Abstract:The encapsulation of active components is currently used as common methodology for the insertion of additional functions like self-healing properties on a polymeric matrix. Among the different approaches, polyurea microcapsules are used in different applications. The design of polyurea microcapsules (MCs) containing active diisocyanate compounds, namely isophorone diisocyanate (IPDI) or hexamethylene diisocyanate (HDI), is explored in the present work. The polyurea shell of MCs is formed through the interfacial polymerization of oil-in-water emulsions between the highly active methylene diphenyl diisocyanate (MDI) and diethylenetriamine (DETA), while the cores of MCs contain, apart from IPDI or HDI, a liquid Novolac resin. The hydroxyl functionalities of the resin were either unprotected (Novolac resin), partially protected (Benzyl Novolac resin) or fully protected (Acetyl Novolac resin). It has been found that the formation of MCs is controlled by the MDI/DETA ratio, while the shape and size of MCs depends on the homogenization rate applied for emulsification. The encapsulated active compound, as determined through the titration of isocyanate (NCO) groups, was found to decrease with the hydroxyl functionality content of the Novolac resin used, indicating a reaction between NCO and the hydroxyl groups. Through the thorough investigation of the organic phase, the rapid reaction (within a few minutes) of MDI with the unprotected Novolac resin was revealed, while a gradual decrease in the NCO groups (within two months) has been observed through the evolution of the Attenuated Total Reflectance—Fourier-Transform Infrared (ATR-FTIR) spectroscopy and titration, due to the reaction of these groups with the hydroxyl functionalities of unprotected and partially protected Novolac resin. Over longer times (above two months), the reaction of the remaining NCO groups with humidity was evidenced, especially when the fully protected Acetyl Novolac resin was used. HDI was found to be more susceptible to reactions, as compared with IPDI.

Optimization of a microfluidic process to encapsulate isocyanate for autoreactive and ecological adhesives

Emulsion Stabilization Strategies for Tailored Isocyanate Microcapsules

Isophorone Diisocyanate (IPDI) Microencapsulation for Mono-Component Adhesives: Effect of the Active H and NCO Sources

Controlling the Synthesis of Polyurea Microcapsules and the Encapsulation of Active Diisocyanate Compounds

Synthesis of polymeric isocyanate microcapsules via interfacial polymerization and their characterisation using spectroscopy and microscopy techniques

Biodegradable Microcapsules of Poly(Butylene Adipate- co-Terephthalate) (PBAT) as Isocyanate Carriers and the Effect of the Process Parameters

Preparation of isocyanate microcapsules by interfacial polymerization/in-situ polymerization and their application in wood adhesives

Monitoring reactive microencapsulation dynamics using microfluidics

Microcapsules of Poly(butylene adipate- co-terephthalate) (PBAT) Loaded with Aliphatic Isocyanates for Adhesive Applications

Rapid and Efficient Synthesis of Isocyanate Microcapsules Via Thiol-Ene Photopolymerization in Pickering Emulsion and Its Application in Self-Healing Coating

Synthesis, characterization and qualitative assessment of self-healing capacity of PU microcapsules containing TDI and IPDI as a core agent

Versatile fabrication of nanocomposite microcapsules with controlled shell thickness and low permeability

Carbamate Thermal Decarboxylation for the Design of Non-Isocyanate Polyurethane Foams

Controllable Fabrication and Oil–Water Separation Properties of Polyethylene Terephthaloyl-Ethylenediamine-IPN-poly(N-Isopropylacrylamide) Microcapsules

Optimization of synthesis parameters of PUF/ENB microcapsules for self‐healing applications using factorial design methodology

Preparation of Isocyanate Microcapsules As a High-Performance Adhesive for PLA/WF

Microcapsules containing multi-functional reactive isocyanate-terminated polyurethane prepolymer as a healing agent. Part 1: synthesis and optimization of reaction conditions

Hybrid shell microcapsules containing isophorone diisocyanate with high thermal and chemical stability for autonomous self‐healing of epoxy coatings

Environmental assessment of an innovative adhesive for the footwear industry: road map for product development

Designing Polyurethane-based Microcapsule with Tailored Swelling Behaviours for Enhanced Oil Recovery

Preparation and Self-Healing Application of Isocyanate Prepolymer Microcapsules