Abstract:This paper proposes a sensorless control strategy of permanent magnet synchronous motor (PMSM) based on two stage low pass filtering sliding mode observer (SMO). Due to the switching characteristics of sliding mode control, traditional SMO has inherent chattering problem, and traditional SMO has disadvantages such as poor observer accuracy and poor adaptive ability. To suppress the system chattering problem caused by SMO, a new continuous function is used to replace the discontinuous sign function as the switching function. To improve the adaptive ability of the system, the boundary layer thickness of the proposed switching function is designed as a variable. The boundary layer thickness varies with the distance from the sliding surface to the system state. This paper also proposes a two stage low pass filter (LPF) to filter the noise and harmonics in the estimated back EMF more effectively, so as to improve the observation accuracy. The cut-off frequency of the two stage LPF can vary adaptively with the motor speed. Therefore, the proposed two stage LPF can achieve effective filtering when the motor speed changes. The back EMF signal will produce phase delay after being filtered by two stage LPF. To offset the phase delay, a two stage variable phase delay compensation is designed for the two stage variable cut-off frequency LPF. The effectiveness and feasibility of the proposed method are verified by simulation and experiment. The results of the traditional SMO and the proposed SMO on the speed and rotor position observation under different working conditions are compared. The simulation and experimental results show that compared with the traditional SMO, the proposed SMO effectively improves the observation performance and robustness.

A Harmonic Compensation Method for SPMSM Sensorless Control Based on the Orthogonal Master-Slave Adaptive Notch Filter

An Enhanced Sensorless Control Scheme for PMSM Drives Considering Self-inductance Asymmetry

Analysis and Suppression of Rotor Eccentricity Effects on Fundamental Model Based Sensorless Control of Permanent Magnet Synchronous Machine

Adaptive Robust Sensorless Control for PMSM Based on Improved Back EMF Observer and Extended State Observer

Research on Sensorless Control Method of PMSM Based on an Adaptive Sliding Mode Observer

A Parameter Adaptive Feedforward Compensation Method for SPMSM Using Hall-Effect Sensor

PMSM Sensorless Control Based on Frequency Adaptive Complex Coefficient Filter

Harmonic Suppression For Low Speed Sensorless Control of SPMSM Based on High Voltage Frequency Pulsating Signal Injection

Adaptive Sensorless Control of High Speed Surface-Mounted PMSM Drives with Inductance Estimator Based on Current Error

An Adaptive Sliding Mode Observer for Sensorless Vector Control of Surface-Mounted Pmsm

Position Estimation Accuracy Improvement for SPMSM Sensorless Drives by Adaptive Complex-Coefficient Filter and DPLL

Sensorless Control of Surfaced-Mounted Permanent Magnet Synchronous Motor in a Wide-Speed Range

Sensorless control of permanent magnet synchronous motor based on two stage low pass filtering sliding mode observer

An Improved Position-Sensorless Control Method at Low Speed for PMSM Based on High-Frequency Signal Injection into a Rotating Reference Frame

Sensorless Control of Surface-Mount Permanent-Magnet Synchronous Motors Based on an Adaptive Super-Twisting Sliding Mode Observer

Sensorless Control of Permanent Magnet Synchronous Motor Based on Improved Model Reference Adaptive System

The Study of SRM Sensorless Control Strategy Based on SOGI-FLL and ADRC-PLL Hybrid Algorithm

Sensorless Control of Five-Phase Permanent-Magnet Synchronous Motor Based on Third-Harmonic Space

Two high performance position estimation schemes based on sliding-mode observer for sensorless SPMSM drives

PMSM Sensorless Control Based on Moving Horizon Estimation and Parameter Self-Adaptation

A Polar-Coordinate-Multi-Signal-Flux-Observer Based PMSM Non-PLL Sensorless Control