Optomechanical sensor can suppress quantum noise and simultaneously amplify the input signal

Aili McConnon

DOI: https://doi.org/10.1063/10.0004366

2021-04-16

Scilight

Abstract:Hybrid optomechanical system with an ensemble of ultracold atoms functions as an ultraprecesion quantum amplifer sensor

What problem does this paper attempt to address?

Quantum Sensing Proposal Using a Hybrid Optomechanical System

Jia-Yun Han,Yuan Zhou,Qing-Lan Wang,Dong-Yan Lu,Peng Xie,Xing-Chen Wang,Jing-Wei Wang,Guang-Hui Wang

DOI: https://doi.org/10.35848/1347-4065/ac92b2

IF: 1.5

2022-01-01

Japanese Journal of Applied Physics

Abstract:The optomechanical system has developed a significant breakthrough in quantum science, especially since it can further improve the precision and sensitivity of the measurement in the quantum region. Here, we study a feasible optomechanical proposal in a hybrid quantum system, which can ensure a quantum sensor with further enhanced sensitivity. With the joint assistance of microwave modifying and optical parametric amplification, the effective line width of this supermode is further reduced around the critical point, and it can therefore result in a resolvable spectrum to display a much weaker mechanical frequency shift, which is perhaps induced by a tiny mass or charged particles in this system. We also hope there might be some useful applications for this attempt in the area of quantum measurement.
Enhanced weak force sensing through atom-based coherent noise cancellation in a hybrid cavity optomechanical system

M. Mazaheri,Muhammad Asjad,Jiankang Peng,S. Singh

Abstract:We investigate weak force sensing based on coherent quantum noise cancellation in a nonlinear hybrid optomechanical system. The optomechanical cavity contains a moveable mechanical mirror, a fixed semitransparent mirror, an ensemble of ultracold atoms, and an optical parametric amplifier (OPA). Using the coherent quantum noise cancellation (CQNC) process, one can eliminate the back action noise at all frequencies. Also by tuning the OPA parameters, one can suppress the quantum shot-noise at lower frequencies than the resonant frequency. In the CQNC scheme, the damping rate of the mechanical oscillator matches the damping rate of the atomic ensemble, which is experimentally achievable even for a low-frequency mechanical oscillator with a high-quality factor. Elimination of the back action noise and suppression of the shot noise significantly enhance force sensing and thus overcome the standard quantum limit of weak force sensing. This hybrid scheme can play an essential role in the realization of quantum optomechanical sensors and quantum control.

Physics,Engineering
Quantum hybrid optomechanical inertial sensing

Logan Richardson,Adam Hines,Andrew Schaffer,Brian P. Anderson,Felipe Guzman

DOI: https://doi.org/10.1364/AO.393060

2020-05-18

Abstract:We discuss the design of quantum hybrid inertial sensor that combines an optomechanical inertial sensor with the retro-reflector of a cold atom interferometer. This sensor fusion approach provides absolute and high accuracy measurements with cold atom interferometers, while utilizing the optomechanical inertial sensor at frequencies above the repetition rate of the atom interferometer. This improves the overall measurement bandwidth as well as the robustness and field deployment capabilities of these systems. We evaluate which parameters yield an optimal acceleration sensitivity, from which we anticipate a noise floor at nano-g levels from DC to 1 kHz.

Quantum Physics,Atomic Physics,Instrumentation and Detectors,Optics
Homodyne coherent quantum noise cancellation in a hybrid optomechanical force sensor

