Abstract:Cable supported bridges are typically part of community-critical infrastructure and therefore the consequences arising from extensive structural damage due to a fire and the subsequent operational discontinuity could be significant beyond the damage to the bridge itself and the cost of repairs. Bridge design standards generally do not provide guidance and hence fire resistance requirements are often informed by first principles assessments of the thermal and structural response of the structure to proposed fire scenarios. A deterministic assessment can provide a reasonable worst-case scenario but it does not allow bridge stakeholders to make informed decisions with regards to uncertainty and the low likelihood of fires occurring to identify the benefits of investments in structural fire protection. This is because the target reliability required for each bridge may be different depending on its characteristics, and the expected fire severity has a probabilistic nature. This research aims to fill this gap by undertaking a reliability-based analysis to assess the probability of structural failure by considering the probability of a fire of a given size occurring and the uncertainty in the incident location and wind. The methodology is demonstrated through the case study of an operational 450 m long cable supported bridge section and a fire scenario based on a liquid fuel tanker. Liquid tankers can result into two type of fire scenario: first, a fire being contained within the tanker; and secondly, a fire due to a pool on the deck. Both fire scenarios have been characterised and it was determined that the contained tanker scenario presents a more onerous design case owing to its more prolonged duration. A Monte Carlo analysis was undertaken for a total of 10,000 independent trials of the combination of the location of the fire and the wind direction. The frequency of the fire was also examined to establish the probability of structural failure of a cable. It was established that the inclusion of wind can sometimes reduce the estimated height at which cables may experience temperatures with the potential to cause cable failure. However, for a number of the cases, the estimated height can remain broadly similar (i.e. within a couple metres difference) to the worst-case calculated value. Based on this analysis, the influence of the required level of reliability as well the fire protection duration specification agreed with bridge stakeholders can be used to determine the height at which cable fire protection is necessary to reduce the probability of structural failure to a level acceptable to the stakeholders. This approach allows bridge designers and stakeholders to make informed decisions with regards to provision and extent of fire preventive/protective measures for cable supported bridges.

Experimental Thermal Performance of Unloaded Spiral Strand and Locked Coil Cables Subject to Pool Fires

Evaluation of Thermal Effects on Cable Forces of a Long-Span Prestressed Concrete Cable–Stayed Bridge

Experimental Study on Stress Relaxation Properties of Structural Cables

Experimental study of the temperature characteristics of the main cables and slings in suspension bridge fires

Experimental Investigation on Combustion Characteristics of Steel Cable for Cable-Stayed Bridge

Development of fire protection for bridge cable systems

Comparative investigation on fire resistance of different fire prevention schemes for 1670 MPa steel wires used in bridge cables

Performance of steel cable-stayed bridges in ship fires, part I: Numerical method and baseline fire scenario study

Reliability-based Fire Protection of Structural Cables due to Deck Fires on Cable Supported Bridges

The Role of Tendons for Fire Safety Design of Pre‐tensioned Steel Structures

Flame Spread Experiments on a Horizontal Preheated Cable Layer

Fire resistance analysis and protection measures for cable components of suspension bridges

Theoretical analysis and numerical simulation on behaviour properties of large span cable-supported structures under fire conditions

Investigation into the Prestress Loss and Thermal Expansion Performance of Steel Cables at High Temperature

ANALYTICAL METHOD FOR MECHANICAL RESPONSE OF PRE-TENSION STEEL CABLES EXPOSED TO LOCALISED FIRES

Effect of Cavity Radiation on Transient Temperature Distribution in Steel Cables under ISO834 Fire

Experimental study of epoxy coatings for fire protection of bridge cables

Post-fire mechanical properties of stainless steel cables

Research progress on high-temperature properties of carbon fiber reinforced polymer composites for cables

Test and Analysis of Postfire Fatigue Performance of Steel Wires and Cables

Constitutive Model and Mechanical Properties of Grade 1960 Steel Wires under Fire and Post-Fire Conditions