Abstract:Rechargeable Li–CO2 batteries offer a sustainable strategy for CO2 utilization and energy storage in an environmentally friendly way. However, the current Li–CO2 batteries are restrained by unsatisfactory electrochemical performance and lack of cost-effectiveness in practical application. Thus, developing low-cost and highly effective electrode materials is crucial. Inspired by the concept of high nickel and low cobalt content in the electrode material, ultrafine Co0.1Ni0.9Ox nanoparticles decorated on carbon nanotubes (Co0.1Ni0.9Ox/CNT) are first developed in this work. Through various characterization techniques, the effects of doping Co2+ cations on the properties and electrochemical performance are systematically studied. At a current density of 100 mA g–1, a battery with the Co0.1Ni0.9Ox/CNT electrode delivers a high capacity of 5871.41 mA h g–1 with a Coulombic efficiency of 92.91% and a low overpotential of 3.94 V with an energy efficiency of 68%. At a cutoff capacity of 500 mA h g–1, the battery based on the Co0.1Ni0.9Ox/CNT electrode can be easily operated for 50 cycles without the trace of capacity degradation, which is nearly twice more than those with the NiO/CNT and CNT electrodes. Compared with the NiO/CNT electrode, the Co0.1Ni0.9Ox/CNT electrode exhibits superior electrocatalytic activity in oxidation and evolution reactions of CO2, which results from doping Co2+ cations in the NiO lattice to improve the p-type electronic conductivity. In addition, the polymer-like discharge products affected by doping Co2+ provide better reaction interfaces, curtailing the overpotential and reducing the life span. The results enlighten new ideas of fabricating high-performance and cost-effective electrode materials for prolonging the cycling life of Li–CO2 batteries toward practical applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02655.TEM images of NiO/CNT; TG–DTG curves of NiO/CNT and Co0.1Ni0.9Ox/CNT; nitrogen adsorption–desorption isotherm with the pore-size distribution of CNTs and NiO/CNT; full discharge–charge curves of CNTs, NiO/CNT, and Co0.1Ni0.9Ox/CNT; capacity-limited discharge–charge curves of CNTs, NiO/CNT, and Co0.1Ni0.9Ox/CNT; XRD patterns of NiO/CNT and CNTs; EIS results of Co0.1Ni0.9Ox/CNT; and specific surface area and pore volume of CNTs, NiO/CNT, and Co0.1Ni0.9Ox/CNT (PDF)This article has not yet been cited by other publications.

Insight into the Synergistic Effect of N, S Co‐Doping for Carbon Coating Layer on Niobium Oxide Anodes with Ultra‐Long Life

Surface Coating of NCM-811 Cathode Materials with G-C3n4 for Enhanced Electrochemical Performance.

Improving the Sodium Storage Performance of Porous Carbon Derived From Covalent Organic Frameworks Through N, S Co-Doping

Sandwich-like N-doped carbon coated SnNb2O6 nanosheets for high-rate and long-life lithium storage

Bifunctional effects of nitrogen-doped carbon quantum dots on CoS 2 /mesoporous carbon composites for high-performance lithium-ion batteries

1D Nb-doped LiNi1/3Co1/3Mn1/3O2 Nanostructures As Excellent Cathodes for Li-ion Battery

Nanoscale surface modification of P2-type Na0.65[Mn0.70Ni0.16Co0.14]O2 cathode material for high-performance sodium-ion batteries

Ultrafine Co-Doped NiO Nanoparticles Decorated on Carbon Nanotubes Improving the Electrochemical Performance and Cycling Stability of Li–CO 2 Batteries

Improved cycle performance of nitrogen and phosphorus co-doped carbon coatings on lithium nickel cobalt aluminum oxide battery material

A Multifunctional Coating on Sulfur-Containing Carbon-Based Anode for High-Performance Sodium-Ion Batteries

Enhancing performance of NiCo Sulfide composite cathode by Mn doping in Li-S batteries

Enabling the Strengthened Structural and Interfacial Stability of High‐Nickel LiNi0.9Co0.05Mn0.05O2 Cathode by a Coating‐Doping‐Microstructure Regulation Three‐In‐One Strategy

Nitrogen‐Doped Nanoporous Graphenic Carbon: An Efficient Conducting Support for O

Facile Fabrication of SiO2 Nanotubes Coated with Nitrogen-Doped Carbon Layers As High-Performance Anodes for Lithium-Ion Batteries

Heteroatom doping and activation of carbon nanofibers enabling ultrafast and stable sodium storage

Improving the Electrochemical Performances and Structural Stability of Ultrahigh-Ni Cathodes by Using Multi-Element Co-Doping Methods

Investigation of Li 3 PO 4 Coating and Nb 5+ Doping Effect on the Crystal Structure and Electrochemical Properties of Ni-Rich LiNi 0.85 Co 0.05 Mn 0.10 O 2 Cathode

Research on Nb doping–coating composite modification of LiNiO2 cathode material for lithium-ion batteries

Constructing nitrogen-doped porous carbon immobilized Co9S8 composite as high-performance anode material for sodium-ion batteries

Co3O4/nitrogen-doped carbon nanoparticles for high-performance Li/Na-ion batteries

Si@Nitrogen-Doped Carbon Nanoparticles for Lithium-Ion Battery Anodes