H. Allahverdi,Ali Motazedifard,A. Dalafi,D. Vitali,M. H. Naderi

DOI: https://doi.org/10.1103/PhysRevA.106.023107

2022-08-12

Abstract:In this paper we propose an experimentally viable scheme to enhance the sensitivity of force detection in a hybrid optomechanical setup assisted by squeezed vacuum injection, beyond the standard quantum limit (SQL). The scheme is based on a combination of the coherent quantum noise cancellation (CQNC) strategy with a variational homodyne detection of the cavity output spectrum in which the phase of the local oscillator is optimized. In CQNC, realizing a negative-mass oscillator in the system leads to exact cancellation of the backaction noise from the mechanics due to destructive quantum interference. Squeezed vacuum injection enhances this cancellation and allows sub-SQL sensitivity to be reached in a wide frequency band and at much lower input laser powers. We show here that the adoption of variational homodyne readout enables us to enhance this noise cancellation up to 40dB compared to the standard case of detection of the optical output phase quadrature, leading to a remarkable force sensitivity of the order of 10−19N/Hz , about 70% enhancement compared to the standard case. Moreover, we show that at nonzero cavity detuning, the signal response can be amplified at a level three to five times larger than that in the standard case without variational homodyne readout, improving the signal-to-noise ratio. Finally, the variational readout CQNC developed in this paper may be applied to other optomechanical-like platforms such as levitated systems and multimode optomechanical arrays or crystals as well as Josephson-based optomechanical systems. https://doi.org/10.1103/PhysRevA.106.023107 ©2022 American Physical Society
Enhanced weak force sensing based on atom-based coherent quantum noise cancellation in a hybrid cavity optomechanical system

S. K. Singh,M. Mazaheri,Jia-Xin Peng,A. Sohail,Mohammad Khalid,M. Asjad

DOI: https://doi.org/10.3389/fphy.2023.1142452

IF: 3.718

2023-04-08

Frontiers in Physics

Abstract:The weak force sensing based on a coherent quantum noise cancellation (CQNC) scheme is presented in a hybrid cavity optomechanical system containing a trapped ensemble of ultracold atoms and an optical parametric amplifier (OPA). In the proposed system, the back-action noise can be completely eliminated at all frequencies and through the proper choice of the OPA parameters, and the noise spectral density can also be reduced at lower frequencies. This leads to a significant enhancement in the sensitivity of the cavity optomechanical weak force sensor, and the noise spectral density also surpasses the standard quantum limit (SQL) even for the small input power at the lower detection frequency. Furthermore, the experimental feasibility of this scheme is also briefly discussed. This study can be used for the realization of a force sensor based on hybrid cavity optomechanical systems and for the coherent quantum control in macroscopic systems.

physics, multidisciplinary
Force sensing based on coherent quantum noise cancellation in a hybrid optomechanical cavity with squeezed-vacuum injection

Ali Motazedifard,F. Bemani,M. H. Naderi,R. Roknizadeh,D. Vitali

DOI: https://doi.org/10.1088/1367-2630/18/7/073040

2016-06-09

Abstract:We propose and analyse a feasible experimental scheme for a quantum force sensor based on the elimination of back-action noise through coherent quantum noise cancellation (CQNC) in a hybrid atom-cavity optomechanical setup assisted with squeezed vacuum injection. The force detector, which allows for a continuous, broad-band detection of weak forces well below the standard quantum limit (SQL), is formed by a single optical cavity simultaneously coupled to a mechanical oscillator and to an ensemble of ultracold atoms. The latter acts as a negative-mass oscillator so that atomic noise cancels exactly the back-action noise from the mechanical oscillator due to destructive quantum interference. Squeezed vacuum injection enforces this cancellation and allows to reach sub-SQL sensitivity in a very wide frequency band, and at much lower input laser powers.

Quantum Physics
Coherent Quantum-Noise Cancellation for Optomechanical Sensors

Mankei Tsang,Carlton M. Caves

DOI: https://doi.org/10.1103/physrevlett.105.123601

IF: 8.6

2010-09-13

Physical Review Letters

Abstract:Using a flow chart representation of quantum optomechanical dynamics, we design coherent quantum-noise-cancellation schemes that can eliminate the backaction noise induced by radiation pressure at all frequencies and thus overcome the standard quantum limit of force sensing. The proposed schemes can be regarded as novel examples of coherent feedforward quantum control.

physics, multidisciplinary
Optical read-out of the quantum motion of an array of atoms-based mechanical oscillators

Thierry Botter,Daniel W. C. Brooks,Sydney Schreppler,Nathan Brahms,Dan M. Stamper-Kurn

DOI: https://doi.org/10.48550/arXiv.1210.5218

2012-10-19

Abstract:We create an ultracold-atoms-based cavity optomechanical system in which as many as six distinguishable mechanical oscillators are prepared, and optically detected, near their ground states of motion. We demonstrate that the motional state of one oscillator can be selectively addressed while preserving neighboring oscillators near their ground states to better than 95% per excitation quantum. We also show that our system offers nanometer-scale spatial resolution of each mechanical element via optomechanical imaging. This technique enables in-situ, parallel sensing of potential landscapes, a capability relevant to active research areas of atomic physics and force-field detection in optomechanics.

