Recent progress of MOF-derived porous carbon materials for microwave absorption

Mingliang Ma,Yuxin Bi,Zhouyu Tong,Yanyan Liu,Ping Lyu,Rongzhen Wang,Yong Ma,Guanglei Wu,Zijian Liao,Yan Chen

DOI: https://doi.org/10.1039/d1ra01880a

IF: 4.036

2021-01-01

RSC Advances

Abstract:MOF-derived PC materials with unique characteristic have been widely concerned as microwave absorbers over the years.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Research Progress of Metal Organic Frameworks/Carbon‐Based Composites for Microwave Absorption

Wendong Yang,Qianqi Zhao,Yao Zhou,Zhilong Cui,Yuanjun Liu

DOI: https://doi.org/10.1002/adem.202100964

IF: 3.6

2021-10-16

Advanced Engineering Materials

Abstract:Metal organic frameworks (MOFs) materials can be directly carbonized or combined with other materials to obtain porous carbons or composites loaded with metal/metal oxide and doped with non-metals such as N, P, and B. The addition of dielectric metal oxide, magnetic metal particle and non-metallic element can enrich the loss mechanisms and bring abundant heterogeneous interfaces in the composite system, which can enhance the interfacial polarization and relaxation at the interface and increase the scattering of electromagnetic waves. Carbon materials derived from MOFs show excellent properties of high surface area, high porosity, adjustable pore size, high conductivity and stability, and their applications in microwave absorption have become a rapidly expanding research field. Herein, the mechanism and classification of microwave absorption materials are briefly discussed and the advantages of MOFs and carbon-based materials in microwave absorption field are considered. The recent achievements of MOFs derived carbon-based microwave absorption composites are summarized in detail, and the effects of different components and special microstructures are also analyzed. In addition, the current challenges and the research perspectives are also proposed.This article is protected by copyright. All rights reserved.

materials science, multidisciplinary
High-efficiency and Wide-Bandwidth Microwave Absorbers Based on MoS2-coated Carbon Fiber

Weidong Zhang,Xue Zhang,Qing Zhu,Yuan Zheng,Leonarda Francesca Liotta,Hongjing Wu

DOI: https://doi.org/10.1016/j.jcis.2020.10.109

IF: 9.9

2021-01-01

Journal of Colloid and Interface Science

Abstract:Carbon fiber (CF) is a significant multifunction material, which is extensively used in aircraft because of its superb performance. However, its microwave absorption properties (MAPs) are seriously restricted as a result of the impedance mismatch issue. To address this issue, an efficient strategy is conducted by a series of CF@MoS2 and CF@MoS2@Fe3O4 composites that are fabricated by in-situ grown MoS2 nanosheets (MoS2-NS) and Fe3O4 nanoparticles (Fe3O4-NPs) on the surface of CF. The results of microwave absorption performance (MAP) reveal that the minimum reflection loss (RL) can reach -21.4 dB with a CF@MoS2 composite coating thickness of 3.8 mm; the effective attenuation bandwidth (RL < -10 dB, i.e., 90% microwave energy is attenuated) is up to 10.85 GHz (7.15-18.0 GHz). From a detailed analysis, it is observed impedance mismatch is the critical limiting factor for MAPs rather than attenuation. Furthermore, for CF@MoS2@Fe3O4, the MAP is strongly dependent on the level of coating of magnetic Fe3O4-NPs on the surface of CF@MoS2 composites. The mechanisms underlying the superb MAP and related phenomena are investigated, opening new directions for fabricating CF-based microwave absorbers with high efficiency and wide-bandwidth. Finally, the occurrence of multi-reflection phenomena of EM waves in absorbers are critically analyzed. (C) 2020 Elsevier Inc. All rights reserved.
Microwave Absorption Performance of 2D Iron-Quinoid MOF

