Abstract:Purpose Fire safety of a building is becoming a prominent consideration due to the recent fire accidents and the consequences in terms of loss of life and property damage. ISO 834 standard fire test regulation and simulation cannot be applied to assess the fire performance of 3D printed concrete (3DPC) walls as the real fire time-temperature curves could be more severe, compared to standard fire curve, in terms of the maximum temperature and the time to reach that maximum temperature. Therefore, this paper aims to describe an investigation on the fire performance of 3DPC composite wall panels subjected to different fire scenarios. Design/methodology/approach The fire performance of 3DPC wall was traced through developing an appropriate heat transfer numerical model. The validity of the developed numerical model was confirmed by comparing the time-temperature profiles with available fire test results of 3DPC walls. A detailed parametric study of 140 numerical models were, subsequently, conducted covering different 3DPC wall configurations (i.e. solid, cavity and rockwool infilled cavity), five varying densities and consideration of four fire curves (i.e. standard, hydrocarbon fire, rapid and prolong). Findings 3DPC walls and Rockwool infilled cavity walls showed superior fire performance. Furthermore, the study indicates that the thermal responses of 3DPC walls exposed to rapid-fire is crucial compared to other fire scenarios. Research limitations/implications To investigate the thermal behaviour, ABAQUS allows performing uncoupled and coupled thermal analysis. Coupled analysis is typically used to investigate combined mechanical-thermal behaviour. Since, considered 3DPC wall configurations are non-load bearing, uncouple heat transfer analysis was performed. Time-temperature variations can be obtained to study the thermal response of 3DPC walls. Originality/value At present, there is limited study to analyse the behaviour of 3DPC composite wall panels in real fire scenarios. Hence, this paper presents an investigation on the fire performance of 3DPC composite wall panels subjected to different fire scenarios. This research is the first attempt to extensively study the fire performance of non-load bearing 3DPC walls.

Evaluating the fire risk associated with cladding panels: An overview of fire incidents, policies, and future perspective in fire standards

Effect of protective cladding on the fire performance of vertically loaded cross-laminated timber (CLT) wall panels

Full-Scale Fire Experiments on Cross-Laminated Timber Residential Enclosures Featuring Different Lining Protection Configurations

The development process of a candidate screening test for cladding products

Review of fire experiments in mass timber compartments: Current understanding, limitations, and research gaps

Thermodynamic and Kinetic Characteristics of Combustion of Discrete Polymethyl Methacrylate Plates with Different Spacings in Concave Building Facades

A Review of Combustion and Flame Spread over Thermoplastic Materials: Research Advances and Prospects

A Study on the Quantitative Fire Performance Evaluation Method of Building Finishing Materials with a Focus on Medical Facilities

Quantitative Assessment of Whether Phosphorus-Based Flame Retardants Are Optimizing or Degrading the Fire Hazard of Aircraft Carbon Fiber/epoxy Composites

A Comparative Analytical Study of Some External Finishing (Cladding) Material in Terms of Their Ability to Spread Fire in Multi-story Building Facades in Iraq

Review of the NRC Canada studies on fire resistance of floor assemblies: Results, design guidelines and research gaps

Fire resistance of 3D printed concrete composite wall panels exposed to various fire scenarios

High-performance flame-retardant polycarbonate composites: Mechanisms investigation and fire-safety evaluation systems establishment

A Facile Bioinspired Fire Coating Hybridising Carbon-Derived Peanut Shells and Black Phosphorous for Timber Structures: Experimental and Numerical Characterisation

Fire Resistance and Mechanical Properties of the Fire-Resistant Board

Analyzing Temperature Distribution Patterns on the Facing and Backside Surface: Investigating Combustion Performance of Flame-Retardant Particle Boards Using Aluminum Hypophosphite, Intumescent, and Magnesium Hydroxide Flame Retardants

Evaluation of exterior wall cavity fires using an intermediate scale test method

Ensuring fire safety: compliance tests for the use of polystyrene foam in facades systems

Resistance and Serviceability Assessment of Innovative Composite Slab Exposed to Standard Compartment Fire

Upward Fire Spread Rate Over Real-Scale EPS ETICS Façades

Experimental and Numerical Analysis of Residual Load-Carrying Capacity of Cross-Laminated Timber Walls after Fire