liquids hybrid solvent in microchannel reactor

Integration of membrane contactors and catalytic solvent regeneration for efficient carbon dioxide capture

Reducing the energy penalty and corrosion of carbon dioxide capture using a novel nonaqueous monoethanolamine-based biphasic solvent

Chemical Absorption Kinetics in MEA Solution with Nano-particles

Mechanism study on CO2 capture by ionic liquids made from TFA blended with MEA and MDEA

Co2 Absorption/Desorption Enhanced By Nanoparticles In Post-Combustion Co2 Capture

A Novel Hydrophilic Amino Acid Ionic Liquid [c(2)ohmim][gly] As Aqueous Sorbent for Co2 Capture

Simulation and Optimization for Flue Gas CO2 Capture by Energy Efficient Water-Lean Ionic Liquid Solvent

3D-CFD Modeling of Hollow-Fiber Membrane Contactor for CO2 Absorption Using MEA Solution

Boosting CO2 Absorption and Desorption of Biphasic Solvent by Nanoparticles for Efficient Carbon Dioxide Capture

Mixture Absorption System of Monoethanolamine−Triethylene Glycol for CO<sub>2</sub> Capture