Abstract:The following work is an in-depth investigation of the heat transfer characteristics and cooling effectiveness of a full-scale fully cooled modern high-pressure turbine (HPT) vane as a result of genetic algorithm (GA) optimization, relative to a modern baseline film cooling configuration. Individual designs were evaluated using 3D Reynolds-averaged Navier–Stokes (RANS) computational fluid dynamics (CFD) that modeled film cooling injection using a transpiration boundary condition and evaluated 10 cells from the wall with an isothermal surface condition. 1800 different cooling arrays were assessed for fitness within the optimization where film cooling parameters such as axial and radial hole location, hole size, injection angle, compound angle, and custom-designed row patterns were varied in the design space. The GA optimization terminated with a unique pressure side (PS) cooling array after only 13 generations. The fitness functions prescribed for the problem lowered the PS average near-wall surface temperature, lowered the near-wall maximum temperature, and maintained the level of near-wall average overall effectiveness. Results show how the optimization resulted in redistributed flow from overcooled areas on the vane PS to undercooled areas near the shroud. The optimized cooling array yielded a reduction of average near-wall gas temperature of 2 K, a reduction in the maximum near-wall gas temperature of 3 K, a reduction in maximum heat flux of 2 kW/m2 and a reduction in pressure loss over the vane, all while maintaining a constant level of surface-averaged overall effectiveness. Methods used to improve pressure side film cooling performance here are promising in terms of eliminating hot spots on individual HPT components in their proper operating environments as well as increasing the potential to use less air for cooling purposes in a gas turbine engine.

Optimization for Hot-film Anti-icing Structure by BPNN and GA

Aerodynamic Optimization Design of Airfoil Configurations Based on Cascade Feedforward Neural Network

A Practical Optimization Design Method for Transport Aircraft Wing/Nacelle Integration

Shape optimization of inlet header of microchannel heat sink using surrogate model combined with genetic algorithm

Anti-Icing System Performance Prediction Using POD and PSO-BP Neural Networks

Design of Steam Thermal Deicing Control System for Wind Turbine Blades Based on BP Neural Network Algorithm

Optimal Design Approach for the Plate-Fin Heat Exchangers Using Neural Networks Cooperated with Genetic Algorithms

Thermodynamic Optimization of Aircraft Environmental Control System Using Modified Genetic Algorithm

Single- and multi-objective optimization of an aircraft hot-air anti-icing system based on Reduced Order Method

Volume Flow Rate Optimization of an Axial Fan by Artificial Neural Network and Genetic Algorithm

Airfoil shape optimization using genetic algorithm coupled deep neural networks

Prediction of Temperature Distribution on an Aircraft Hot-Air Anti-Icing Surface by ROM and Neural Networks

Automated Optimization Design of Hypersonic Inlet Using Genetic Algorithm

Geometrical Optimization Design of Plate-fin Heat Exchanger Using Genetic Algorithm

Genetic Algorithm Optimization of a High-Pressure Turbine Vane Pressure Side Film Cooling Array

Artificial Neural Network Model of Airfoil Aerodynamic Performance Using Design of Experiments

Knowledge Based Aero Thermal Multi Disciplinary Design Optimization of a High Temperature Blade

Global aerodynamic optimization method using genetic algorithms and surrogate model

Optimization of the aero-engine thermal management system with intermediate cycle based on heat current method

HNN-based generalized predictive control for turbofan engine direct performance optimization

AERODYNAMIC OPTIMIZATION FOR TURBINE BLADE BASED ON HIERARCHICAL FAIR COMPETITION GENETIC ALGORITHMS WITH DYNAMIC NICHE