Huijie Wei,Yu Tian,Qian Chen,Diana Estevez,Peng Xu,Hua-Xin Peng,Faxiang Qin

DOI: https://doi.org/10.1016/j.cej.2020.126637

IF: 15.1

2020-01-01

Chemical Engineering Journal

Abstract:The excellent properties including high porosity, large specific surface area, low density, and strong controllability of metal-organic frameworks (MOFs) make them one of the preferred materials for a plethora of applications. One particular intriguing application, among others, is microwave absorption, to which majority of research has been devoted by using MOF as templates to prepare porous carbon via carbonization. Contrary to such approach, in this study we propose a novel strategy based on leveraging the intrinsic attributes of MOF. Through a simple and rapid microwave solvothermal method, lamellar redox-active iron-quinoid MOFs were synthesized and their morphology and crystallinity are modulated as a function of reaction temperature. The conductivity of the prepared MOF reached up to 2 x 10(-3) S/m, which is comparable to that of semiconductors. In addition, magnetic hysteresis was observed at 300 K. The reaction temperature proved pivotal to attain maximum microwave absorption of -73.5 dB at 13.8 GHz with a matching thickness of 3.3 mm. Effective absorbing bandwidth with a reflection loss below -10 dB can be also gained in a wide frequency range of 9.8-15.9 GHz. The optimal microwave absorbing performance was mainly attributed to the simultaneous implementation of magnetic and electrical loss in a single iron-quinoid MOF resulting in adequate impedance matching through modulable magnetic and electric properties. The developed iron-quinoid MOF material opens up new opportunities to achieve high-efficiency, lightweight and tunable microwave absorbers. The material-structure coupling strategy here is instrumental to developing next-generation high-performance microwave absorbing materials.
Recent Advancement of Magnetic MOF Composites in Microwave Absorption

Wenxuan Feng,Yanyan Liu,Yuxin Bi,Xuewei Su,Chenggang Lu,Xukang Han,Yong Ma,Chao Feng,Mingliang Ma

DOI: https://doi.org/10.1016/j.synthmet.2023.117307

IF: 4

2023-01-01

Synthetic Metals

Abstract:Nowadays, electronic equipment has brought great convenience to people. However, the electromagnetic microwave it generates also brings adverse effects. It is generally hoped to prepare electromagnetic microwave absorption materials with the characteristics of light and thin, wide absorption band and strong absorption performance. Recently, the metal organic framework (MOF) has been regarded as an ideal material. Usually, the combination of magnetic metal and MOF can improve the magnetic loss performance of the material and make the material have a wider application. This paper analyzes and summarizes the latest development of magnetic MOF microwave absorption materials thoroughly, including the classification of magnetic MOF microwave absorption materials, microwave absorption mechanism, design principle and preparation methods. Finally, the development of magnetic MOF microwave absorption materials and the challenges faced in the development process are reasonably prospected, which provides a reference for the development of magnetic MOF microwave absorption materials.
Biomass-Derived Porous Carbon-Based Nanostructures for Microwave Absorption

Huanqin Zhao,Yan Cheng,Wei Liu,Lieji Yang,Baoshan Zhang,Luyuan Paul Wang,Guangbin Ji,Zhichuan J. Xu

DOI: https://doi.org/10.1007/s40820-019-0255-3

2019-03-15

Abstract:HighlightsThe synthetic methods and corresponding mechanisms of porous carbon (PC)-based nanostructures from biomass resource are reviewed.The application of biomass-derived PC in microwave absorption is discussed in terms of structure and composition optimization.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Macro-ordered porous carbon nanocomposites for efficient microwave absorption

