Abstract:To prepare BM‐TA‐GQD hydrophilic nanoparticles, BM‐TA NPs were functionalized with GQD. Polymeric membranes have garnered great interest in wastewater treatment; however, fouling is known as their main limitation. Therefore, the blending of hydrophilic nanoparticles in polymeric membranes' structure is a promising approach for fouling reduction. Herein, a hydrophilic boehmite–tannic acid–graphene quantum dot (BM‐TA‐GQD) nanoparticle was synthesized and blended in a polyethersulfone polymeric membrane in different percentages. The fabricated membranes were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM) images, water contact angle, porosity measurement, and antibacterial and antifouling properties. Surface SEM images of the modified membranes showed good dispersion of nanoparticles up to 0.5 wt%, which resulted in hydrophilicity and pure water flux enhancement. Based on AFM images, the mean roughness (Sa) of the fabricated membranes decreased from 2.07 to 0.84 nm for the bare and optimum membranes, respectively. In terms of performance, increasing the nanoparticle percentages up to 0.5 wt% resulted in the flux recovery ratio developing from 44.58% for the bare membrane to 71.35% for the 0.5 wt% BM‐TA‐GQD/PES membrane (optimum membrane). The antibacterial property of fabricated membranes was studied against biologically treated soft drink industrial wastewater (BTSDIW) as a bacterial source. The results showed that the turbidity of solutions containing permeated wastewater from the modified membranes (0.1, 0.5, and 1 wt% of BM‐TA‐GQD) was lower than that obtained from the unmodified membrane. These results confirmed the antibacterial properties of fabricated membranes. Finally, the optimal membrane (0.5 wt% BM‐TA‐GQD) was examined for post‐treatment of the BTSDIW. An effluent COD of 13 mg/L and turbidity of 2 NTU showed a successful performance of the filtration process. Practitioner Points Ultrafiltration PES membranes were modified by different loadings of BM‐TA‐GQD. Hydrophilicity improvement was achieved by adding BM‐TA‐GQD nanoparticles. Expansion of size and number of macro‐voids in modified membranes was confirmed. Membrane roughness was reduced in the BM‐TA‐GQD blended membranes. The optimum membrane was efficient in COD and turbidity removal.

Pharmaceutical wastewater treatment using polypropylene membranes incorporated with carboxylated and PEG‐grafted nanodiamond in membrane bioreactor (MBR)

PVDF membranes embedded with PVP functionalized nanodiamond for pharmaceutical wastewater treatment

Impact of Graphitic Carbon Nitride/polydopamine on Permeance and Antifouling Performance of Reverse Osmosis Membranes

Improved Antifouling Properties of Polyvinyl Chloride Blend Membranes by Novel Phosphate Based-Zwitterionic Polymer Additive

Improving the Performance of Polyamide Reverse Osmosis Membrane by Incorporation of Modified Multi-Walled Carbon Nanotubes

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

A nano-Al2O3 modified polypropylene hollow fiber membrane with enhanced biofilm formation in membrane aerated biofilm reactor application

Preparation, characterization, and fouling analysis of PVC/ND-PEG ultrafiltration membranes for whey separation

Developing PVDF Hollow Fiber Membrane Enhanced by Braided Tube and Modified by Bionic Coating for Treating Aldehyde-Containing Wastewater

Enhanced MPBR with Polyvinylpyrrolidone-Graphene Oxide/pvdf Hollow Fiber Membrane for Efficient Ammonia Nitrogen Wastewater Treatment and High-Density Chlorella Cultivation

Highly antifouling polymer-nanoparticle-nanoparticle/polymer hybrid membranes

Surface modification of polypropylene microporous membranes to improve their antifouling property in MBR: NH3 plasma treatment

Surface modification of polypropylene microporous membrane to improve its antifouling property in MBR: CO2 plasma treatment

Interface Engineering of Microporous Polypropylene Membranes for Polyamide Thin-Film Composite Nanofiltration Membranes with Robust Structure and Superior Performance

Polydopamine/ polyethyleneimine/ MOF ternary-coated poly (vinyl chloride) nanocomposite membranes based on green solvent for shale gas wastewater treatment

Enhancing Membrane Surface Antifouling by Implanting Amphiphilic Polymer Brushes Using a Swelling Induced Entrapment Technique.

Analysis of antifouling behavior of high dispersible hydrophilic poly(ethylene glycol)/vinyl functionalized SiO2 nanoparticles embedded polyethylene membrane

Surface Hydrophilization of Microporous Polypropylene Membrane by Grafting Zwitterionic Polymer for Anti-Biofouling

Post‐treatment of soft drink industrial wastewater using a new antibacterial ultra‐filtration membrane prepared of Polyethersulfone blended with boehmite–tannic acid–graphene quantum dot

Antifouling and Self-Cleaning Performances of the Porous Polypropylene Membrane Surface Grafted by P(NIPAAm-PEGMA)

Improving physico-chemical properties and antifouling of nanofiltration membranes using coating DLC nanostructures