Quantum Physics,Atomic Physics,Optics
Hybrid optomechanical cooling by atomic $Λ$ systems

F. Bariani,S. Singh,L.F. Buchmann,M. Vengalattore,P. Meystre

DOI: https://doi.org/10.1103/PhysRevA.90.033838

2014-07-04

Abstract:We investigate a hybrid quantum system consisting of a cavity optomechanical device optically coupled to an ultracold quantum gas. We show that the dispersive properties of the ultracold gas can be used to dramatically modify the optomechanical response of the mechanical resonator. We examine hybrid schemes wherein the mechanical resonator is coupled either to the motional or the spin degrees of freedom of the ultracold gas. In either case, we find an enhancement of more than two orders of magnitude in optomechanical cooling due to this hybrid interaction. Significantly, based on demonstrated parameters for the cavity optomechanical device, we identify regimes that enable the ground state cooling of the resonator from room temperature. In addition, the hybrid system considered here represents a powerful interface for the use of an ultracold quantum gas for state preparation, sensing and quantum manipulation of a mesoscopic mechanical resonator.

Quantum Physics,Atomic Physics,Optics
All-optical coherent quantum-noise cancellation in cascaded optomechanical systems

Jakob Schweer,Daniel Steinmeyer,Klemens Hammerer,Michèle Heurs

DOI: https://doi.org/10.1103/PhysRevA.106.033520

2022-10-13

Abstract:Coherent quantum noise cancellation (CQNC) can be used in optomechanical sensors to surpass the standard quantum limit (SQL). In this paper, we investigate an optomechanical force sensor that uses the CQNC strategy by cascading the optomechanical system with an all-optical effective negative mass oscillator. Specifically, we analyze matching conditions, losses and compare the two possible arrangements in which either the optomechanical or the negative mass system couples first to light. While both of these orderings yield a sub-SQL performance, we find that placing the effective negative mass oscillator before the optomechanical sensor will always be advantageous for realistic parameters. The modular design of the cascaded scheme allows for better control of the sub-systems by avoiding undesirable coupling between system components, while maintaining similar performance to the integrated configuration proposed earlier. We conclude our work with a case study of a micro-optomechanical implementation.

Quantum Physics
Quantum Noise Limit in Optomechanical Force Measurement

Yang Gao,Ho‐Pui Ho,Haixi Zhang

2016-01-01

Abstract:We prove that the force sensitivity of the conventional optomechanical detector associated with the optical quadrature measurement of the output beam is lower bounded by the so-called ultimate quantum limit (UQL), i.e., the absolute value of the imaginary part of the inverse mechanical susceptibility. Through the linear response theory, we find that the force sensitivity of any linear detector is lower bounded by a generalized UQL, which might beat the usual UQL by properly tailoring the detector-oscillator interaction. We believe that our results open a new direction for improving the performance of high-sensitivity detection schemes.
Force sensing in hybrid Bose-Einstein condensate optomechanics based on parametric amplification