Yu Tian,Diana Estevez,Ge Wang,Mengyue Peng,Faxiang Qin

DOI: https://doi.org/10.1016/j.carbon.2023.118614

IF: 10.9

2023-11-18

Carbon

Abstract:Tunable and efficient porous carbon-based microwave absorbers are essential in electromagnetic compatibility and protection due to their pronounced dielectric losses and ultralow density. However, it is still challenging to achieve satisfactory impedance matching and attenuation ability owing to the difficulty of realizing custom-designed porous structures. Herein, we propose a material-structure collaborative approach which includes multi-scaling, component modulation and systematic investigation of macroscopic structures. Macro-ordered porous carbon nanocomposites (MOPCN) assembled with MWCNTs and chitosan (CHI) were fabricated via freeze-casting and MWCNTs/CHI ratio regulation. By simply varying the freezing temperature gradient distribution from radial (R) to axial (A), radial-centrosymmetric and honeycomb-like pore arrays were realized respectively. Compared to the honeycomb-like pore array, the radial-centrosymmetric pore array imparts much stronger microwave attenuation capability due to enhanced phase contiguity and optimized spatial arrangement. Such configuration also enabled to optimize impedance matching and absorption, alleviating the over-dependence of microwave absorption performance on material composition. Optimum absorption of up to −70.6 dB at 9.3 GHz and −72.9 dB at 8.8 GHz were achieved for the MOPCN-1/4-R and MOPCN-1/2-A composites, respectively, with effective absorption band covering the entire X-band at a low filler loading of 1 wt.%. Overall, this study provides a further understanding of the structure-property relationship and paves the way for future exploration of plainified microwave absorbers based on optimized macropore structures while preserving low filler loading.

materials science, multidisciplinary,chemistry, physical
Customizing the structure and chemical composition of ultralight carbon foams for superior microwave absorption performance

Tingting Cheng,Yuying Guo,Yuxin Xie,Laibin Zhao,Ting Wang,Alan Meng,Zhenjiang Li,Meng Zhang

DOI: https://doi.org/10.1016/j.carbon.2023.02.052

IF: 10.9

2023-02-18

Carbon

Abstract:Developing biomass-derived three-dimensional porous carbon materials (porous carbon foam, PCF) has become a common strategy to obtain lightweight and efficient electromagnetic microwave-absorbing materials. Without the introduction of a template and subsequent activation process, several ultra-lightweight honeycomb PCF samples were successfully prepared from dried ballonflower/yamakurage (DB) by simple calcination. In addition, the calcination temperature plays a decisive role in regulating the pore size, composition and microwave absorption properties of PCF samples. Furthermore, it is worth noting that different cutting directions also influenced the hole size of the PCF sample and the microwave absorption performances. Under the combined effects of multiple reflections and scattering of PCF porous structure, dipole polarization of abundant heterogeneous atoms and good conductive loss of carbon material, the vertical cutting sample PCF-900V exhibits optimal microwave absorption performances with the minimal reflection loss (RL min ) value of −46.95 dB at 1.46 mm thickness and the effective absorption bandwidth (EAB) value of 5.52 GHz at 1.72 mm matching thickness respectively, indicating its great potential for application as a promising lightweight and efficient microwave absorbing material.

materials science, multidisciplinary,chemistry, physical
Co3O4 Nanoparticle-Modified Porous Carbons with High Microwave Absorption Performances

Shuangyin Zeng,Shaojie Han,Xiaotian Sun,Li Wang,Yanfeng Gao,Zhang Chen,Haitao Feng

DOI: https://doi.org/10.3390/nano13061073

IF: 5.3

2023-03-16

Nanomaterials

Abstract:Carbon materials derived from natural biomaterials have received increasing attention because of their low cost, accessibility, and renewability. In this work, porous carbon (DPC) material prepared from D-fructose was used to make a DPC/Co3O4 composite microwave absorbing material. Their electromagnetic wave absorption properties were thoroughly investigated. The results show that the composition of Co3O4 nanoparticles with DPC had enhanced microwave absorption (−60 dB to −63.7 dB), reduced the frequency of the maximum reflection loss (RL) (16.9 GHz to 9.2 GHz), and had high reflection loss over a wide range of coating thicknesses (2.78–4.84 mm, highest reflection loss <−30 dB). This work provided a way for further research on the development of biomass-derived carbon as a sustainable, lightweight, high-performance microwave absorber for practical applications.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Porous-carbon-based Mo2C Nanocomposites As Excellent Microwave Absorber: a New Exploration

Sisi Dai,Yan Cheng,Bin Quan,Xiaohui Liang,Wei Liu,Zhihong Yang,Guangbin Ji,Youwei Du

