Factors affecting the lower limit of the safe mud weight window for drilling operation in hydrate-bearing sediments in the Northern South China Sea

Qingchao Li,Jingjuan Wu

DOI: https://doi.org/10.1007/s40948-022-00396-0

2022-04-01

Abstract:Maintaining wellbore stability is the basis and prerequisite for efficient methane production from offshore gas hydrates. Nevertheless, owing to the invasion and disturbance by drilling mud, gas hydrates around wellbore gradually dissociate, resulting in the rapid reduction of sediment strength, thereby the borehole collapse. Accurate design of mud density based on appropriate strength criterion is a feasible measure to avoid this case, but the traditional Mohr–Coulomb (MC) criterion was commonly used now. Herein, the self-designed low temperature triaxial experimental equipment was set up to explore the strength of sediment with different saturation of hydrate, and a new strength criterion was developed. Moreover, impact law and mechanism of several critical factors on the lower limit of the safe mud weight window (abbreviated as MDlow value) was then investigated. The investigation results showed that the MDlow value calculated by the new criterion is higher (or more conservative), which is more conducive for prevention of borehole collapse. Further analysis reveals that the increase of cohesion or hydrate saturation enhances the reservoir strength, resulting in the smaller MDlow value. In this way, the wider window is more conducive to reasonable mud density design. Furthermore, the safe mud weight window for hydrate reservoir is temperature sensitive, and it varies obviously when the drilling fluid temperature is between 288.14 K and 288.45 K. Finally, the investigation in this study also shows that the MDlow value was still affected by stress difference. The preferred design strategy is to orient the azimuth of wellbore axis at 90° if horizontal wellbore is drilled for hydrate development.

energy & fuels,geosciences, multidisciplinary,engineering, geological