Experimental study of characteristics of pressure fluctuation in an electrical submersible pump under different flow rates and speeds using time and frequency domain

Dhanasekaran Arumugam,Kumaraswamy Sivasailam
DOI: https://doi.org/10.1007/s40430-021-02983-w
IF: 2.361
2021-05-05
Journal of the Brazilian Society of Mechanical Sciences and Engineering
Abstract:Multistage Electrical Submersible Pumps (ESPs) are employed in agricultural operation as well as oil exploration. The hydraulically induced noise and vibration inside ESP are generated mainly due to the internal pressure fluctuation. The mechanism and characteristics of pressure fluctuation in multistage pump are complex than a single-stage centrifugal pump. Therefore, to investigate the pressure fluctuation in a multistage pump an Electric submersible pump with five stages was selected for conducting experiments. A variable frequency drive (VFD) was used to conduct the test on the pump at various speeds. Piezoresistive pressure transducers were used to capture the pressure fluctuation signals. Tests were conducted at various flow rates and speeds. The captured signals were converted into frequency domain to analyse the characteristics of pressure fluctuation. The obtained results have shown that at the lower flow rate of 0.8<i>Q</i><sub>n</sub> at the higher speed 1.2<i>N</i><sub>n</sub> the maximum amplitude of pressure fluctuation occurred at the stages 1, 2 and 4. At the nominal flow rate of <i>Q</i><sub>n</sub> at the nominal speed <i>N</i><sub>n</sub> the maximum amplitude of pressure fluctuation occurred at the stage 5. At the higher flow rate of 1.2<i>Q</i><sub>n</sub> at the higher speed of 1.2<i>N</i><sub>n</sub> the maximum amplitude of pressure fluctuation at the stages 1, 2 and 4. The pressure fluctuation signals were analysed in order to establish a relationship between the characteristics of pressure fluctuation, operational parameters as well as various stages of ESP to understand the influence of pressure fluctuation inside ESP and to improve its operational stability.
engineering, mechanical
What problem does this paper attempt to address?