DOI: https://doi.org/10.1039/c8nr01244j

IF: 6.7

2018-01-01

Nanoscale

Abstract:In this study, we report a porous-carbon-based Mo2C nanocomposite (NCs) as the microwave absorber via typical carbothermal reduction using metal-organic frameworks (MOFs) and polyoxometalates (POMs) as the precursors, which have been rarely applied in electromagnetic (EM) wave absorption areas. The elaborately designed NCs not only bring about good impedance matching, but also possess strong dissipation ability due to the large surface areas and porous features. Thanks to the material characteristics as well as structural advantages, the as-prepared Mo2C/C NCs with 20 wt% sample loading exhibit remarkable microwave absorbing performance. The minimum RL value reaches -49.19 dB at matching thickness of 2.6 mm, and the best effective bandwidth (RL < -10 dB) of 4.56 GHz at 1.70 mm was also achieved. Moreover, the NCs overcome the intrinsic drawback of traditional carbon materials, that is, centralized effective absorption always occurred at high frequency (> 10 GHz) and the minimum RL value of the NCs shifted to 9.04 GHz. Clearly, in this study, we not only developed the Mo2C NC as the new light absorber, but also paved the way to synthesize other available transition metal carbides using MOFs and POMs.
Microwave Absorption Enhancement of Porous Carbon Fibers Compared with Carbon Nanofibers

Guang Li,Tianshi Xie,Shenglin Yang,Junhong Jin,Jianming Jiang

DOI: https://doi.org/10.1021/jp300050u

2012-04-13

The Journal of Physical Chemistry C

Abstract:Porous carbon fibers (pores of: 0.1–3 μm in diameter) and carbon nanofibers (∼100 nm in diameter) were prepared from polyacrylonitrile/polymethyl methacrylate (PAN/PMMA) blend fibers with 70/30 and 30/70 weight ratio, respectively, as precursors. The composites containing 2–6 wt % porous carbon fibers or carbon nanofibers as microwave absorbents were fabricated. The complex permittivity of these composites was measured, and the microwave absorption properties were stimulated based on a model for a single-layer plane wave absorber. We found that composites filled with the porous carbon fibers exhibited a much better performance in microwave absorption than those containing the carbon nanofibers. Composites containing 6 wt % porous carbon fibers or carbon nanofibers showed the lowest reflection loss of −31 dB at 9.7 GHz and −12.2 dB at 10.7 GHz, respectively. The bandwidth with reflection loss below −5 dB covered the whole X band (4.2 GHz) in the former case, whereas it was only 2.6 GHz in the latter case, indicating the superior performances of the porous carbon fiber compared with carbon nanofiber in electromagnetic wave absorbing properties. We postulated that the combination of the dielectric-type absorption and the interference of multireflected microwaves could be responsible for the enhancement of microwave absorption in the porous carbon fibers.
Design and microwave absorption characteristics of porous lamellar hard carbon materials

Linlin Liu,Tursunay Yibibulla,Yang Yang,Sibt ul Hassan,Lizhen Hou,Daitao Kuang,James Mead,Lianwen Deng,Shiliang Wang

DOI: https://doi.org/10.2139/ssrn.4651005

IF: 5.876

2024-02-08

Microporous and Mesoporous Materials

Abstract:Porous lamellar hard carbon structures were synthesized using the direct hard template strategy with phenolic resin as the C source and ZnO as the template. The porosity of the hard carbon materials is adeptly fine-tuned by regulating the ZnO nanoparticle content. Notably, the introduction of porosity to lamellar hard carbon materials is shown to have a significant impact on their microwave absorption properties. A porous lamellar hard carbon material with impressive microwave absorption performance is synthesized, culminating in an optimal reflection loss of −45 dB and an effective absorption bandwidth of 4.08 GHz, even at a minimal absorber thickness of ∼2.0 mm, with a mere 16.7% filling rate. These findings illustrate how the control of porosity provides a new design avenue for tailoring the absorption characteristics for microwave absorbers. This design approach will support the further development of versatile microwave absorption solutions, helping to address the prevalence of electromagnetic pollution.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology, applied
MOF‐Fe@C Nanocomposites for Microwave Absorption

Rongjuan Zhang,Qi Hu,Shaobo Yang,Song Yan,Yaxin Gu,Jiawei Ji,Zheng Zhou,Chaoze Liu,Xinran Li,Zihao Wang,Chengchun Tang

