Abstract:Purpose In this article, the authors intended to analyze the shielding properties of a fabric frequency selective surface (FSS) structure to the basis of substrate fabric properties. For this purpose, the effect of the properties and structural parameters of the substrate fabric layer were analyzed on the shielding properties of the developed FSS. Design/methodology/approach The experimental and theoretical evaluations were done at the frequency band of 1,805–1,880 MHz and computer simulation technology (CST) was used in modeling. In experiments were developed the FSS structures by different fabrics as the substrate layers and the copper as the patch cells. The shielding properties of these samples were measured experimentally by the developed setup. Findings Confirming resonant frequencies, transmission coefficients, and the bandwidths results obtained from modeling and experiments show that the thickness, weight and interweaving structure parameters were affect the porosity of the substrate fabric. Porosity of the fabric moves the resonant frequency due to the changing of the dielectric properties of the fabric. Therefore, shielding properties of the FSS structure were affected by these parameters as the important characteristics of the substrate fabric. In addition, shielding properties of the samples (resonant frequencies and transmission coefficients) in different incident angles are not same in two modes of transverse electric and transfer magnetic. Originality/value The experimental results suggest that the introduced flexible FSS structures are suitable for shielding applications in the proposed frequency band.

Analyzing the effect of the structural parameters of the fabric substrate layer on the textile FSS shielding properties

Influence of Flexible and Textile Substrates on Frequency-Selective Surfaces (FSS)

Accurate Characterization. of Shielding Effectiveness of Metallic Enclosures with Thin Wires and Thin Slots

Electromagnetic shielding behaviors of planar frequency selective surface fabrics, with emphasis on decoupling analysis, lamination direction and tunable selective frequency

Shielding Effectiveness Characterization Of Metallic Enclosures With A Thin-Sheet Panel Illuminated By A Arbitrary Polarizations High-Power Emp

Study on the Electromagnetic Properties of Frequency Selective Surface Absorber

Design of a Dual-Band Electromagnetic Absorber with Frequency Selective Surfaces

Improving the S-band Performance of the Microwave Absorbing Material Utilizing Frequency Selective Surface

FDTD computation of shielding effectiveness of electromagnetic shielding fabric based on weave region

Equivalent Circuit Modeling of a Transmission Mode FSS Structure with Anisotropic Substrate and Enhanced Parameters

Thin and Broadband Electromagnetic Absorber Design Using Resistors and Capacitors Loaded Frequency Selective Surface

Research Progress and Application Prospects of Active Frequency Selective Surfaces

A Trifunctional Active Frequency Selective Surface for 6G Shielding Applications

Study on Principle of the Shielding Effectiveness of Woven Fabrics Containing Stainless Steel Fibers and Simulation

Tailoring Electromagnetic Interference Shielding Performance of Conductive Nanocomposite Coating Using Textile Substrates

Fabrication of the double-layer millimeter wave frequency selective surface by femtosecond laser

A new study on the influencing factors and mechanism of shielding effectiveness of woven fabrics containing stainless steel fibers

A Review of Electromagnetic Shielding Fabric, Wave-Absorbing Fabric and Wave-Transparent Fabric

Electromagnetic Interference Shielding of Metal Coated Ultrathin Nonwoven Fabrics and Their Factorial Design

Comparative analysis of X‐band FSS fabricated by inkjet printing and conventional etching technique

A Monolayer Frequency‐Selective Surface for Wideband Shielding Application with Adequate Out‐of‐Band Separation and Angular Stability