Valorization of fava, lentil, pea, and soya husks as sustainable adsorbents for lead removal from contaminated water: characterization, adsorption kinetics, and isotherms
Zarifeh Raji,Ahasanul Karim,Antoine Karam,Mohammed Aider,Seddik Khalloufi
DOI: https://doi.org/10.1007/s13399-024-06068-1
IF: 4.05
2024-09-01
Biomass Conversion and Biorefinery
Abstract:The environmental release of heavy metals presents significant threats to human health and ecosystems, necessitating the development of effective remediation strategies. Biosorption has emerged as an eco-friendly and cost-effective method for the removal of heavy metals from contaminated water. In this study, the potential of fava husk (FH), lentil husk (LH), pea husk (PH), and soya husk (SH) as sustainable biosorbents for lead (Pb) removal from aqueous solutions was investigated. Experiments were conducted under varying initial Pb (II) concentrations, with biosorbents incubated for 3 days at room temperature without pH adjustment. Key parameters, including biosorbent amount (1.66–9.99 g), contact time (1 min to 3 days), and initial Pb concentration (10–7000 mg/L), were optimized. Maximum Pb adsorption capacities were observed at 5000 mg/L for FH (115,544 μg/g), PH (100,337 μg/g), and SH (119,841 μg/g), and at 4000 mg/L for LH (95,190 μg/g). Optimal removal efficiencies were achieved at 1000 mg/L Pb, with 98.0%, 97.7%, 97.7%, and 97.2% for FH, LH, PH, and SH, respectively, at a biosorbent dose of 3.33 g/100 mL and a 3-day contact time. Rapid adsorption kinetics were observed, with over 90% Pb removal occurring within 5 min. Superior adsorption capacities exhibited by SH and FH were attributed to their functional groups, active sites, high specific surface area, and cation exchange capacity. Structural change post-adsorption was revealed by Fourier transform infrared and scanning electron microscopy analyses. The equilibrium data conformed to the Langmuir isotherm model, indicating homogeneous monolayer adsorption, while the kinetic analysis followed pseudo-second-order kinetics.
energy & fuels,engineering, chemical