DOI: https://doi.org/10.1002/adem.202400527

IF: 3.6

2024-05-30

Advanced Engineering Materials

Abstract:The arrival of the 5G era has brought great benefits to our lives, but it has also brought problems such as electromagnetic radiation. Therefore, the demand for lightweight, high‐performance microwave absorbing materials with wide effective bandwidth is increasing. Herein, MIL‐53/g‐C3N4 was first synthesized from precursors of ferric chloride, terephthalic acid and g‐C3N4, and then thermally annealed at different temperatures to generate MOF‐Fe@C nanocomposites. Heat treatment can effectively carbonize g‐C3N4 to amorphous carbon and reduce iron in MIL‐53 to magnetic Fe and Fe3O4 nanoparticles through carbon‐thermal reduction reaction. The synergistic effect of dielectric loss of amorphous carbon and magnetic losses of magnetic particles enhances attenuation and improves impedance matching, enhancing microwave absorption. The RLmin of MOF‐Fe@C(4)‐700 is as low as ‐72.78 dB at 9.44 GHz at a thickness of 3.18 mm and its effective absorption bandwidth is as broad as 4.88 GHz, covering most of X‐band frequency range. The research introduced a novel technique for synthesizing absorbers with controllable electromagnetic characteristics by incorporating g‐C3N4 as carbon sources into MOF materials. This article is protected by copyright. All rights reserved.

materials science, multidisciplinary
A Review on Metal–Organic Framework-Derived Porous Carbon-Based Novel Microwave Absorption Materials

Zhiwei Zhang,Zhihao Cai,Ziyuan Wang,Yaling Peng,Lun Xia,Suping Ma,Zhanzhao Yin,Yi Huang

DOI: https://doi.org/10.1007/s40820-020-00582-3

2021-01-01

Abstract:Abstract The development of microwave absorption materials (MAMs) is a considerable important topic because our living space is crowed with electromagnetic wave which threatens human’s health. And MAMs are also used in radar stealth for protecting the weapons from being detected. Many nanomaterials were studied as MAMs, but not all of them have the satisfactory performance. Recently, metal–organic frameworks (MOFs) have attracted tremendous attention owing to their tunable chemical structures, diverse properties, large specific surface area and uniform pore distribution. MOF can transform to porous carbon (PC) which is decorated with metal species at appropriate pyrolysis temperature. However, the loss mechanism of pure MOF-derived PC is often relatively simple. In order to further improve the MA performance, the MOFs coupled with other loss materials are a widely studied method. In this review, we summarize the theories of MA, the progress of different MOF-derived PC‐based MAMs, tunable chemical structures incorporated with dielectric loss or magnetic loss materials. The different MA performance and mechanisms are discussed in detail. Finally, the shortcomings, challenges and perspectives of MOF-derived PC‐based MAMs are also presented. We hope this review could provide a new insight to design and fabricate MOF-derived PC-based MAMs with better fundamental understanding and practical application.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Enhanced Electromagnetic Wave Absorption of SiOC/Porous Carbon Composites

Wen Yang,Li Li,Yongzhao Hou,Yun Liu,Xinwei Xiao

DOI: https://doi.org/10.3390/ma15248864

IF: 3.4

2022-12-12

Materials

Abstract:Carbon-based materials have been widely explored as electromagnetic (EM) wave absorbing materials with specific surface areas and low density. Herein, novel porous carbon/SiOC ceramic composites materials (porous C/sp-SiOC) were prepared from the binary mixture, which used the low cost pitch as carbon resource and the polysilylacetylene (PSA) as SiOC ceramic precursor. With the melt-blending-phase separation route, the PSA resin formed micro-spheres in the pitch. Then, numerous SiOC ceramic micro-spheres were generated in porous carbon matrices during the pyrolysis process. By changing the percent of SiOC, the microstructure and wave absorption of porous C/sp-SiOC composites could be adjusted. The synergistic effect of the unique structure, the strong interfacial polarization, and the optimized impedance matching properties contributed to the excellent absorption performance of porous C/sp-SiOC composites. The minimum reflection loss for porous C/sp-SiOC absorber reached −56.85 dB, and the widest effective bandwidth was more than 4 GHz with a thickness of only 1.39 mm. This presented research provides an innovative and practical approach to developing high-performance porous carbon-based microwave absorption materials from green chemistry.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Facile fabrication of metal–organic framework derived Fe/Fe3O4/FeN/N-doped carbon composites coated with PPy for superior microwave absorption

