Abstract:BackgroundA two-stage chemical pretreatment of corn stover is investigated comprising an NaOH pre-extraction followed by an alkaline hydrogen peroxide (AHP) post-treatment. We propose that conventional one-stage AHP pretreatment can be improved using alkaline pre-extraction, which requires significantly less H2O2 and NaOH. To better understand the potential of this approach, this study investigates several components of this process including alkaline pre-extraction, alkaline and alkaline-oxidative post-treatment, fermentation, and the composition of alkali extracts.ResultsMild NaOH pre-extraction of corn stover uses less than 0.1 g NaOH per g corn stover at 80°C. The resulting substrates were highly digestible by cellulolytic enzymes at relatively low enzyme loadings and had a strong susceptibility to drying-induced hydrolysis yield losses. Alkaline pre-extraction was highly selective for lignin removal over xylan removal; xylan removal was relatively minimal (~20%). During alkaline pre-extraction, up to 0.10 g of alkali was consumed per g of corn stover. AHP post-treatment at low oxidant loading (25 mg H2O2 per g pre-extracted biomass) increased glucose hydrolysis yields by 5%, which approached near-theoretical yields. ELISA screening of alkali pre-extraction liquors and the AHP post-treatment liquors demonstrated that xyloglucan and β-glucans likely remained tightly bound in the biomass whereas the majority of the soluble polymeric xylans were glucurono (arabino) xylans and potentially homoxylans. Pectic polysaccharides were depleted in the AHP post-treatment liquor relative to the alkaline pre-extraction liquor. Because the already-low inhibitor content was further decreased in the alkaline pre-extraction, the hydrolysates generated by this two-stage pretreatment were highly fermentable by Saccharomyces cerevisiae strains that were metabolically engineered and evolved for xylose fermentation.ConclusionsThis work demonstrates that this two-stage pretreatment process is well suited for converting lignocellulose to fermentable sugars and biofuels, such as ethanol. This approach achieved high enzymatic sugars yields from pretreated corn stover using substantially lower oxidant loadings than have been reported previously in the literature. This pretreatment approach allows for many possible process configurations involving novel alkali recovery approaches and novel uses of alkaline pre-extraction liquors. Further work is required to identify the most economical configuration, including process designs using techno-economic analysis and investigating processing strategies that economize water use.

Effects of milling combined with extremely low-liquid ammonia (ELLA) pretreatment to enhance enzymatic hydrolysis of corn stover

Combinations of Fungal and Milling Pretreatments for Enhancing Rice Straw Biogas Production During Solid-State Anaerobic Digestion.

Pretreatment of Corn Stover for Enzymatic Saccharification Improvement by Using the Combination of Alkaline Reagents at Mild Temperatures

Comparison of Hydrogen Peroxide and Ammonia Pretreatment of Corn Stover: Solid Recovery, Composition Changes, and Enzymatic Hydrolysis

Ball Milling for Biomass Fractionation and Pretreatment with Aqueous Hydroxide Solutions

Pretreatment of Lignocellulosic Biomass with Recycled Black Liquor for Sugar Production

Comparison of four different chemical pretreatments of corn stover for enhancing enzymatic digestibility

Ball Milling Pretreatment of Corn Stover for Enhancing the Efficiency of Enzymatic Hydrolysis

Enhancement of Liquid Hot Water Pretreatment on Corn Stover with Ball Milling to Improve Total Sugar Yields

Effect of Alkali and Ball Milling on Enhancing Biomass Depolymerization in the Combined Mechanochemical Catalysis

Mild Urea/KOH Pretreatment to Enhance Enzymatic Hydrolysis of Corn Stover with Liquid Waste Recovery for Plant Growth

Effect of combined wet alkaline mechanical pretreatment on enzymatic hydrolysis of corn stover and its mechanism

Process Intensification Effect of Ball Milling on the Hydrothermal Pretreatment for Corn Straw Enzymolysis

High-solids enzymatic hydrolysis of ball-milled corn stover with reduced slurry viscosity and improved sugar yields

Effect of alkali salt-coupled ball milling pretreatment of wheat straw on improving enzymatic hydrolysis and energy efficiency

A Novel Wet-Mechanochemical Pretreatment for the Efficient Enzymatic Saccharification of Lignocelluloses: Small Dosage Dilute Alkali Assisted Ball Milling

Low-temperature EDA/urea pretreatment improves enzymatic hydrolysis of corn stover through changing physical and chemical structure

Coupling alkaline pre-extraction with alkaline-oxidative post-treatment of corn stover to enhance enzymatic hydrolysis and fermentability

Impacts of Cellulase and Amylase on Enzymatic Hydrolysis and Methane Production in the Anaerobic Digestion of Corn Straw

Hydrolyzabilities of Different Corn Stover Fractions after Aqueous Ammonia Pretreatment

Combined Ball Milling and Ethanol Organosolv Pretreatment to Improve the Enzymatic Digestibility of Three Types of Herbaceous Biomass