Abstract:Metal amorphous nanocomposites (MANCs) are promising soft magnetic materials (SMMs) for power electronic applications offering low power loss at high frequency and maintaining a relatively high flux density. While applications in certain motor designs have been recently modeled, their widespread application awaits scaled manufacturing of MANC materials and proliferation of new higher speed motor designs. A hybrid motor design based on permanent magnets and doubly salient stator and rotor is reported here to develop a compact (a factor of 10 smaller than currently possible in Si steels), high-speed (>1 kHz, electrical), high-power (>2.5 kW) motor by incorporating low loss (<10 W/kg at 1 kHz) MANCs such as recently reported Fe-Ni-based alloys. A feature of this motor design is flux focusing from the permanent magnet allowing use of lower energy permanent magnet chosen from among non-rare earth containing compositions and attractive due to constraints posed by rare earth criticality. A 2-D finite element analysis model reported here indicates that a 2.5 kW hybrid motor may be built with a permanent magnet with a 0.4 T remanence at a rotor speed of 6000 rpm. At a magnetic switching frequency of 1.4 kHz, the core loss may be limited to <3 W by selecting an appropriate MANC SMM. The projected efficiency exceeds 96% not including power loss in the controller. Under full load conditions, the flux density distributions for the SMM stay predominantly <1.3 T, the saturation magnetization of optimized FeNi-based MANC alloys. The maximum demagnetizing field in the permanent magnet is less than $2.2 \times 10^{5}$ A/m sustainable, for example, with a high-grade hard ferrite magnet.

Permanent magnet synchronous motor with axial flux geometry

Performance Analysis of Asymmetric-Excited Flux Reversal Permanent Magnet Linear Machines

Novel Modular-Rotor Switched-Flux Permanent Magnet Machines

Comparison Of Axial Flux Pm Synchronous Motor And Induction Motor By Mathematical And Finite Element Analysis

Bidirectional Cross-Linking Transverse Flux Permanent Magnet Synchronous Motor

A Novel Doubly-Fed Flux-Switching Permanent Magnet Machine with Armature Windings Wound on Both Stator Poles and Rotor Teeth

Bidirectional Crosslinking Transverse Flux Flat Type Permanent Magnet Linear Synchronous Motor

Principle and simulation of a 5-phase bearingless permanent magnet-type synchronous motor

Design and analysis of bidirectional crosslinking transverse flux flat type permanent magnet linear synchronous motor

A Novel Double-Sided Offset Stator Axial-Flux Permanent Magnet Motor for Electric Vehicles

Permanent Magnet Synchronous Reluctance Machines with Axially Combined Rotor Structure

A Novel Axial-Flux Permanent Magnet Vernier Machine with H-Core Stator Modules and Toroidal Windings for Electric Aircraft Propulsion System

Design and Analysis of a Permanent Magnet Frameless Motor

Optimal Design of an Axial Flux Permanent Magnet Motor

A Novel Axial Flux Interior Permanent Magnet Motor with High Torque Density

Parameter Determination and Drive Control Analysis of Axial Flux Permanent Magnet Synchronous Motors

Novel Magnetic Field Modeling Method for a Low-Speed, High-Torque External-Rotor Permanent-Magnet Synchronous Motor

Metal Amorphous Nanocomposite Soft Magnetic Material-Enabled High Power Density, Rare Earth Free Rotational Machines

Concentrated Transverse Flux Permanent Magnetic Propulsive Synchronous Motor

A Novel Axial Flux Stator and Rotor Dual Permanent Magnet Machine

A Novel Flux Switching Permanent Magnet Planar Machine with Natural Decoupling of Two Orthogonal Motions