Abstract:Low-frequency noise has always been a thorny problem in the field of noise control. In recent years, the development of sound-absorbing metastructures has provided new ideas for low-frequency noise control. In this paper, we propose low-frequency sound-absorbing metastructures constructed by Helmholtz resonators with embedded slit. Analytical and numerical models were established to analyze the sound absorption performance and mechanism of the proposed sound-absorbing metastructure, and optimization design was conducted to achieve low-frequency wideband absorption performance. The analytical modeling method and the performance of the proposed sound-absorbing metastructure were also experimentally verified. The main conclusions are summarized as follows: 1) Based on the use of transfer matrix method and finite element method, analytical and numerical models for calculation of sound absorption coefficient were established. It was shown that analytical predictions are in good agreement with numerical calculations. It was demonstrated that a typical design of a single-cell metastructure with 30mm thickness can achieve a sound absorption coefficient of 0.88 at 404 Hz. Typical designs of two-cell and the four-cell parallel structures (with 50 mm thickness) can achieve two and four near-perfect low-frequency sound absorption peaks within the frequency band of 200-400 Hz, respectively. 2) The low-frequency sound absorption mechanisms of the proposed metastructure were explained from four aspects: simplified equivalent model parameters, normalized acoustic impedance, complex-plane zero/pole distribution, sound pressure cloud image and particle velocity field distribution. It was demonstrated that the main sound absorption mechanism is associated with the thermal viscous loss of sound waves caused the inner wall of embedded slit. 3) Optimization design for broadband low-frequency absorption performance was carried out by using differential evolution optimization algorithm. A parallel-multi-cell coupled metastructure with multiple perfect sound absorption peaks below 500Hz was optimized. Under the condition of thickness 90mm, the sound absorption coefficient curve of an optimized metastructure exhibited 8 near-perfect sound absorption peaks and an average sound absorption coefficient of 0.86 within the frequency range of 170-380 Hz. 4) Experimental samples were fabricated to carry out sound absorption tests. Experimental results were basically consistent with the analytical predictions. Mutual verification of analytical model, numerical calculation and experimental measurements was completed. To sum up, the sound-absorbing metastructures proposed in this paper have outstanding sound absorption performance at low frequencies with sub-wavelength thickness. We demonstrated they are suitable for low frequency broadband sound absorption below 500 Hz. Thanks to their thin thickness and relatively simple construction, they have broad application prospects in practical noise control engineering.

Inverse design of structured materials for broadband sound absorption

Design and Optimization of Low-Frequency Broadband Acoustic Absorption Structures Based on Multi-Cellular Element Co-Coupling

Low-frequency broadband sound absorption of the metastructure with extended tube resonators and porous materials

Microstructure topology optimization of underwater anechoic layers via moving morphable component (MMC) method

Improved low-frequency sound absorption of porous silicone rubber resonance sheet with periodic cavities

Broadband Thin Sound Absorber Based on Hybrid Labyrinthine Metastructures with Optimally Designed Parameters

Broadband high-efficiency meta-structures design by acoustic critical absorption effect

Rectangular extended neck Helmholtz resonant acoustic structure for low frequency broadband sound absorption

Metasurface Absorber for Ultra-Broadband Sound Via Over-Damped Modes Coupling

A foldable underwater acoustic meta-structure with broadband sound absorption at low frequency

A New Type of Artificial Structure to Achieve Broadband Omnidirectional Acoustic Absorption

Ultrathin acoustic metamaterial as super absorber for broadband low-frequency underwater sound

A compact multifunctional metastructure for Low-frequency broadband sound absorption and crash energy dissipation

A lightweight waterborne acoustic meta-absorber with low characteristic impedance rods

Design, analysis, and experimental validation of a sonic black hole structure for near-perfect broadband sound absorption

Superior underwater sound-absorbing metasurface based on wave mode conversion and cavity-plate coupling resonance

Mechanism analysis and optimal design of sound-absorbing metastructure constructed by slit-embedded Helmholtz resonators

Topological design of lattice materials with application to underwater sound insulation

Ultra-broadband sound absorption of a multiple-cavity metastructure with gradient thickness

Low-frequency broadband acoustic metamaterial absorber based on nested resonator and synergistic coupled weak resonances

Porous-Solid Metaconverters for Broadband Underwater Sound Absorption and Insulation