Abstract:In this paper, a high-static-low-dynamic stiffness (HSLDS) vibration isolator with a novel parabolic-cam-roller negative stiffness mechanism is proposed to study the effectiveness of negative stiffness on asymmetric spring supporting structures. Based on the physical model, the intrinsic geometrical nonlinearity of the isolator is analyzed and the differential equation of motion is derived by the generalized Lagrange's equation. Here, the multi-term incremental harmonic balance method (MT-IHBM) is employed and extended to capture both primary and subharmonic resonances in nonlinear response. By means of arc length increment, the adaptability and reliability of this method are enhanced under strong nonlinear vibration. Vibration transmissibility and frequency response relationships of various frequency components are demonstrated in order to better explain the properties of asymmetry vibration. The analysis results indicate that the performance of the isolation system is affected by different parametric excitation. Under some parameters, the introduction of negative stiffness will cause obvious 1/2 subharmonic resonance. The existence of the bias term in response makes the peak and frequency of resonances shift vertically and horizontally, respectively. Due to the asymmetry, the proposed HSLDS isolator does not present quasi-zero stiffness at the static equilibrium position, but it has superior ability to suppress vibration. Meanwhile, comparisons show that adding negative stiffness mechanism can still significantly improve the vibration isolation performance when a supporting structure has the characteristic of asymmetric stiffness. (C) 2019 Elsevier Ltd. All rights reserved.

Development and Analysis of Negative Stiffness Friction Damping Device

Development of a Negative Stiffness Friction Damping Device with an Amplification Mechanism

Study on the Damping Characteristic of Semi-Active Torsional Damper Based on Combined Positive and Negative Stiffness

Effect of Negative Stiffness Mechanism in a Vibration Isolator with Asymmetric and High-Static-low-dynamic Stiffness

A Half-Cycle Negative-Stiffness Damping Model and Device Development

A passive negative stiffness damper in series with a flexible support: Theoretical and experimental study

Development of A Double-Sliding Friction Damper (Dsfd)

Practical negative stiffness device with viscoelastic damper in parallel or series configuration for cable damping improvement

Enhance the energy dissipation ability of sleeve-type negative stiffness structures via a phase-difference mechanism

Finite Element Modeling of Nonlinear Active and Passive Dampers Applied to Vibration Controls

Frequency-dependency/independency analysis of damping magnification effect provided by tuned inerter absorber and negative stiffness amplifying damper considering soil-structure interaction

A self-recoverable negative stiffness metamaterial with enhanced bearing and energy dissipation capacity

A friction-strip hybrid damper with multi-phase energy dissipation mechanism: Cyclic test and numerical verification

Research on hierarchical cylindrical negative stiffness structures' energy absorption characteristics

Experimental investigation of a novel high performance multi-walled carbon nano-polyvinylpyrrolidone/silicon-based shear thickening fluid damper

Development of a Semi-Active Suspension Using a Compact Magnetorheological Damper with Negative-Stiffness Components

Shaking table test and control effect analysis of structure with negative stiffness damped outrigger

Stiffness and damping tuning through using a piezoelectric friction damper and a layered structure

3D FSI FEA SIMULATION AND ANALYSES OF THE DYNAMIC CHARACTERISTICS OF A DISPLACEMENT-SENSITIVE LIQUID DAMPER

Design and experiment of an innovative rotational two-level friction damper

Design, Manufacturing, and Testing of a Non‐Preload Variable Friction Damper for Seismic Application of Buildings