Mingliang Ma,Yuxin Bi,Zhengguo Jiao,Jiewei Yue,Zijian Liao,Yan Wang,Yong Ma,Weibo Huang

DOI: https://doi.org/10.1016/j.jcis.2021.09.169

IF: 9.9

2022-02-01

Journal of Colloid and Interface Science

Abstract:At present, the magnetic metal/carbon composites have been widely explored for microwave absorption (MA), which effectively integrate the characteristics of magnetic and dielectric materials. As a typical material, metal–organic framework (MOF) shows tremendous potential as a precursor or template. However, its development is limited by the inferior impedance matching. Herein, a novel rod-like Fe/Fe3O4/FeN/N-doped carbon (FON/NC) composite was synthesized via dual-ligand strategy and following calcination. The outer polypyrrole (PPy) shell, obtained by a facile polymerization method, effectively optimized the impedance matching and observably enhanced the MA capacity. Both the multi-component loss mechanism and unique porous core–shell structures of MOF-derived composites were beneficial for microwave attenuation. The effects of filler loadings (20 wt%, 25 wt%, 30 wt% and 35 wt%) on electromagnetic (EM) properties of FON/ composites were discussed. Remarkably, as-obtained composites exhibited a minimum reflection loss (RL) value of −60.08 dB at the layer thickness of merely 1.44 mm and the widest effective absorption bandwidth (EAB, RL ≤ −10 dB) of 5.06 GHz at 1.64 mm with 30 wt% filler loading. This work provides a great reference for designing MOF-derived absorbers with high MA performance.

chemistry, physical
Architectural Design of a Multichannel Porous Carbon Fiber for Efficient Electromagnetic Microwave Absorption

Wen-Qi Cui,Xi-Ya Shan,Wan-Jun Cai,Xing-Hai Zhou,Yuan-Lin Yan,Min-Yu Li,Yong-Fang Qian,Yuan Gao,Li-Hua Lyu,Shang-Ru Zhai,Hong-Zhu Liu,Zhong-Gang Wang

DOI: https://doi.org/10.1021/acs.langmuir.4c02887

IF: 3.9

2024-10-22

Langmuir

Abstract:An ingenious microstructure of electromagnetic microwave absorption materials is crucial to achieve strong absorption and a broad bandwidth. Herein, one-dimensional (1D) carbon fibers with implantation of zero-dimensional (0D) ZIF-8-derived carbon frameworks and construction of a three-dimensional (3D) microcosmic multichannel porous structure are fabricated by electro-blown spinning, solvent-thermal reaction, and high-temperature pyrolysis techniques. The 1D carbon fiber skeleton with a multichannel structure provides a direct axial conductive pathway for charge transport, which plays an important role in dielectric loss. The 0D surface carbon frameworks offer plenty of heterogeneous interfaces to trigger intensive interfacial polarization loss and act as dihedral angles for microwave scattering. The 3D microcosmic multichannel pores can not only generate multiple reflections as much as possible to dissipate electromagnetic microwave energy but also supply huge interior cavities to improve impedance matching. Thanks to the synergistic effect of a strong electrically conductive pathway for enhancing the conductive loss, a plenteous heterogeneous interface for triggering intensive interfacial polarization loss, microcosmic multichannel pores for generating multiple reflections and improving impedance matching, and N and O atom doping for inducing dipole polarization, the optimal sample with an ingenious microstructure delivers an excellent absorption performance of a minimum reflection loss of -35.5 dB at a thickness of 5.0 mm and an effective absorption bandwidth of 6.72 GHz (10.96-17.68 GHz) at a thickness of 2.0 mm. Such a well-designed multichannel porous carbon fiber may pave the way for the exploitation of high-performance microwave absorbing materials.
State of the Art and Prospects in Metal-Organic Framework-Derived Microwave Absorption Materials