Ali Motazedifard,A. Dalafi,F. Bemani,M. H. Naderi

DOI: https://doi.org/10.1103/PhysRevA.100.023815

2019-07-18

Abstract:In this paper, the scheme of a force sensor is proposed which has been composed of a hybrid optomechanical cavity containing an interacting cigar-shaped Bose-Einstein condensate (BEC) where the \textit{s}-wave scattering frequency of the BEC atoms as well as the spring coefficient of the cavity moving end-mirror (the mechanical oscillator) are parametrically modulated. It is shown that in the red-detuned regime and under the so-called impedance-matching condition, the mechanical response of the system to the input signal is enhanced substantially, which leads to the amplification of the weak input signal while the added noises of measurement (backaction noises) can be suppressed and lowered much below the standard quantum limit (SQL). In this way, such a hybrid system operates as an ultra-sensitive force sensor which can amplify the input signal and simultaneously suppress the added noises by controlling the amplitudes of modulation and the system cooperativities. The advantage of the presented nonlinear hybrid system accompanied with the mechanical and atomic modulations in comparison to the bare optomechanical cavities is the enhancement of signal amplification as well as the extension of amplification bandwidth.

Quantum Physics
Optomechanically Enhanced Precision Measurement

An-Ning Xu,Yong-Chun Liu

DOI: https://doi.org/10.1103/physreva.106.013506

IF: 2.971

2022-01-01

Physical Review A

Abstract:Cavity optomechanical systems provide excellent platforms for the high-precision measurement of various physical quantities. Here, we investigate the improvement of optomechanical precision measurements based on the tuning of the optomechanical interaction, which can surpass the quantum shot-noise limit without using a squeezed light source. The enhanced performance comes from the optomechanical two-mode squeezing interaction. The approach is based on the tuning of the mechanical susceptibility using optical force, which can be adjusted by controlling the laser frequency and power. For proper blue-detuned laser driving, the mechanical response to the detected signal is greatly enhanced, with improved measurement sensitivity surpassing the shot-noise limit. Moreover, for proper red-detuned laser driving, the working bandwidth can be broadened when the quantum shot noise does not dominate. Our work opens an avenue towards significant improvement to all kinds of optomechanical precision-measurement systems without stringent requirements.
Overcoming the Standard Quantum Limit with Electro-Optomechanical Hybrid System for Enhanced Force Sensing

Alolika Roy,Amarendra K. Sarma

2024-09-17

Abstract:We investigate the reduction of measurement-added noise in force sensing by analyzing its power spectral density (PSD) within a hybrid optomechanical system. The setup comprises of an optomechanical cavity equipped with a movable mirror which acts as the mechanical oscillator, a stationary semi-transparent mirror, a superconducting qubit, and an optical parametric amplifier (OPA). By utilizing the concept of coherent quantum noise cancellation (CQNC), we derive the conditions necessary for complete cancellation of back-action force, thereby enhancing force sensitivity. Furthermore, with the gradual increase in the OPA pump gains, we suppress the sensitivity beyond the standard quantum limit (SQL) at a lower value of laser power. The removal of back-action noise, along with the reduction of shot noise, improves force detection capabilities, thereby surpassing the standard quantum limit associated with weak force detection.

Quantum Physics
Entanglement-Enhanced Optomechanical Sensing

Yi Xia,Aman R. Agrawal,Christian M. Pluchar,Anthony J. Brady,Zhen Liu,Quntao Zhuang,Dalziel J. Wilson,Zheshen Zhang

DOI: https://doi.org/10.1038/s41566-023-01178-0

2022-10-28

Abstract:Optomechanical systems have been exploited in ultrasensitive measurements of force, acceleration, and magnetic fields. The fundamental limits for optomechanical sensing have been extensively studied and now well understood -- the intrinsic uncertainties of the bosonic optical and mechanical modes, together with the backaction noise arising from the interactions between the two, dictate the Standard Quantum Limit (SQL). Advanced techniques based on nonclassical probes, in-situ pondermotive squeezed light, and backaction-evading measurements have been developed to overcome the SQL for individual optomechanical sensors. An alternative, conceptually simpler approach to enhance optomechanical sensing rests upon joint measurements taken by multiple sensors. In this configuration, a pathway toward overcoming the fundamental limits in joint measurements has not been explored. Here, we demonstrate that joint force measurements taken with entangled probes on multiple optomechanical sensors can improve the bandwidth in the thermal-noise-dominant regime or the sensitivity in shot-noise-dominant regime. Moreover, we quantify the overall performance of entangled probes with the sensitivity-bandwidth product and observe a 25% increase compared to that of the classical probes. The demonstrated entanglement-enhanced optomechanical sensing could enable new capabilities for inertial navigation, acoustic imaging, and searches for new physics.

