Abstract:Thermal conductivity enhancement coupled to nanoparticle dispersion stability over time are the two main conflicting requirements to overcome to develop carbon nanomaterial-based nanofluids. Both covalent and non-covalent approaches, having their own advantages and disadvantages, are commonly used for carbon nanotube based nanofluids development. However, they are rarely compared regarding their impact on stability and thermal conductivity performances for the same kind of nanofluid. In this work, multiwalled carbon nanotubes have been chemically modified by both covalent and non-covalent functionalization. For the covalent functionalization, a simple oxidation method is applied. It consists of refluxing the powdered MWCNTs in H 2 SO 4 /HNO 3 at 5 M concentration. For the non-covalent approach, both an anionic (sodium dodecyl sulfate) and a non-ionic (Pluronic P123, comprising poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) in an alternating linear fashion, PEO-PPO-PEO) surfactants were employed at a concentration of 1 wt%. Nanofluids were prepared with multiwalled carbon nanotubes at a fixed concentration of 0.2 wt% for both chemical modification approaches. The oxidation reaction occurs without significant structure damaging as shown by transmission electron microscopy, Raman spectroscopy, Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. UV–visible spectrophotometry analysis shows a remarkable stability with temperature in the 293.15–303.15 K range over one-week and for a longer period of 49 days for all the three types of nanofluids. Their thermal conductivity has been investigated in the same temperature range. For all the three nanofluid series prepared with a fixed concentration of carbon nanomaterials, a thermal conductivity enhancement compared to that of the base fluid has been observed. The thermal conductivity evolution with temperature is different for each type of nanofluid. The covalently oxidized multiwalled carbon nanotube based nanofluids showed the better thermal conductivity enhancement steadiness (around 7 %) with temperature. The discussion on the surfactant-based nanofluid behavior proposes the possible involved mechanisms as temperature increases for each surfactant.

Investigation on hybrid nanofluids based on carbon nanotubes filled with metal nanoparticles: Stability, thermal conductivity, and viscosity

Stability and thermal conductivities of hybrid sphere/tube TiO2 nanofluid

Solidification Behavior of Hybrid Tio2 Nanofluids Containing Nanotubes and Nanoplatelets for Cold Thermal Energy Storage

Experimental study on the thermal conductivity enhancement of water based nanofluids using different types of carbon nanotubes

Thermo-physical properties of water-based single-walled carbon nanotube nanofluid as advanced coolant

Effect of hybrid nanofillers on thermal conductivity of composite phase change materials

Experimental Investigation and Modelling on the Thermal Conductivity of CNTs Based Nanofluids

Thermal Conductivity Enhancements and Viscosity Properties of Water Based Nanofluid Containing Carbon Nanotubes Decorated with Ag Nanoparticles

Experimental Investigation on Stability, Viscosity, and Electrical Conductivity of Water-Based Hybrid Nanofluid of MWCNT-Fe2O3

Investigation into the underlying mechanisms of the improvement of thermal conductivity of the hybrid nanofluids

Studies on Evaluation of the Thermal Conductivity of Alumina Titania Hybrid Suspension Nanofluids for Enhanced Heat Transfer Applications

Influence of Nanoparticles on Thermophysical Properties of Hybrid Nanofluids of Different Volume Fractions

Study on preparation, stability, thermal conductivity, and viscosity of silver nanoparticles-decorated three-dimensional graphene-like porous carbon hybrid nanofluids

Study on thermal conductivity of water-based nanofluids with hybrid suspensions of CNTs/Al2O3 nanoparticles

Progress and prospects on stability and thermal properties of surfactant assisted graphene, carbon nanotubes based nanofluid and their hybrid for next-generation thermal management

An efficient enhancement in thermal conductivity of water-based hybrid nanofluid containing MWCNTs-COOH and Ag nanoparticles: experimental study

Covalent vs. Non covalent chemical modification of multiwalled carbon nanotubes based-nanofluids: Stability and thermal conductivity steadiness over temperature

Temperature Dependence of the Stability and Thermal Conductivity of an Oil-Based Nanofluid

Effect of Temperature on the Effective Thermal Conductivity of N-Tetradecane-Based Nanofluids Containing Copper Nanoparticles

Enhanced thermal conductivity of liquid paraffin based nanofluids containing copper nanoparticles

Investigating the thermal performance of a hybrid Ag-TiO 2 /water nanofluid in a copper porous nanochannel: Examine the meshless molecular dynamics simulation