Shuning Ren,Haojie Yu,Li Wang,Zhikun Huang,Tengfei Lin,Yudi Huang,Jian Yang,Yichuan Hong,Jinyi Liu

DOI: https://doi.org/10.1007/s40820-022-00808-6

2022-02-26

Abstract:Abstract Microwave has been widely used in many fields, including communication, medical treatment and military industry; however, the corresponding generated radiations have been novel hazardous sources of pollution threating human’s daily life. Therefore, designing high-performance microwave absorption materials (MAMs) has become an indispensable requirement. Recently, metal–organic frameworks (MOFs) have been considered as one of the most ideal precursor candidates of MAMs because of their tunable structure, high porosity and large specific surface area. Usually, MOF-derived MAMs exhibit excellent electrical conductivity, good magnetism and sufficient defects and interfaces, providing obvious merits in both impedance matching and microwave loss. In this review, the recent research progresses on MOF-derived MAMs were profoundly reviewed, including the categories of MOFs and MOF composites precursors, design principles, preparation methods and the relationship between mechanisms of microwave absorption and microstructures of MAMs. Finally, the current challenges and prospects for future opportunities of MOF-derived MAMs are also discussed. "Image missing"

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Microwave Absorption Enhancement of 2-Dimensional CoZn/C@MoS2@PPy Composites Derived from Metal-Organic Framework

Yingpu Bi,Mingliang Ma,Yanyan Liu,Zhouyu Tong,Rongzhen Wang,Kwok L. Chung,Aibin Ma,Guanglei Wu,Yong Ma,Changpeng He,Pan Liu,Li-Peng Hu

DOI: https://doi.org/10.1016/j.jcis.2021.04.137

IF: 9.9

2021-01-01

Journal of Colloid and Interface Science

Abstract:Metal-organic framework (MOF) materials have caused widespread concerns in the field of microwave absorption, due to the unique microstructure and electronic state. Herein, the CoZn/[email protected]2@polypyrrole (PPy) composites were prepared through MOF self-template method. The MoS2 sheets and PPy shell incorporated for optimizing impedance matching of two-dimensional (2D) CoZn/C composites. The introduction of MoS2 sheets and PPy shell endowed the composites with enhanced microwave absorption. The as-prepared CoZn/[email protected]2@PPy composites showed a minimum reflection loss (RL) of −49.18 dB with the thickness of 1.5 mm. In addition, the effective absorption bandwidth (EAB, RL values exceeding −10 dB) covered 4.56 GHz, which showed greater performances than CoZn/C composites under a lower thickness (<2 mm). This work not only provides a facile route for fabricating MOF-derived carbon-based composites as microwave absorbers, but also broadens the application of MOF materials.
Sterculia lychnophora seed-derived porous carbon@CoFe2O4 composites with efficient microwave absorption performance

Dongming Zhang,Wei He,Guoqing Quan,Yonglin Wang,Yuanzhang Su,Lei Lei,Yongjie Du,Yan Hong,Shouxu Wang,Yao Tang,Weihua Zhang,Yuanming Chen

DOI: https://doi.org/10.1016/j.apsusc.2022.155027

IF: 6.7

2023-01-01

Applied Surface Science

Abstract:Recently, biomass-derived porous carbon materials demonstrate great potential to develop high-efficient microwave absorbers. Herein, magnetic porous composites consisting of CoFe2O4 nanoparticles and biomass-derived carbon from sterculia lychnophora seeds are prepared via hydrothermal and pyrolysis methods. The dielectric and magnetic properties of composites are modulated by tuning the content of CoFe2O4 nanoparticles to optimize impedance matching characteristics and improve attenuation capabilities. Benefitting from multicomponent compositions and porous structures, the optimized composite exhibits superior microwave absorption performance with the minimum reflection loss value of −67.04 dB at 2.0 mm and an effective absorption bandwidth of 5.52 GHz (11.92–17.44 GHz) at the filler loading of 20 wt%. Besides, the composite achieves strong microwave absorption in multiband (3.92–18 GHz) by adjusting matching thickness. The outstanding microwave absorption properties of magnetic porous composites are attributed to the synergistic effect of interfacial polarization, dipolar polarization, conductive loss, magnetic loss, multiple reflection and scattering of incident microwaves. This work could provide references for the advanced development of biomass-derived porous microwave absorbers.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Hierarchical Fe3o4/Fe@C@Mos2 Core-Shell Nanofibers For Efficient Microwave Absorption

