Abstract:Pyrite is the earth’s most abundant sulfide mineral. Its frequent undesirable association with minerals of economic value such as sphalerite, chalcopyrite and galena, and precious metals such as gold necessitates costly separation processes such as leaching and flotation. Additionally pyrite oxidation is a major contributor to the environmental problem of acid rock drainage. The surface oxidation reactions of pyrite are therefore important both economically and environmentally.Significant variations in electrical properties resulting from lattice substitution of minor and trace elements into the lattice structure exist between pyrite from different geographical locations. Furthermore the presence of low coordination surface sites as a result of conchoidal fracture causes a reduction in the band gap at the surface compared to the bulk thus adding further electrochemical variability. Given the now general acceptance after decades of research that electrochemistry dominates the oxidation process, the geographical location, elemental composition and semi-conductor type (n or p) of pyrite are important considerations.Aqueous pyrite oxidation results in the production of sulfate and ferrous iron. However other products such as elemental sulfur, polysulfides, hydrogen sulfide, ferric hydroxide, iron oxide and iron(III) oxyhydroxide may also form. Intermediate species such as thiosulfate, sulfite and polythionates are also proposed to occur. Oxidation and leach rates are generally influenced by solution Eh, pH, oxidant type and concentration, hydrodynamics, grain size and surface area in relation to solution volume, temperature and pressure. Of these, solution Eh is most critical as expected for an electrochemically controlled process, and directly correlates with surface area normalised rates. Studies using mixed mineral systems further indicate the importance of electrochemical processes during the oxidation process.Spatially resolved surface characterisation of fresh and reacted pyrite surfaces is needed to identify site specific chemical processes. Scanning photoelectron microscopy (SPEM) and photoemission electron microscopy (PEEM) are two synchrotron based surface spectromicroscopic and microspectroscopic techniques that use XPS- and XANES-imaging to correlate chemistry with topography at a submicron scale. Recent data collected with these two techniques suggests that species are heterogeneously distributed on the surface and oxidation to be highly site specific.

Visualization of Biofilm Formation and Eps of S. Thermosulfidooxidans Yn22 on Pyrite with Different Crystal Faces

Oxidative Dissolution Mechanisms of Pyrite {100} and {210} Faces: An Atomic Study

Biofilm formation and development during the pyrite bioleaching of moderately thermophilic microorganisms

In-situ characterization of dynamic Acidithiobacillus ferrooxidans -pyrite interaction via QCM-D-based method: Cell adhesion and biofilm formation in responding to surface sulfur speciation

Interfacial alteration of pyrite caused by bioleaching

Changes in biofilm structure during the colonization of chalcopyrite by Acidithiobacillus thiooxidans

Arsenopyrite Bio-Oxidization Behavior in Bioleaching Process: Evidence From Laser Microscopy, SEM-EDS, and XPS

Sulfur Transformation in Microbially Mediated Pyrite Oxidation by Acidithiobacillus Ferrooxidans: Insights from X-ray Photoelectron Spectroscopy-Based Quantitative Depth Profiling

Analysis of Genes and Proteins in Acidithiobacillus ferrooxidans During Growth and Attachment on Pyrite Under Different Conditions

The effects of the typical components of extracellular polymeric substances(EPS) of microorganism on the bio-decomposition of pyrite

The mechanisms of pyrite oxidation and leaching: A fundamental perspective

Pyrite Surface after Thiobacillus Ferrooxidans Leaching at 30°C

Effect of surface oxidation on interfacial water structure at a pyrite (100) surface as studied by molecular dynamics simulation

Surface properties and flotation inhibition mechanism of air oxidation on pyrite and arsenopyrite

Differential surface modification mechanism of chalcopyrite and pyrite by Thiobacillus ferrooxidans and its response to bioflotation

New Insights into the Oxidation Mechanism of Pyrite in Copper-Containing Sulfuric Acid: An Electrochemical, AFM, Raman Spectroscopy and XPS Investigation

The Influence of Inorganic and Organic Components of Biofilms with Microscopic Fungi on the Phase Composition and Morphology of Crystallizing Calcium Oxalates

Replacement of pyrrhotite by pyrite and marcasite under hydrothermal conditions up to 220 °C: An experimental study of reaction textures and mechanisms

The Interaction Of Cus And Halothiobacillus Ht1 Biofilm In Microscale Using Synchrotron Radiation-Based Techniques

Evolutions of structure, composition and optical absorption behavior of pyrite films formed by sulfurating iron

Direct Detection of Fe(II) in Extracellular Polymeric Substances (EPS) at the Mineral-Microbe Interface in Bacterial Pyrite Leaching