Abstract:<span>For the stability analysis of functionally graded material (FGM) sandwich plates, a semi-analytical scaled boundary finite element method (SBFEM) is established within the frame work of layerwise theory in this paper. Two different configurations of FGM sandwich plates are studied, one of which consists of ceramic-rich core and FGM face sheets, and another involves metal-rich and ceramic-rich material face sheets as well as a FGM core, and the modulus of elasticity for each FGM layer is assumed to be changed continuously along thickness according to a power-law distribution. The layerwise theory performed in present work is based on the three-dimensional theory of elasticity for each individual layer satisfying the displacement continuity boundary conditions at layer interfaces, and the two-dimensional high order spectral element with three degrees of freedom per node is employed to discrete the reference surface of each individual layer. And then, based on the principle of virtual work, the SBFEM governing equation for each individual layer of FGM sandwich plates is derived, and a dual variable including the displacement and internal nodal force is used to reduce the governing equations to a system of first-order ordinary differential equation, which is solved analytically by a general approach. Finally, the critical buckling load can be obtained by solving the eigenvalue equation once the bending stiffness matrix and geometric stiffness matrix of FGM sandwich plates are determined. Fast rate of convergence of the proposed formulations is confirmed and comparison studies are presented to construct its high accuracy and excellent predictive capability. Furthermore, effects of gradient index, side-to-thickness ratio, layer configuration, and boundary conditions on dimensionless critical buckling loads of FGM sandwich plates are also studied. The proposed semi-analytical approach is simple in program implementation, accurate and computationally efficient.</span>

Buckling Characteristics of FGM Plates Subjected to Linearly Varying In-Plane Loads

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

Free Axisymmetric Vibrations Of Fgm Circular Plates

BUCKLING ANALYSIS OF CIRCULAR FGM PLATE HAVING VARIABLE THICKNESS UNDER UNIFORM COMPRESSION BY MESH FREE METHOD

Buckling Analysis of Functionally Graded Sandwich Plates under Both Mechanical and Thermal Loads

Post-buckling Behavior of Rectangular Multilayer FG-GPLRC Plate with Initial Geometric Defects Subjected to Non-Uniform In-Plane Compression Loads in Thermal Environment

Buckling analysis of three-dimensional functionally graded sandwich plates using two-dimensional scaled boundary finite element method

Hygrothermal buckling analysis of thin rectangular FGM plate with variable thickness

Thermal buckling analysis of annular FGM plate having variable thickness under thermal load of arbitrary distribution by finite element method

Buckling of Simply Supported Thin Plate with Variable Thickness under Bi-Axial Compression Using Perturbation Technique

A numerical study on the thermal buckling of variable thickness Mindlin circular FGM plate on a two-parameter foundation

Nonlinear Dynamic Analysis for Rectangular FGM Plates with Variable Thickness Subjected to Mechanical Load

Analysis of the Functionally Step-Variable Graded Plate Under In-Plane Compression

Ritz Method-Based Formulation for Analysis of FGM Thin Plates Undergoing Large Deflection with Mixed Boundary Conditions

Vibration and Buckling Analysis of Elastically Supported Bi-directional FGM Mindlin Circular Plates Having Variable Thickness

Bending and vibration of functionally graded material sandwich plates using an accurate theory

Instability of FGM rectangular hollow section (RHS) beam element under combined bending and compressive loads

Axisymmetric Postbuckling Analysis of Size-Dependent Functionally Graded Annular Microplates Using the Physical Neutral Plane

Semianalytical Three-Dimensional Solutions for the Transient Response of Functionally Graded Material Rectangular Plates

Buckling analysis of thin rectangular FG-CNTRC plate subjected to arbitrarily distributed partial edge compression loads based on differential quadrature method

Buckling analysis of circular functionally graded material plate having variable thickness under uniform compression by finite-element method