Abstract:Infrastructure development is crucial in densely populated countries like India, which leads to high demand for construction materials such as cement and aggregate. The production of these materials is energy-intensive and has adverse effects on the environment. Sustainable construction aims to reduce energy and resource usage while maintaining the strength and durability of the concrete. Using supplementary materials in concrete to replace cement and aggregate is essential. In this study, trial mixes were prepared to determine the optimal water-to-cement ratio based on fresh concrete properties like filling ability, passing ability, segregation resistance and viscosity. Cement was then partially replaced with fly ash (FA) at 10% up to 40% intervals. The FA mix was further optimized by replacing natural fine aggregate (NFA) with processed laterite fine aggregate (PLFA) at 10%, 20%, 30% and 40% to measure corrosion and bond strength properties. To conduct the testing, 150 mm cubes with centrally inserted 16 mm diameter High Yield Strength Deformed (HYSD) rebars were cast and cured in water diluted with 3.5% sodium chloride (NaCl) to maintain the marine environment for up to 120 days. Electrochemical tests were performed to measure corrosion properties, including Open Circuit Potential (OCP) and Tafel Plot Corrosion tests. As the corrosion tests are non-destructive, the same specimens were used for pull-out tests to measure the bond strength properties of the specimen.The experimental results indicate that adding FA to concrete improves its fresh properties. For further studies, 30% FA was selected based on its strength characteristics. Further examination was carried out by replacing NFA with PLFA at various percentages. The specimens containing 40% PLFA showed better corrosion resistance in terms of OCP values and corrosion rates after continuous exposure to a chloride environment. The bond strength values increase as the curing period increases. However, the bond strength of the 40% PLFA specimen decreased by 6.23% at 28 days and by 26.89% at 120 days of the curing period, compared to the 0% PLFA specimen with no laterite.

Investigations on Mechanical Characteristics and Microstructural Behavior of Laterized High Strength Concrete Mix

Performance Characteristics of Self-compacting Concrete Containing Lateritic Fine Aggregate as a Partial Replacement to Natural River Sand

Corrosion and Bond Strength Behaviour of Fly Ash-Based Lateritic Self-Compacting Concrete

Strength and Microstructure of Sustainable High Performance Concrete

Optimizing flow, strength, and durability in high-strength self-compacting and self-curing concrete utilizing lightweight aggregates

Execution of Internal Curing Method on Concrete using Pre-Soaked Light Weight Aggregate

Long-term strength and durability performance of eco-friendly concrete with supplementary cementitious materials

Influence of industrial waste and mineral admixtures on durability and sustainability of high-performance concrete

Performance of High-Strength Concrete with the Effects of Seashell Powder as Binder Replacement and Waste Glass Powder as Fine Aggregate

Influence of silica fume and metakaolin on durability properties of hybrid fibers reinforced high strength concrete

Evaluating the feasibility of blending fly ash and quarry dust in high-strength concrete to develop a sustainable concrete: A Study on the Mechanical and Durability Properties

Strength and Durability Studies on Hybrid Fiber Reinforced High-Performance Concrete for Silica Fume Based Mineral Admixture

Mechanical and Durability Properties of High Strength Concrete Incorporating Different Combinations of Supplementary Cementitious Materials: A Review

Mechanical and Micro-structural Properties of Ultra-High Strength Concrete: A Review

Effect of curing regimes on microstructural and strength characteristics of UHPC with ultra-fine fly ash and ultra-fine slag as a replacement for silica fume

Mechanical and microstructural properties of high-performance concrete made with rice husk ash internally cured with superabsorbent polymers

Concrete Mix Strength and Permeability with Various Supplementary Cementitious Materials

Durability and strength characteristics of high-strength concrete incorporated with volcanic pumice powder and polypropylene fibers

Strength and Permeability Evaluation of hybrid steel –basalt fibres reinforced concrete

High-Strength Self-Compacting Concrete Production Incorporating Supplementary Cementitious Materials: Experimental Evaluations and Machine Learning Modelling

Impact of M-Sand on Rheological, Mechanical, and Microstructural Properties of Self-Compacting Concrete