Zhouyu Tong,Zijian Liao,Yanyan Liu,Mingliang Ma,Yuxin Bi,Weibo Huang,Yong Ma,Mingtao Qiao,Guanglei Wu

DOI: https://doi.org/10.1016/j.carbon.2021.04.051

IF: 10.9

2021-01-01

Carbon

Abstract:Designing one-dimensional (1D) magnetic-carbon composites microwave absorbers is a promising strategy that can meet the current demand for high-performance microwave absorption (MA) materials. In this work, hierarchical structured Fe3O4/Fe@C@MoS2 nanofibers were successfully obtained via a simple three-step method. 1D Fe3O4/Fe@C nanofibers were fabricated through electrospinning technology and in-situ polymerization followed by carbonization and reduction in H-2/N-2 atmosphere. MoS2 nanosheets grew irregularly on the surface of 1D Fe3O4/Fe@C nanofibers to form the flower-like structure. The morphology, composition and magnetism of samples were systematically investigated. Furthermore, electromagnetic characteristics and MA properties of Fe3O4/Fe@C nanofibers and Fe3O4/Fe@C@MoS2 nanofibers were compared. The minimum reflection loss (RLmin) of Fe3O4/Fe@C@MoS2 nanofibers could reach -53.79 dB at 11.12 GHz and the corresponding absorption bandwidth (RL < -10 dB) of 4.4 GHz was achieved at the absorber thickness of 2.24 mm. This work combines electrospinning technology with traditional chemical synthesis to prepare a novel 1D core-shell microwave absorber, which provides some inspiration for preparing MA material in the future. (C) 2021 Elsevier Ltd. All rights reserved.

Recent progress of MOF-derived porous carbon materials for microwave absorption

Research Progress of Metal Organic Frameworks/Carbon‐Based Composites for Microwave Absorption

High-efficiency and Wide-Bandwidth Microwave Absorbers Based on MoS2-coated Carbon Fiber

Microwave Absorption Performance of 2D Iron-Quinoid MOF

Recent Advancement of Magnetic MOF Composites in Microwave Absorption

Biomass-Derived Porous Carbon-Based Nanostructures for Microwave Absorption

Macro-ordered porous carbon nanocomposites for efficient microwave absorption

Customizing the structure and chemical composition of ultralight carbon foams for superior microwave absorption performance

Co3O4 Nanoparticle-Modified Porous Carbons with High Microwave Absorption Performances

Porous-carbon-based Mo2C Nanocomposites As Excellent Microwave Absorber: a New Exploration

Microwave Absorption Enhancement of Porous Carbon Fibers Compared with Carbon Nanofibers

Design and microwave absorption characteristics of porous lamellar hard carbon materials

MOF‐Fe@C Nanocomposites for Microwave Absorption

A Review on Metal–Organic Framework-Derived Porous Carbon-Based Novel Microwave Absorption Materials

Enhanced Electromagnetic Wave Absorption of SiOC/Porous Carbon Composites

Facile fabrication of metal–organic framework derived Fe/Fe3O4/FeN/N-doped carbon composites coated with PPy for superior microwave absorption

Architectural Design of a Multichannel Porous Carbon Fiber for Efficient Electromagnetic Microwave Absorption

State of the Art and Prospects in Metal-Organic Framework-Derived Microwave Absorption Materials

Microwave Absorption Enhancement of 2-Dimensional CoZn/C@MoS2@PPy Composites Derived from Metal-Organic Framework

Sterculia lychnophora seed-derived porous carbon@CoFe2O4 composites with efficient microwave absorption performance

Hierarchical Fe3o4/Fe@C@Mos2 Core-Shell Nanofibers For Efficient Microwave Absorption