Quantum Physics,Optics
Enhanced quantum sensing with amplification and deamplification

Min Jiang,Yushu Qin,Yuanhong Wang,Ying Huang,Xinhua Peng,Dmitry Budker

2023-09-01

Abstract:Quantum sensing is a fundamental building block of modern technology that employs quantum resources and creates new opportunities for precision measurements. However, previous methods usually have a common assumption that detection noise levels should be below the intrinsic sensitivity provided by quantum resources. Here we report the first demonstration of Fano resonance between coupled alkali-metal and noble gases through rapid spin-exchange collisions. The Fano resonance gives rise to two intriguing phenomena: spin amplification and deamplification, which serve as crucial resources for enhanced sensing. Further we develop a novel scheme of quantum sensing enhanced by amplification and deamplification, with relaxed requirements on the detection noise. The coupled systems of alkali-metal and noble gases act as amplifiers or de-amplifiers, enabling to extract small signals above the detection noise before final detection. We demonstrate magnetic-field measurement about 54 decibels below the photon-shot noise, which outperforms the state-of-the-art squeezed-light technology and realizes femtotesla-level sensitivity. Our work opens new avenues to applications in searches for ultralight dark matter with sensitivity well beyond the supernova-observation constraints.

Quantum Physics
Excess optical quantum noise in atomic sensors

Irina Novikova,Eugeniy E. Mikhailov,Yanhong Xiao

DOI: https://doi.org/10.1103/PhysRevA.91.051804

2014-10-15

Abstract:Enhanced nonlinear optical response of a coherent atomic medium is the basis for many atomic sensors, and their performance is ultimately limited by the quantum fluctuations of the optical read-out. Here we demonstrate that off-resonant interactions can significantly modify the quantum noise of the optical field, even when their effect on the mean signal is negligible. We illustrate this concept by using an atomic magnetometer based on the nonlinear Faraday effect: the rotation of the light polarization is mainly determined by the resonant light-induced spin alignment, which alone does not change the photon statistics of the optical probe. Yet, we found that the minimum noise of output polarization rotation measurements is above the expected shot noise limit. This excess quantum noise is due to off-resonant coupling and grows with atomic density. We also show that the detection scheme can be modified to reduce the measured quantum noise (even below the shot-noise limit) but only at the expense of the reduced rotational sensitivity. These results show the existence of previously unnoticed factors in fundamental limitations in atomic magnetometry and could have impacts in many other atom-light based precision measurements.

Quantum Physics
A hybrid on-chip opto-nanomechanical transducer for ultra-sensitive force measurements

Emanuel Gavartin,Pierre Verlot,Tobias J. Kippenberg

DOI: https://doi.org/10.1038/nnano.2012.97

2011-12-05

Abstract:Nanomechanical oscillators have been employed as transducers to measure force, mass and charge with high sensitivity. They are also used in opto- or electromechanical experiments with the goal of quantum control and phenomena of mechanical systems. Here, we report the realization and operation of a hybrid monolithically integrated transducer system consisting of a high-$Q$ nanomechanical oscillator with modes in the MHz regime coupled to the near-field of a high-$Q$ optical whispering-gallery-mode microresonator. The transducer system enables a sensitive resolution of the nanomechanical beam's thermal motion with a signal-to-noise of five orders of magnitude and has a force sensitivity of $74\,\rm{aN}\,\rm{Hz}^{-1/2}$ at room temperature. We show, both theoretically and experimentally, that the sensitivity of continuous incoherent force detection improves only with the fourth root of the averaging time. Using dissipative feedback based on radiation pressure enabled control, we explicitly demonstrate by detecting a weak incoherent force that this constraint can be significantly relaxed. We achieve a more than 30-fold reduction in averaging time with our hybrid transducer and are able to detect an incoherent force having a force spectral density as small as $15\,\rm{aN}\,\rm{Hz}^{-1/2}$ within $35\,\rm{s}$ of averaging. This corresponds to a signal which is 25 times smaller than the thermal noise and would otherwise remain out of reach. The reported monolithic platform is an enabling step towards hybrid nanomechanical transducers relying on the light-mechanics interface.

