Abstract:The microstructural, electrical, and optical properties of Cu-doped and undoped ZnTe thin films grown on glass substrates are covered in this article. To determine the chemical makeup of these materials, both energy-dispersive X-ray (EDAX) spectroscopy and X-ray photoelectron spectroscopy were employed. The cubic zinc-blende crystal structure of ZnTe and Cu-doped ZnTe films was discovered using X-ray diffraction crystallography. According to these microstructural studies, the average crystallite size increased as the amount of Cu doping increased, whereas the microstrain decreased as the crystallinity increased; hence, defects were minimized. The Swanepoel method was used to compute the refractive index, and it was found that the refractive index rises as the Cu doping levels rises. The optical band gap energy was observed to decrease from 2.225 eV to 1.941 eV as the Cu content rose from 0% to 8%, and then slightly increase to 1.965 eV at a Cu concentration of 10%. The Burstein–Moss effect may be connected to this observation. The larger grain size, which lessens the dispersion of the grain boundary, was thought to be the cause of the observed increase in the dc electrical conductivity with an increase in Cu doping. In structured undoped and Cu-doped ZnTe films, there were two carrier transport conduction mechanisms that could be seen. According to the Hall Effect measurements, all the grown films exhibited a p-type conduction behavior. In addition, the findings demonstrated that as the Cu doping level rises, the carrier concentration and the Hall mobility similarly rise, reaching an ideal Cu concentration of 8 at.%, which is due to the fact that the grain size decreases grain boundary scattering. Furthermore, we examined the impact of the ZnTe and ZnTe:Cu (at Cu 8 at.%) layers on the efficiency of the CdS/CdTe solar cells.

Characterization of thin film ZnCdS/CdTe solar cells

Characterization of thin film ZnO/ZnCdS/CuGaSe2 heterojunctions

Characteristics of CdTe Solar Cell Device

High-efficiency CdTe-based Thin-Film Solar Cells with Unltrathin CdS:O Window Layer and Processes with Post Annealing

Numerical simulation on an efficient n-CdS/p-ZnSnN2/p+-Cu2SnS3/p++- CuGaSe2 thin film solar cell

Performance Enhancement of Solar Cells Based on High Photoelectric Conversion Efficiency of H-Bn and Metal Nanoparticles.

Dip coated nanocrystalline CdZnS thin films for solar cell application

Analysis of electrical property parameters of CdS/CdTe solar cells fabricated by close space-sublimation

Performance Study of Cadmium Telluride Solar Cell Featured with Silicon Thin Film Made by Sol-Gel Route

Simulation of the Efficiency of CdS/CdTe Tandem Multi-Junction Solar Cells

Resulting Effect of the p-Type of ZnTe: Cu Thin Films of the Intermediate Layer in Heterojunction Solar Cells: Structural, Optical, and Electrical Characteristics

Highly efficient CdTe solar cell with a thin CIT current booster: theoretical insights

Several Efficiency Influencing Factors in CdTe/CdS Solar Cells

Modeling and optimization of numerical studies on CuSbS 2 thin film solar cell with ∼ 15% efficiency

Highly Efficient Cadmium telluride Solar Cell with a Thin CuInTe2 Current Booster: Theoretical Insights

Thin-Film Solar Cells with 19% Efficiency by Thermal Evaporation of CdSe and CdTe

Doping Behavior of Zn in CdS and Its Effect on the Power Conversion Efficiency of the Cu2ZnSn(S, Se)4 Solar Cell

Comparative study by simulation betweentwo structures CdS/CZTS and ZnS/CZTS via SCAPS-1D software

Structure, Electrical and Optical Properties of ITO Thin Films and Their influence on Performance of CdS/CdTe Thin-Film Solar Cells

DFT studies abided numerical assessment of stable ternary Al 2 CdX 4 (where X = S, Se, Te) chalcogenides for thin film photovoltaics

Effect of Temperature on Photovoltaic Solar Cell Cadmium Telluride Thin Film