Abstract:After preparing the NiAl composite cladding layer, it is found that the lattice spacing has significantly changed with the addition of Cu element. The formation of microcracks and coarse columnar crystals is suppressed, which contributes to achieving the microstructure refinement and the performance of the coating is improved to resist wear and corrosion. Intermetallic compounds with special physical and chemical properties are considered to be advanced materials. However, the brittleness at room temperature of intermetallic compounds leads to poor performance, which limits its widespread application in engineering. The objective of this study is to investigate the strengthening mechanism of the copper (Cu) on the microstructure and material performance of WC/NiAl/TiC composite coatings by the laser cladding process. The results reveale that Cu element has a significant effect on the microstructure evolution of the coatings by inhibiting coarse crystal formation. The refined microstructure of the layer had been realized. X‐ray diffraction (XRD) analysis demonstrate a reduction in lattice spacing within the composite coating structure as the proper Cu is added. Furthermore, the addition of Cu contributed to an enhancement in microhardness (868.9 HV0.2) and wear resistance. With 3% copper been added, the wear loss of the coatings has been reduced by 81.13% and the average microhardness value has been increased by 1.4 times as well. Moreover, the chemical metallurgical bond is produced between the particles and bonding phase resulting in strengthened compactness within the layer acting as a physical barrier‐like film that increases polarization resistance.

Effect of Copper Addition on the Phase Composition and Microstructure Evolution of Fe-Based Amorphous Alloy Coatings Prepared by Laser Cladding

Effect of Process Parameters on Microstructure and Properties of AlCoCrFeNi-WC-WS2 Composite Coating Prepared by Laser Cladding

Laser Cladding Fe/FeCr Coatings on Continuous Casting Cu Mold

Effect of Copper on Microstructure and Performance of WC/NiAl/TiC Composite Coatings by Laser Cladding

Fabrication of Fe-based amorphous composite coating by laser cladding

Microstructure and mechanical properties of Fe-based amorphous alloy coatings prepared by ultra-high speed laser cladding

Enhancing Surface Properties of Cu-Fe-Cr Alloys through Laser Cladding: The Role of Mo and B4C Additives

Effect of WC–Co addition on tribological and cracking behavior of laser cladded Fe-based amorphous/crystalline composite coatings

Influence of Scanning Speed on Microstructure and Properties of Laser Cladded Fe-Based Amorphous Coatings

Microstructures and corrosion resistance of Fe-based amorphous/nanocrystalline coating fabricated by laser cladding

Investigation on microstructure and mechanical properties of Fe-based amorphous coatings prepared via laser cladding assisted with ultrasonic vibration

Effect of Laser Energy Density on Amorphous Phase Content and Properties of Fe-Based Amorphous Coatings

Microstructure and Wear Resistance of Fe-Cr-Mo-Co-C-B Amorphous Composite Coatings Synthesized by Laser Cladding

Study on toughening of Fe based amorphous coatings by ultra high speed laser cladding

Effect of Cu on microstructure and properties of Co 2 CrFeNiMnCu x high-entropy alloy coatings prepared by laser cladding

Effect of Cu-doping on tribological properties of laser-cladded FeCoCrNiCu x high-entropy alloy coatings

Synthesis and characterization of FeCoNiCrCu high-entropy alloy coating by laser cladding

Synergistic effect of carbide and amorphous phase on mechanical property and corrosion resistance of laser-clad Fe-based amorphous coatings

Microstructure and properties analysis of AlCoCrFeNi high-entropy alloy/iron-based amorphous composite coatings prepared by laser cladding

Fabrication of Amorphous Coating by Laser Cladding Using Industrial-grade Fe-based Alloy

Corrosion Performance of Fe-Based Amorphous Coatings via Laser Cladding Assisted with Ultrasonic in A Simulated Marine Environment