Optics
Strong single-photon optomechanical coupling in a hybrid quantum system

Jiaojiao Chen,Zhuanxia Li,Xiao-Qing Luo,Wei Xiong,Mingfeng Wang,Hai-Chao Li

DOI: https://doi.org/10.1364/OE.438114

IF: 3.8

2021-01-01

Optics Express

Abstract:Engineering strong single-photon optomechanical couplings is crucial for optomechanical systems. Here, we propose a hybrid quantum system consisting of a nanobeam (phonons) coupled to a spin ensemble and a cavity (photons) to overcome it. Utilizing the critical property of the lower-branch polariton (LBP) formed by the ensemble-phonon interaction, the LBP-cavity coupling can be greatly enhanced by three orders magnitude of the original one, while the upper-branch polariton (UBP)-cavity coupling is fully suppressed. Our proposal breaks through the condition of the coupling strength less than the critical value in previous schemes using two harmonic oscillators. Also, strong Kerr effect can be induced in our proposal. This shows our proposed approach can be used to study quantum nonlinear and nonclassical effects in weakly coupled optomechanical systems. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Beating the standard quantum limit for force sensing with a coupled two-mode optomechanical system

Xunnong Xu,Jacob M. Taylor

DOI: https://doi.org/10.48550/arXiv.1303.7469

2013-03-29

Quantum Physics

Abstract:Optomechanics allows the transduction of weak forces to optical fields, with many efforts approaching the standard quantum limit. We consider force-sensing using a mirror-in-the-middle setup and use two coupled cavity modes originated from normal mode splitting for separating pump and probe fields. We find that this two-mode model can be reduced to an effective single-mode model, if we drive the pump mode strongly and detect the signal from the weak probe mode. The optimal force detection sensitivity at zero frequency (DC) is calculated and we show that one can beat the standard quantum limit by driving the cavity close to instability. The best sensitivity achievable is limited by mechanical thermal noise and by optical losses. We also find that the bandwidth where optimal sensitivity is maintained is proportional to the cavity damping in the resolved sideband regime. Finally, the squeezing spectrum of the output signal is calculated, and it shows almost perfect squeezing at DC is possible by using a high quality factor and low thermal phonon-number mechanical oscillator.

Optomechanical sensor can suppress quantum noise and simultaneously amplify the input signal

Quantum Sensing Proposal Using a Hybrid Optomechanical System

Enhanced weak force sensing through atom-based coherent noise cancellation in a hybrid cavity optomechanical system

Quantum hybrid optomechanical inertial sensing

Homodyne coherent quantum noise cancellation in a hybrid optomechanical force sensor

Enhanced weak force sensing based on atom-based coherent quantum noise cancellation in a hybrid cavity optomechanical system

Force sensing based on coherent quantum noise cancellation in a hybrid optomechanical cavity with squeezed-vacuum injection

Coherent Quantum-Noise Cancellation for Optomechanical Sensors

Optical read-out of the quantum motion of an array of atoms-based mechanical oscillators

Hybrid optomechanical cooling by atomic $Λ$ systems

All-optical coherent quantum-noise cancellation in cascaded optomechanical systems

Quantum Noise Limit in Optomechanical Force Measurement

Force sensing in hybrid Bose-Einstein condensate optomechanics based on parametric amplification

Optomechanically Enhanced Precision Measurement

Overcoming the Standard Quantum Limit with Electro-Optomechanical Hybrid System for Enhanced Force Sensing

Entanglement-Enhanced Optomechanical Sensing

Enhanced quantum sensing with amplification and deamplification

Excess optical quantum noise in atomic sensors

A hybrid on-chip opto-nanomechanical transducer for ultra-sensitive force measurements

Strong single-photon optomechanical coupling in a hybrid quantum system

Beating the standard quantum limit for force sensing with a coupled two-mode optomechanical system